• @Controller • @Service • @Autowired • @RequestMapping • @RequestParam • @ModelAttribute • @Cacheable • @CacheFlush • @Resource • @PostConstruct • @PreDestroy • @Repository • @Component (不推薦使用) • @Scope • @SessionAttributes • @InitBinder • @Required • @Qualifier @Controller • 例如 @Controller public class SoftCreateController extends SimpleBaseController {} • 或者 @Controller("softCreateController") • 說明 @Controller 負責註冊一個bean 到spring 上下文中,bean 的ID 默認爲類名稱開頭字母小寫 @Service • 例如 @Service public class SoftCreateServiceImpl implements ISoftCreateService {} • 或者 @Service("softCreateServiceImpl") • 說明 @Service 負責註冊一個bean 到spring 上下文中,bean 的ID 默認爲類名稱開頭字母小寫 @Autowired • 例如 @Autowired private ISoftPMService softPMService; • 或者 @Autowired(required=false) private ISoftPMService softPMService = new SoftPMServiceImpl(); • 說明 @Autowired 根據bean 類型從spring 上線文中進行查找,註冊類型必須唯一,否則報異常。與@Resource 的區別在於,@Resource 允許通過bean 名稱或bean 類型兩種方式進行查找@Autowired(required=false) 表示,如果spring 上下文中沒有找到該類型的bean 時, 纔會使用new SoftPMServiceImpl(); @Autowired 標註作用於 Map 類型時,如果 Map 的 key 爲 String 類型,則 Spring 會將容器中所有類型符合 Map 的 value 對應的類型的 Bean 增加進來,用 Bean 的 id 或 name 作爲 Map 的 key。 @Autowired 還有一個作用就是,如果將其標註在 BeanFactory 類型、ApplicationContext 類型、ResourceLoader 類型、ApplicationEventPublisher 類型、MessageSource 類型上,那麼 Spring 會自動注入這些實現類的實例,不需要額外的操作。 @RequestMapping • 類 @Controller @RequestMapping("/bbtForum.do") public class BbtForumController { @RequestMapping(params = "method=listBoardTopic") public String listBoardTopic(int topicId,User user) {} } • 方法 @RequestMapping("/softpg/downSoftPg.do") @RequestMapping(value="/softpg/ajaxLoadSoftId.do",method = POST) @RequestMapping(value = "/osu/product/detail.do", params = { "modify=false" }, method =POST) • 說明 @RequestMapping 可以聲明到類或方法上 • 參數綁定說明 如果我們使用以下的 URL 請求: http://localhost/bbtForum.do?method=listBoardTopic&topicId=1&userId=10&userName=tom topicId URL 參數將綁定到 topicId 入參上,而 userId 和 userName URL 參數將綁定到 user 對象的 userId 和 userName 屬性中。和 URL 請求中不允許沒有 topicId 參數不同,雖然 User 的 userId 屬性的類型是基本數據類型,但如果 URL 中不存在 userId 參數,Spring 也不會報錯,此時 user.userId 值爲 0 。如果 User 對象擁有一個 dept.deptId 的級聯屬性,那麼它將和 dept.deptId URL 參數綁定。 @RequestParam • 參數綁定說明 @RequestParam("id") http://localhost/bbtForum.do?method=listBoardTopic&id=1&userId=10&userName=tom listBoardTopic(@RequestParam("id")int topicId,User user) 中的 topicId 綁定到 id 這個 URL 參數, 那麼可以通過對入參使用 @RequestParam 註解來達到目的 @RequestParam(required=false):參數不是必須的,默認爲true @RequestParam(value="id",required=false) 請求處理方法入參的可選類型 • Java 基本數據類型和 String 默認情況下將按名稱匹配的方式綁定到 URL 參數上,可以通過 @RequestParam 註解改變默認的綁定規則 • request/response/session 既可以是 Servlet API 的也可以是 Portlet API 對應的對象,Spring 會將它們綁定到Servlet 和 Portlet 容器的相應對象上 • org.springframework.web.context.request.WebRequest 內部包含了 request 對象 • java.util.Locale 綁定到 request 對應的 Locale 對象上 • java.io.InputStream/java.io.Reader 可以藉此訪問 request 的內容 • java.io.OutputStream / java.io.Writer 可以藉此操作 response 的內容 • 任何標註了 @RequestParam 註解的入參 被標註 @RequestParam 註解的入參將綁定到特定的 request 參數上。 • java.util.Map / org.springframework.ui.ModelMap 它綁定 Spring MVC 框架中每個請求所創建的潛在的模型對象,它們可以被 Web 視圖對象訪問(如 JSP ) • 命令/ 表單對象(注:一般稱綁定使用 HTTP GET 發送的 URL 參數的對象爲命令對象,而稱綁定使用HTTP POST 發送的 URL 參數的對象爲表單對象) 它們的屬性將以名稱匹配的規則綁定到 URL 參數上,同時完成類型的轉換。 而類型轉換的規則可以通過 @InitBinder 註解或通過 HandlerAdapter 的配置進行調 整 • org.springframework.validation.Errors / org.springframework.validation.BindingResult 爲屬性列表中的命令/ 表單對象的校驗結果,注意檢驗結果參數必須緊跟在命令/ 表單對象的後面 • org.springframework.web.bind.support.SessionStatus 可以通過該類型 status 對象顯式結束表單的處理,這相當於觸發 session 清除其中的通過@SessionAttributes 定義的屬性 請求處理方法返回值的可選類型 • void 此時邏輯視圖名由請求處理方法對應的 URL 確定,如以下的方法: @RequestMapping("/welcome.do") public void welcomeHandler() {} 對應的邏輯視圖名爲 “ welcome ” • String 此時邏輯視圖名爲返回的字符,如以下的方法: @RequestMapping(method = RequestMethod.GET) public String setupForm(@RequestParam("ownerId") int ownerId, ModelMap model) { Owner owner = this.clinic.loadOwner(ownerId); model.addAttribute(owner); return "ownerForm"; } 對應的邏輯視圖名爲 “ ownerForm ” • org.springframework.ui.ModelMap 和返回類型爲 void 一樣,邏輯視圖名取決於對應請求的 URL ,如下面的例子: @RequestMapping("/vets.do") public ModelMap vetsHandler() { return new ModelMap(this.clinic.getVets()); } 對應的邏輯視圖名爲 “ vets ” ,返回的 ModelMap 將被作爲請求對應的模型對象,可以在 JSP 視圖頁面中訪問到。 • ModelAndView 當然還可以是傳統的 ModelAndView 。 @ModelAttribute • 作用域:request • 例如 @RequestMapping("/base/userManageCooper/init.do") public String handleInit(@ModelAttribute("queryBean") ManagedUser sUser,Model model,){ • 或者 @ModelAttribute("coopMap")// 將coopMap 返回到頁 面 public Map<Long,CooperatorInfo> coopMapItems(){} • 說明 @ModelAttribute 聲明在屬性上,表示該屬性的value 來源於model 裏"queryBean" ,並被保存到model 裏@ModelAttribute 聲明在方法上,表示該方法的返回值被保存到model 裏 @Cacheable 和@CacheFlush • @Cacheable :聲明一個方法的返回值應該被緩 存 例如:@Cacheable(modelId = "testCaching") • @CacheFlush :聲明一個方法是清空緩存的觸發器 例如:@CacheFlush(modelId = "testCaching") • 說明 要配合緩存處理器使用,參考: http://hanqunfeng.iteye.com/blog/603719 @Resource • 例如 @Resource private DataSource dataSource; // inject the bean named 'dataSource' • 或者 @Resource(name="dataSource") @Resource(type=DataSource.class) • 說明 @Resource 默認按bean 的name 進行查找,如果沒有找到會按type 進行查找, 此時與@Autowired 類 似 在沒有爲 @Resource 註解顯式指定 name 屬性的前提下,如果將其標註在 BeanFactory 類型、ApplicationContext 類型、ResourceLoader 類型、ApplicationEventPublisher 類型、MessageSource 類型上,那麼 Spring 會自動注入這些實現類的實例,不需要額外的操作。此時 name 屬性不需要指定 ( 或者指定爲""),否則注入失敗; @PostConstruct 和@PreDestroy • @PostConstruct 在方法上加上註解@PostConstruct ,這個方法就會在Bean 初始化之後被Spring 容器執 行 (注:Bean 初始化包括,實例化Bean ,並裝配Bean 的屬性(依賴注入))。 • @PreDestroy 在方法上加上註解@PreDestroy ,這個方法就會在Bean 被銷燬前被Spring 容器執行。 @Repository • 與@Controller 、@Service 類似,都是向spring 上下文中註冊bean ,不在贅述。 @Component (不推薦使用) • @Component @Component 是所有受Spring 管理組件的通用形式,Spring 還提供了更加細化的註解形式: @Repository 、@Service 、@Controller ,它們分別對應存儲層Bean ,業務層Bean ,和展示層Bean 。 目前版本(2.5 )中,這些註解與@Component 的語義是一樣的,完全通用, 在Spring 以後的版本中可能會給它們追加更多的語義。 所以,我們推薦使用@Repository 、@Service 、@Controller 來替代@Component 。 @Scope • 例如 @Scope("session") @Repository() public class UserSessionBean implementsSerializable {} • 說明 在使用XML 定義Bean 時,可以通過bean 的scope 屬性來定義一個Bean 的作用範圍, 同樣可以通過@Scope 註解來完成 @Scope中可以指定如下值: singleton:定義bean的範圍爲每個spring容器一個實例(默認值) prototype:定義bean可以被多次實例化(使用一次就創建一次) request:定義bean的範圍是http請求(springMVC中有效) session:定義bean的範圍是http會話(springMVC中有效) global-session:定義bean的範圍是全局http會話(portlet中有效) @SessionAttributes • 說明 Spring 允許我們有選擇地指定 ModelMap 中的哪些屬性需要轉存到 session 中, 以便下一個請求屬對應的 ModelMap 的屬性列表中還能訪問到這些屬性。 這一功能是通過類定義處標註 @SessionAttributes 註解來實現的。 @SessionAttributes 只能聲明在類上,而不能聲明在方法上。 • 例如 @SessionAttributes("currUser") // 將ModelMap 中屬性名爲currUser 的屬性 @SessionAttributes({"attr1","attr2"}) @SessionAttributes(types = User.class) @SessionAttributes(types = {User.class,Dept.class}) @SessionAttributes(types = {User.class,Dept.class},value={"attr1","attr2"}) @InitBinder • 說明 如果希望某個屬性編輯器僅作用於特定的 Controller , 可以在 Controller 中定義一個標註 @InitBinder 註解的方法, 可以在該方法中向 Controller 了註冊若干個屬性編輯器 • 例如 @InitBinder public void initBinder(WebDataBinder binder) { SimpleDateFormat dateFormat = new SimpleDateFormat("yyyy-MM-dd"); dateFormat.setLenient(false); binder.registerCustomEditor(Date.class, new CustomDateEditor(dateFormat, false)); } @Required • 例如 @required public setName(String name){} • 說明 @ required 負責檢查一個bean在初始化時其聲明的 set方法是否被執行, 當某個被標註了 @Required 的 Setter 方法沒有被調用,則 Spring 在解析的時候會拋出異常,以提醒開發者對相應屬性進行設置。 @Required 註解只能標註在 Setter 方法之上。因爲依賴注入的本質是檢查 Setter 方法是否被調用了,而不是真的去檢查屬性是否賦值了以及賦了什麼樣的值。如果將該註解標註在非 setXxxx() 類型的方法則被忽略。 @Qualifier • 例如 @Autowired @Qualifier("softService") private ISoftPMService softPMService; • 說明 使用@Autowired 時,如果找到多個同一類型的bean,則會拋異常,此時可以使用 @Qualifier("beanName"),明確指定bean的名稱進行注入,此時與 @Resource指定name屬性作用相同。 求採納爲滿意回答。
SpringMVC 常用的註解和含義
發表評論
所有評論
還沒有人評論,想成為第一個評論的人麼? 請在上方評論欄輸入並且點擊發布.