centos系统LNMP环境配置（四） PHP编译安装

安装前提
1、检查系统是否安装Mysql，如果没有查找到目录信息，表示没有安装

find -name mysql

2、安装必备软件(参考centos系统LNMP环境配置（一） 初始安装配置)

yum -y install libxml2 libxml2-devel openssl openssl-devel bzip2 bzip2-devel 
libcurl libcurl-devel libjpeg libjpeg-devel  libevent libpng libpng-devel freetype freetype-devel 
gmp gmp-devel libmcrypt libmcrypt-devel readline readline-devel libxslt libxslt-devel  gd gd-devel

3、源码包安装libiconv

[root@admin src]wget http://ftp.gnu.org/gnu/libiconv/libiconv-1.14.tar.gz
[root@admin src]tar zxvf libiconv-1.14.tar.gz
[root@admin src]cd libiconv-1.14/
[root@admin libiconv]./configure --prefix=/usr/local/libiconv
[root@admin libiconv]mkdir /usr/local/libiconv
[root@admin libiconv]make & make install```

4、安装libmcrypt
```[root@admin src] wget https://sourceforge.mirrorservice.org/m/mc/mcrypt/Libmcrypt/2.5.8/libmcrypt-2.5.8.tar.gz
[root@admin src] tar zxvf libmcrypt-2.5.8.tar.gz
[root@admin src] cd libmcrypt-2.5.8/
[root@admin libmcrypt] mkdir /usr/local/libmcrypt/
[root@admin libmcrypt] ./configure --prefix=/usr/local/libmcrypt/
[root@admin libmcrypt] make & make install```

5、如果是centos64位系统，添加动态链接库 ,该文件可能不存在，不存在则创建一个新的




<div class="se-preview-section-delimiter"></div>

```[root@admin src] vi /etc/ld.so.conf.d/local.conf  
    /usr/local/lib       # 默认库
    /usr/local/lib64   # 64位系统的除了添加上一行，还需要添加此行
    /usr/local/libmcrypt/lib/ #libmcrypt和Mysql是手动编译的需要添加
    /usr/local/mysql/lib/
    :wq         # 保存退出
    [root@admin src] ldconfig -v  # 使配置生效```


**PHP编译安装**
1、下载php7源码包
```[root@admin src] wget -O php7.tar.gz http://cn2.php.net/get/php-7.0.1.tar.gz/from/this/mirror
[root@admin src] tar -xvf php7.tar.gz
[root@admin src] cd php-7.0.1```

2、开始编译PHP（支持Nginx），将php安装在/usr/local/php7下




<div class="se-preview-section-delimiter"></div>

```[root@admin php] ./configure \
--prefix=/usr/local/php7 \
--with-config-file-path=/etc \
--enable-fpm \
--with-fpm-user=nginx  \
--with-fpm-group=nginx \
--enable-inline-optimization \
--enable-debug \
--disable-rpath \
--enable-shared  \
--enable-soap \
--with-xmlrpc \
--with-openssl \
--with-mcrypt=/usr/local/libmcrypt \
--with-mhash \
--with-pcre-regex \
--with-sqlite3 \
--with-zlib \
--enable-bcmath \
--with-iconv \
--with-iconv-dir=/usr/local/libiconv \
--with-bz2 \
--enable-calendar \
--with-curl \
--with-cdb \
--enable-dom \
--enable-exif \
--enable-fileinfo \
--enable-filter \
--with-pcre-dir \
--enable-ftp \
--with-gd \
--with-openssl-dir \
--with-jpeg-dir \
--with-png-dir \
--with-freetype-dir \
--enable-gd-native-ttf \
--enable-gd-jis-conv \
--with-gettext \
--with-gmp \
--with-mhash \
--enable-json \
--enable-mbstring \
--enable-mbregex \
--enable-mbregex-backtrack \
--with-libmbfl \
--with-onig \
--enable-pdo \
--with-mysqli=mysqlnd \
--with-pdo-mysql=mysqlnd \
--with-zlib-dir \
--with-pdo-sqlite \
--with-readline \
--enable-session \
--enable-shmop \
--enable-simplexml \
--enable-sockets  \
--enable-sysvmsg \
--enable-sysvsem \
--enable-sysvshm \
--enable-wddx \
--with-libxml-dir \
--with-xsl \
--enable-zip \
--enable-mysqlnd-compression-support \
--with-pear \
--enable-opcache```

``make && make install ``
编译过程中，缺少什么就直接yum安装即可

3、复制PHP配置文件
```[root@admin php] cp php.ini-production  /usr/local/php7/etc/php.ini
    [root@admin php] cp php.ini-production  /etc/php.ini```

4、 拷贝模板文件为php-fpm配置文件




<div class="se-preview-section-delimiter"></div>

```[root@admin php] cp /usr/local/php7/etc/php-fpm.conf.default /usr/local/php7/etc/php-fpm.conf
    [root@admin php] vi /usr/local/php7/etc/php-fpm.conf     // 编辑配置 取消pid前面的分号
    pid = run/php-fpm.pid```

**配置php-fpm**
1、配置php-fpm 
```[root@admin php] cp /usr/local/php7/etc/php-fpm.d/www.conf.default /usr/local/php7/etc/php-fpm.d/www.conf 
    [root@admin php] vi /usr/local/php7/etc/php-fpm.d/www.conf          // 编辑
    user = www               // 设置php-fpm运行账号为www 默认账号为nginx 
    group = www            // 设置php-fpm运行组为www```

2、php-fpm启动脚本





<div class="se-preview-section-delimiter"></div>

! /bin/sh

BEGIN INIT INFO

Provides: php-fpm

Required-Start: remotefs$remot{e}_{f}s$ network

Required-Stop: remotefs$remot{e}_{f}s$ network

Default-Start: 2 3 4 5

Default-Stop: 0 1 6

Short-Description: starts php-fpm

Description: starts the PHP FastCGI Process Manager daemon

END INIT INFO

prefix=/usr/local/php7
exec_prefix=${prefix}

php_fpm_BIN=execprefix/sbin/php−fpmphpfpmCONF=$exe{c}_{p}refix/sbin/php-fpmph{p}_{f}p{m}_{C}ONF=$ {prefix}/etc/php-fpm.conf
php_fpm_PID=${prefix}/var/run/php-fpm.pid

php_opts=”–fpm-config $php_fpm_CONF”

wait_for_pid () {
try=0

while test $try -lt 35 ; do

    case "$1" in
        'created')
        if [ -f "$2" ] ; then
            try=''
            break
        fi
        ;;

        'removed')
        if [ ! -f "$2" ] ; then
            try=''
            break
        fi
        ;;
    esac

    echo -n .
    try=`expr $try + 1`
    sleep 1

done

}

case “$1” in
start)
echo -n “Starting php-fpm “

    $php_fpm_BIN $php_opts

    if [ "$?" != 0 ] ; then
        echo " failed"
        exit 1
    fi

    wait_for_pid created $php_fpm_PID

    if [ -n "$try" ] ; then
        echo " failed"
        exit 1
    else
        echo " done"
    fi
;;

stop)
    echo -n "Gracefully shutting down php-fpm "

    if [ ! -r $php_fpm_PID ] ; then
        echo "warning, no pid file found - php-fpm is not running ?"
        exit 1
    fi

    kill -QUIT `cat $php_fpm_PID`

    wait_for_pid removed $php_fpm_PID

    if [ -n "$try" ] ; then
        echo " failed. Use force-quit"
        exit 1
    else
        echo " done"
    fi
;;

force-quit)
    echo -n "Terminating php-fpm "

    if [ ! -r $php_fpm_PID ] ; then
        echo "warning, no pid file found - php-fpm is not running ?"
        exit 1
    fi

    kill -TERM `cat $php_fpm_PID`

    wait_for_pid removed $php_fpm_PID

    if [ -n "$try" ] ; then
        echo " failed"
        exit 1
    else
        echo " done"
    fi
;;

restart)
    $0 stop
    $0 start
;;

reload)

    echo -n "Reload service php-fpm "

    if [ ! -r $php_fpm_PID ] ; then
        echo "warning, no pid file found - php-fpm is not running ?"
        exit 1
    fi

    kill -USR2 `cat $php_fpm_PID`

    echo " done"
;;

*)
    echo "Usage: $0 {start|stop|force-quit|restart|reload}"
    exit 1
;;

esac

3、设置php-fpm开机自启动
[root@admin src] mv php-fpm /etc/init.d/ // 移动php-fpm脚本到init.d目录下
[root@admin src] chmod a+x /etc/init.d/php-fpm // 添加执行权限
[root@admin src] chkconfig –add php-fpm // 添加开机启动配置
[root@admin src] chkconfig –level 2345 php-fpm on // 配置开机启动权限级别“`

[root@admin php] ./configure \
--prefix=/usr/local/php7 \
--with-config-file-path=/etc \
--enable-fpm \
--with-fpm-user=nginx \
--with-fpm-group=nginx \
--enable-inline-optimization \
--enable-debug \
--disable-rpath \
--enable-shared \
--enable-soap \
--with-xmlrpc \
--with-openssl \
--with-mcrypt=/usr/local/libmcrypt \
--with-mhash \
--with-pcre-regex \
--with-sqlite3 \
--with-zlib \
--enable-bcmath \
--with-iconv \
--with-iconv-dir=/usr/local/libiconv \
--with-bz2 \
--enable-calendar \
--with-curl \
--with-cdb \
--enable-dom \
--enable-exif \
--enable-fileinfo \
--enable-filter \
--with-pcre-dir \
--enable-ftp \
--with-gd \
--with-openssl-dir \
--with-jpeg-dir \
--with-png-dir \
--with-freetype-dir \
--enable-gd-native-ttf \
--with-gettext \
--with-gmp \
--with-mhash \
--enable-json \
--enable-mbstring \
--enable-mbregex \
--enable-mbregex-backtrack \
--with-libmbfl \
--with-onig \
--enable-pdo \
--with-mysqli=mysqlnd \
--with-pdo-mysql=mysqlnd \
--with-zlib-dir \
--with-pdo-sqlite \
--with-readline \
--enable-session \
--enable-shmop \
--enable-simplexml \
--enable-sockets \
--enable-sysvmsg \
--enable-sysvsem \
--enable-sysvshm \
--enable-wddx \
--with-libxml-dir \
--with-xsl \
--enable-zip \
--enable-mysqlnd-compression-support \
--with-pear \
--enable-opcache

make && make install
编译过程中，缺少什么就直接yum安装即可

3、复制PHP配置文件
[root@admin php] cp php.ini-production /usr/local/php7/etc/php.ini
[root@admin php] cp php.ini-production /etc/php.ini

4、 拷贝模板文件为php-fpm配置文件