首先弄懂怎麼設置adb wifi無線調試的功能,如下所示。
1. 手機端開啓adb tcp連接端口
:/$setprop service.adb.tcp.port 5555
:/$stop adbd
:/$start adbd
其中setprop是用來設置系統屬性的,這裏不需要root權限,su即可。可通過adb shell設置,亦可通過手機上安裝的Android terminal設置。
2. 電腦端的設置和使用
連接adb,其中phone_ipaddress和portnumber是指手機的ip和前面設置的監聽端口號(如5555)
adb connect phone_ipaddress:portnumber
直接adb shell或adb -s 設備shell連接設備
如若要斷開則如下:
adb disconnect phone_ipaddress:port
但是每次這樣的去設置很繁瑣,所以直接在設置中做一個開關就把手機端的設置做好,如下所示:
一、打開開關,並連接Wifi
二、打開開關,沒有連接Wifi
三、未打開開關
這樣就可以直接進行adb wifi調試了,手機端就不用每次都先用USB調試去設置修改的屬性,才能激活adb wifi調試。
======================================================================================================
下面來具體說說實現的思路:
第一步:在【設置】-->【開發者選項】中做一個類似於【USB調試】的開關【Wifi調試】
第二步:【Wifi調試】開關打開就激活監聽5555端口,用來進行adb wifi調試,【Wifi調試】開關關閉就不監聽5555端口,這樣就不能進行adb wifi調試
第三步:在第二步中打開關閉【Wifi調試】開關的時候,調用相應的接口進行設置
第四步:將第三步中要調用的接口寫好
1、先在佈局中加入該開關
首先找到佈局文件,packages/apps/Settings/res/xml/development_prefs.xml,找到【USB調試】開關的相應代碼,然後再裏面加一個【Wifi調試】開關,代碼如下:
<SwitchPreference
android:key="enable_adb"
android:title="@string/enable_adb"
android:summary="@string/enable_adb_summary"/>
<!-- added by ouyang start -->
<SwitchPreference
android:key="enable_wifi_adb"
android:title="@string/enable_wifi_adb"
android:summary="@string/enable_wifi_adb_summary"/>
<!-- added by ouyang end -->
上面代碼中,第一個代碼是【USB調試】開關的代碼,第二個是我加的【Wifi調試】開關的代碼,然後爲什麼的字符串做相應的國際化操作,代碼如下:packages/apps/Settings/res/values-zh-rCN/strings.xml 中加入:
<!-- added by ouyang start 2015-12-17 -->
<string name="enable_wifi_adb">Wifi調試</string>
<string name="enable_wifi_adb_openwifi">Wifi沒連接,請連接wifi</string>
<string name="enable_wifi_adb_summary">連接Wifi後啓用調試模式</string>
<string name="enable_wifi_adb_connected_summary">Wifi調試已打開,在電腦端你可以輸入以下命令進行調試:\n
adb connect <xliff:g id="ip_address">%1$s</xliff:g>:5555</string>
<!-- added by ouyang end 2015-12-17 -->
packages/apps/Settings/res/values/strings.xml 中加入:
<!-- added by ouyang start 2015-12-17 -->
<string name="enable_wifi_adb">Wifi debugging</string>
<string name="enable_wifi_adb_openwifi">Wifi is not connected,please turn wifi on and connect it</string>
<string name="enable_wifi_adb_summary">Debug mode when Wifi is connected</string>
<string name="enable_wifi_adb_connected_summary">adb wifi is on,from your computer run:\n
adb connect <xliff:g id="ip_address">%1$s</xliff:g>:5555</string>
<!-- added by ouyang end 2015-12-17 -->
2、在packages/apps/Settings/src/com/android/settings/DevelopmentSettings.java文件中,對剛纔加入的【Wifi調試】開關進行相關的邏輯處理。
首先先定義開關的幾個變量,如下:
//add by ouyang 2015-12-17 start
private static final String ENABLE_WIFI_ADB = "enable_wifi_adb";
private static final String ADB_WIFI_ENABLED_KEY = "ADB_WIFI_ENABLED";
private static SwitchPreference mEnableWifiAdb;
//add by ouyang 2015-12-17 end
然後再onCreate()方法中初始化【Wifi調試】開關,如下:
mEnableAdb = findAndInitSwitchPref(ENABLE_ADB);
//add by ouyang 2015-12-17
mEnableWifiAdb = findAndInitSwitchPref(ENABLE_WIFI_ADB);
然後在onPreferenceTreeClick(PreferenceScreen preferenceScreen, Preference preference)方法中對【Wifi調試】開關的打開和關閉操作做邏輯處理。 if (preference == mEnableAdb) {
if (mEnableAdb.isChecked()) {
mDialogClicked = false;
if (mAdbDialog != null) dismissDialogs();
mAdbDialog = new AlertDialog.Builder(getActivity()).setMessage(
getActivity().getResources().getString(R.string.adb_warning_message))
.setTitle(R.string.adb_warning_title)
.setPositiveButton(android.R.string.yes, this)
.setNegativeButton(android.R.string.no, this)
.show();
mAdbDialog.setOnDismissListener(this);
} else {
Settings.Global.putInt(getActivity().getContentResolver(),
Settings.Global.ADB_ENABLED, 0);
mVerifyAppsOverUsb.setEnabled(false);
mVerifyAppsOverUsb.setChecked(false);
/// M: ALPS01256802, The "Developer options" status is opened.
onPreferenceTreeClick(null, mVerifyAppsOverUsb);
updateBugreportOptions();
}
}
//add by ouyang 2015-12-17 start
else if (preference == mEnableWifiAdb) {
if (mEnableWifiAdb.isChecked()) {
Settings.Global.putInt(getActivity().getContentResolver(),ADB_WIFI_ENABLED_KEY, 1);
android.os.SystemProperties.set("sys.connect.adb.wifi","1");
WifiManager wifiManager = (WifiManager)getSystemService(Context.WIFI_SERVICE);
WifiInfo wifiInfo = wifiManager.getConnectionInfo();
int ipAddress = wifiInfo.getIpAddress();
String ipAddressString = (ipAddress & 0xFF ) + "." +((ipAddress >> 8 ) & 0xFF) + "." +
((ipAddress >> 16 ) & 0xFF) + "." +( ipAddress >> 24 & 0xFF) ;
Log.i(TAG, "ipAddress="+ipAddress);
Log.i(TAG, "ipAddressString="+ipAddressString);
if ("0.0.0.0".equals(ipAddressString)) {
mEnableWifiAdb.setSummary(getResources().getString(R.string.enable_wifi_adb_openwifi));
}else{
mEnableWifiAdb.setSummary(getResources().
getString(R.string.enable_wifi_adb_connected_summary,ipAddressString));
}
} else {
Settings.Global.putInt(getActivity().getContentResolver(),ADB_WIFI_ENABLED_KEY, 0);
android.os.SystemProperties.set("sys.connect.adb.wifi","0");
mEnableWifiAdb.setSummary(getResources().getString(R.string.enable_wifi_adb_summary));
}
}
//add by ouyang 2015-12-17 end
上面的代碼主要是,
當【Wifi調試】開關打開的時候,保存一個原來表示該【Wifi調試】開關打開關閉的狀態的值爲1,然後調用接口android.os.SystemProperties.set("sys.connect.adb.wifi","1");如果wifi這個時候打開就顯示相應的adb wifi命令,如ip地址爲192.168.107.201的時候就顯示,"Wifi調試已打開,在電腦端你可以輸入以下命令進行調試:adb connect 192.168.107.201:5555";如果wifi爲打開,就提示“Wifi沒連接,請連接wifi”
當【Wifi調試】開關關閉的時候,保存一個原來表示該【Wifi調試】開關打開關閉的狀態的值爲0,然後調用接口android.os.SystemProperties.set("sys.connect.adb.wifi","0");
ADB_WIFI_ENABLED_KEY這個狀態值,在進入該Activity的時候,如果上次打開了【Wifi調試】開關,那麼下次進來的時候就要顯示【Wifi調試】開關是打開狀態,否則是關閉狀態。下面說說ADB_WIFI_ENABLED_KEY這個狀態值的相關代碼,如下:
在onResume()方法中,加入下面代碼:
//add by ouyang 2015-12-17 start
IntentFilter filter = new IntentFilter();
filter.addAction(WifiManager.NETWORK_STATE_CHANGED_ACTION);
filter.addAction(WifiManager.WIFI_STATE_CHANGED_ACTION);
filter.addAction(ConnectivityManager.CONNECTIVITY_ACTION);
getActivity().registerReceiver(wifiBroadcastReceiver, filter);
boolean isAdbWifiChecked = Settings.Global.getInt(getActivity().getContentResolver(),ADB_WIFI_ENABLED_KEY, 0) != 0;
mEnableWifiAdb.setChecked(isAdbWifiChecked);
Log.i(TAG, "isAdbWifiChecked:" + isAdbWifiChecked);
//add by ouyang 2015-12-17 end
代碼的意思是,進入該Activity就動態的註冊一個廣播,用來監聽Wifi的狀態改變的,然後來動態的顯示Android手機獲取的IP地址。然後根據ADB_WIFI_ENABLED_KEY這個狀態值來顯示【Wifi調試】開關的打開關閉狀態。在updateAllOptions()方法中,也要去做下處理,代碼如下:
/// M: CR ALPS00244115. Lock and unlock screen, the "USB debugging" is unchecked.
boolean isChecked = (mAdbDialog != null && mAdbDialog.isShowing()) ? true :
(Settings.Global.getInt(cr, Settings.Global.ADB_ENABLED, 0) != 0);
updateSwitchPreference(mEnableAdb, isChecked);
//add by ouyang 2015-12-17 start
boolean isAdbWifiChecked = Settings.Global.getInt(cr,ADB_WIFI_ENABLED_KEY, 0) != 0;
updateSwitchPreference(mEnableWifiAdb, isAdbWifiChecked);
//add by ouyang 2015-12-17 end
/// M: update usb preference again
mExt.customUSBPreference(mEnableAdb);
//add by ouyang 2015-12-17
mExt.customUSBPreference(mEnableWifiAdb);
下面來說說上面動態註冊的廣播,代碼如下:
BroadcastReceiver wifiBroadcastReceiver = new BroadcastReceiver() {
@Override
public void onReceive(Context context, Intent intent) {
String TAG = "wifiBroadcastReceiver";
boolean isAdbWifiChecked = mEnableWifiAdb.isChecked();
ConnectivityManager connectivityManager = (ConnectivityManager) context
.getSystemService(Context.CONNECTIVITY_SERVICE);
NetworkInfo net = connectivityManager.getActiveNetworkInfo();
if (net == null) {
Log.i(TAG, "No net type");
if (isAdbWifiChecked) {
mEnableWifiAdb.setSummary(getResources()
.getString(R.string.enable_wifi_adb_openwifi));
}
} else {
Log.i(TAG, "Net Type:" + net.getTypeName());
}
State wifi = connectivityManager.getNetworkInfo(ConnectivityManager.TYPE_WIFI).getState();
if (wifi == State.CONNECTED || wifi == State.CONNECTING) {
Log.i(TAG, "wifi connected");
WifiManager wifiManager = (WifiManager) context.getSystemService(Context.WIFI_SERVICE);
WifiInfo wifiInfo = wifiManager.getConnectionInfo();
int ipAddress = wifiInfo.getIpAddress();
String ipAddressString = (ipAddress & 0xFF) + "." + ((ipAddress >> 8) & 0xFF) + "."
+ ((ipAddress >> 16) & 0xFF) + "." + (ipAddress >> 24 & 0xFF);
if (isAdbWifiChecked) {
mEnableWifiAdb.setSummary(
getResources().getString(
R.string.enable_wifi_adb_connected_summary, ipAddressString));
}
Log.i(TAG, getResources().getString(
R.string.enable_wifi_adb_connected_summary, ipAddressString));
} else if (wifi == State.DISCONNECTED || wifi == State.DISCONNECTING) {
Log.i(TAG, "wifi disconnected");
if (isAdbWifiChecked) {
mEnableWifiAdb.setSummary(
getResources().getString(R.string.enable_wifi_adb_openwifi));
}
Log.i(TAG, getResources().getString(
R.string.enable_wifi_adb_connected_summary));
}
}
};
上面的代碼主要是當【Wifi調試】開關打開的時候,來用動態表示Android手機的Wifi連接狀態,如果wifi未連接,就提示“Wifi沒連接,請連接wifi”,如果Wifi連接了,就動態的將從DHCP服務器獲取的IP地址顯示出來,如ip地址爲192.168.107.201的時候就顯示,"Wifi調試已打開,在電腦端你可以輸入以下命令進行調試:adb connect 192.168.107.201:5555"
======================================================================================================
好吧,在packages/apps/Settings/,即Settings APP層面的代碼寫完了,下面來說說調用的兩個接口怎麼實現。
android.os.SystemProperties.set("sys.connect.adb.wifi", "1");
android.os.SystemProperties.set("sys.connect.adb.wifi", "0");
首先找到frameworks/base/core/java/android/os/SystemProperties.java文件,找到set(String key, String val)方法,代碼如下,發現調用了native_set(key, val)方法。
/**
* Set the value for the given key.
* @throws IllegalArgumentException if the key exceeds 32 characters
* @throws IllegalArgumentException if the value exceeds 92 characters
*/
public static void set(String key, String val) {
if (key.length() > PROP_NAME_MAX) {
throw new IllegalArgumentException("key.length > " + PROP_NAME_MAX);
}
if (val != null && val.length() > PROP_VALUE_MAX) {
throw new IllegalArgumentException("val.length > " +
PROP_VALUE_MAX);
}
native_set(key, val);
}
native_set(key, val)方法定義如下:
private static native void native_set(String key, String def);
該接口類在初始化運行環境中註冊對應的cpp接口android_os_SystemProperties.cpp,實際操作通過JNI調用的是cpp文件對應的接口:
frameworks/base/core/jni/AndroidRuntime.cpp
namespace android {
extern int register_android_os_SystemProperties(JNIEnv *env);
}
frameworks/base/core/jni/android_os_SystemProperties.cpp
static void SystemProperties_set(JNIEnv *env, jobject clazz,
jstring keyJ, jstring valJ)
{
int err;
const char* key;
const char* val;
if (keyJ == NULL) {
jniThrowNullPointerException(env, "key must not be null.");
return ;
}
key = env->GetStringUTFChars(keyJ, NULL);
if (valJ == NULL) {
val = ""; /* NULL pointer not allowed here */
} else {
val = env->GetStringUTFChars(valJ, NULL);
}
err = property_set(key, val);
env->ReleaseStringUTFChars(keyJ, key);
if (valJ != NULL) {
env->ReleaseStringUTFChars(valJ, val);
}
if (err < 0) {
ALOGE("setproperty key=%s value=%s err=%d\n", key, val, err);
jniThrowException(env, "java/lang/RuntimeException",
"failed to set system property");
}
}
好了,關於該android.os.SystemProperties.set()方法的分析,可以參考
http://blog.csdn.net/ameyume/article/details/8056492
http://www.blogjava.net/anymobile/articles/301989.html
下面直接寫下面兩個接口的實現
android.os.SystemProperties.set("sys.connect.adb.wifi", "1");
android.os.SystemProperties.set("sys.connect.adb.wifi", "0");
在device/lentek/lentk6735_66t_l1/E580/init.rc文件中加入下面的代碼,其中E580是項目的名稱。
#added by ouyang start connect adb with wifi
on property:sys.connect.adb.wifi=1
setprop service.adb.tcp.port 5555
stop adbd
start adbd
on property:sys.connect.adb.wifi=0
setprop service.adb.tcp.port ""
stop adbd
start adbd
#added by ouyang end connect adb with wifi
上面代碼就是當調用android.os.SystemProperties.set("sys.connect.adb.wifi", "1");和sys.connect.adb.wifiandroid.os.SystemProperties.set("sys.connect.adb.wifi", "0");接口的時候的具體實現,
即"sys.connect.adb.wifi"屬性設置爲1的時候,監聽5555端口,
"sys.connect.adb.wifi"屬性設置爲0的時候,不監聽任何端口
====================================================================================
好了,下面來再一次測一測該功能怎麼樣,重新打開wifi,重新打開【Wifi調試】開關,顯示如下:
可以看出來,此時Android手機的IP地址是192.168.107.168,因此下面在PC端測試看是否可以用adb wifi無線調試,使用命令adb connect 192.168.107.168連接,adb disconnect 192.168.107.168斷開連接,如下圖所示:
C:\Documents and Settings\Administrator>adb connect 192.168.107.168
connected to 192.168.107.168:5555
C:\Documents and Settings\Administrator>adb shell
shell@lentk6735_66t_l1:/ $ ll
drwxr-xr-x root root 2015-12-21 10:15 acct
drwxrwx--- system cache 2015-12-17 19:01 cache
lrwxrwxrwx root root 1970-01-01 08:00 charger -> /sbin/healthd
dr-x------ root root 2015-12-21 10:15 config
drwxr-xr-x root root 2015-12-21 10:15 custom
lrwxrwxrwx root root 2015-12-21 10:15 d -> /sys/kernel/debug
drwxrwx--x system system 2015-12-21 10:16 data
-rw-r--r-- root root 385 1970-01-01 08:00 default.prop
drwxr-xr-x root root 2015-12-21 10:15 dev
-rw-r--r-- root root 127 1970-01-01 08:00 enableswap.sh
lrwxrwxrwx root root 2015-12-21 10:15 etc -> /system/etc
-rw-r--r-- root root 1851 1970-01-01 08:00 factory_init.project.rc
-rw-r--r-- root root 18861 1970-01-01 08:00 factory_init.rc
-rw-r--r-- root root 31413 1970-01-01 08:00 file_contexts
-rw-r----- root root 1980 1970-01-01 08:00 fstab.mt6735
-rwxr-x--- root root 543928 1970-01-01 08:00 init
-rwxr-x--- root root 605 1970-01-01 08:00 init.aee.rc
-rwxr-x--- root root 2065 1970-01-01 08:00 init.c2k.rc
-rwxr-x--- root root 1071 1970-01-01 08:00 init.environ.rc
-rwxr-x--- root root 3548 1970-01-01 08:00 init.modem.rc
-rwxr-x--- root root 45152 1970-01-01 08:00 init.mt6735.rc
-rwxr-x--- root root 32013 1970-01-01 08:00 init.mt6735.usb.rc
-rwxr-x--- root root 963 1970-01-01 08:00 init.no_ssd.rc
-rwxr-x--- root root 4411 1970-01-01 08:00 init.project.rc
-rwxr-x--- root root 22787 1970-01-01 08:00 init.rc
-rwxr-x--- root root 972 1970-01-01 08:00 init.recovery.mt6735.rc
-rwxr-x--- root root 2288 1970-01-01 08:00 init.trace.rc
-rwxr-x--- root root 3885 1970-01-01 08:00 init.usb.rc
-rwxr-x--- root root 583 1970-01-01 08:00 init.xlog.rc
-rwxr-x--- root root 301 1970-01-01 08:00 init.zygote32.rc
-rwxr-x--- root root 531 1970-01-01 08:00 init.zygote64_32.rc
-rw-r--r-- root root 1004 1970-01-01 08:00 meta_init.c2k.rc
-rw-r--r-- root root 1062 1970-01-01 08:00 meta_init.modem.rc
-rw-r--r-- root root 1655 1970-01-01 08:00 meta_init.project.rc
-rw-r--r-- root root 14464 1970-01-01 08:00 meta_init.rc
drwxrwxr-x root system 2015-12-21 10:15 mnt
drwxrws--- root system 2015-12-17 18:59 nvdata
drwxrwx--x system system 2015-12-21 10:15 persist
dr-xr-xr-x root root 1970-01-01 08:00 proc
-rw-r--r-- root root 9326 1970-01-01 08:00 property_contexts
drwxrwx--- system system 2015-12-17 18:59 protect_f
drwxrwx--- system system 2015-12-17 18:59 protect_s
drwx------ root root 2015-12-05 18:05 root
drwxr-x--- root root 1970-01-01 08:00 sbin
lrwxrwxrwx root root 2015-12-21 10:15 sdcard -> /storage/sdcard0
-rw-r--r-- root root 471 1970-01-01 08:00 seapp_contexts
-rw-r--r-- root root 80 1970-01-01 08:00 selinux_version
-rw-r--r-- root root 258377 1970-01-01 08:00 sepolicy
-rw-r--r-- root root 11419 1970-01-01 08:00 service_contexts
drwxr-x--x root sdcard_r 2015-12-21 10:15 storage
dr-xr-xr-x root root 2015-12-21 10:15 sys
drwxr-xr-x root root 1970-01-01 08:00 system
-rw-r--r-- root root 8642 1970-01-01 08:00 ueventd.rc
lrwxrwxrwx root root 2015-12-21 10:15 vendor -> /system/vendor
shell@lentk6735_66t_l1:/ $ exit
C:\Documents and Settings\Administrator>adb disconnect 192.168.107.168
發現可以正常的進行adb wifi 無線調試了。將【Wifi調試】開關【Wifi調試】開關關閉,再去連接的話,就會無法連接了。如下所示:
C:\Documents and Settings\Administrator>adb connect 192.168.107.168
unable to connect to 192.168.107.168:5555
C:\Documents and Settings\Administrator>