六.if條件語句
語法格式:
if
條件1... :(冒號結尾) #如果不滿足,則執行下一條
if 條件n... :(冒號結尾) #如果不滿足,則執行下一條
elif 條件n... :(冒號結尾) #如果不滿足,則執行下一條
else 如果不滿足條件那麼就輸出...
elif
條件2... :(冒號結尾) #如果不滿足,則執行下一條
else :(冒號結尾)
如果不滿足條件那麼就輸出...
例子:if條件語句
gender = 'female' age = 21 height = 170 is_beautiful = True is_successful = False if gender == 'female' and age > 18 and age <= 25 and height > 160 and is_beautiful: print('表白中...') if is_successful: print('在一起...') else: print('逗你玩呢...') else: print('阿姨好...')
練習1:用戶登陸驗證
name=input('pls input you name>>:') passwd=input('pls input you passwd>>:') passwd=int(passwd) #輸入的數據設置爲整數類型 if name == 'szq' and passwd == 666666: print('Welcome') elif name != 'szq': print('You name not exit') elif name == 'szq' and passwd != 666666: print('You passwd is error') else: print('The name does not exist')
練習2:根據用戶輸入的內容給出其權限
name=input('pls input you name>>:') if name == 'szq': print('超級管理員') elif name == 'wjp': print('網管') elif name == 'zyl' or name == 'wxx': print('技術專員') else: print('不存在這個人')
練習3:判斷今天是周幾,然後決定是出去玩還是上班
today=input('pls input today>>:') today=int(today) if today in [1,2,3,4,5]: print('好好上班,別想着出去玩') elif today in [6,7]: print('出去玩') else: print(''' 必須輸入:1,2,3,4,5,6,7其中一種 ''')
注意點:if today in [1,2,3,4]: 就相當於變量today的值存在與[1,2,3,4]內。 #變量today匹配[]中括號內的任意一個值。
練習4:用戶登陸接口
讓用戶輸入用戶名密碼
認證成功後顯示歡迎信息
輸錯三次後退出程序
user_list={ 'ssp':{'passwd':666666,'account':0}, 'wsp':{'passwd':666666,'account':0}, 'zsp':{'passwd':666666,'account':0}, } while True: name=input('pls input you name >>:') passwd=input('pls input you passwd >>:') if name in user_list and passwd != user_list[name]['passwd']: print('用戶或密碼輸入錯誤,請重新輸入') user_list[name]['account'] += 1 #針對不同用戶做失敗次數判斷,這樣失敗次數不會疊加,某一用戶失敗,其他用戶不受影響 if user_list[name]['account'] > 2: #如果某一用戶失敗次數大於3,那麼就提示用戶"系統將被鎖定" print('你嘗試的輸入的次數過多,系統已被鎖定') break continue elif name in user_list and passwd == user_list[name]['passwd']: print('登陸成功') break else: print('用戶名不在') exit()
練習5:登陸接口需求升級:
可以支持多個用戶登錄 (提示,通過列表存多個賬戶信息)
用戶3次認證失敗後,退出程序,再次啓動程序嘗試登錄時,還是鎖定狀態(提示:需把用戶鎖定的狀態存到文件裏)
前言:這裏需要用到Python中文件的讀取和寫入功能,例:
user_list={ 'ssp':{'passwd':666666,'account':0}, 'wsp':{'passwd':666666,'account':0}, 'zsp':{'passwd':666666,'account':0}, } while True: name=input('pls input you name >>:') passwd=input('pls input you passwd >>:') passwd=int(passwd) with open('test.txt','r') as f: #打開文件"test.txt","r"表示只讀,默認使用 user_land=f.read() #f.read()表示讀取文件"test.txt"得內容並賦值給變量"user_land" if name in user_land: print('用戶 %s 嘗試登陸次數過多,已被系統鎖定,無法登陸!' % (name)) break if name in user_list and passwd != user_list[name]['passwd']: print('用戶或密碼輸入錯誤,請重新輸入') user_list[name]['account'] += 1 if user_list[name]['account'] > 2: print('你嘗試的輸入的次數過多,系統已被鎖定') with open('test.txt', 'w') as f: #"w"表示可寫,默認使用"r"只讀,可寫模式下不能讀文件內容 f.write(name) #要寫得內容 f.close() #有打開就有關閉 break continue elif name in user_list and passwd == user_list[name]['passwd']: print('登陸成功') break else: print('用戶名不在')#Python讀寫功能註釋:
Python讀寫功能註釋 with open('test.txt','w') as f: #打開文件"test.txt","w"表示可寫,默認使用"r"只讀,可寫模式下不能讀文件內容 f.write(name) #要寫得內容 f.write(passwd) #要寫得內容 f.close() #有打開就有關閉 with open('test.txt') as f: user_list=f.read() #f.read()"讀取文件test.txt得內容",把值賦值給變量user_list if name in user_list: print('用戶%s被鎖定' %(name))
七.循環 While與for循環
7.1while 循環
7.1.1 while循環的語法(又稱之爲條件循環)
while 條件:
代碼1
代碼2
代碼3
。。。。
7.1.2 while+break,break的意思是結束本層循環
7.1.2 while+continue,continue的意思是結束本次循環,進入下一次循環
while+continue練習:打印數字1-10,其中不打印數字8
n=1 while n <= 10: if n == 8: n+=1 #這裏不加n+=1的話,while循環執行到n=8時,會一直循環,那麼只能打印1-7,在8這個位置卡住 continue #當n=8時跳出本次循環 print(n) n+=1
練習1:循環嵌套 (while循環內再加while循環)
while True: #第1個while循環 print('第一層') while True: #第2個while循環 print('第二層') while True: #第3個while循環 cmd=input('第三層>>: ') if cmd == 'q': break #如果在第3個while循環內輸入'q',則跳出本層(第3層)循環 break break
練習2:循環嵌套小技巧 while+tag #適合用於循環嵌套(即while循環中套多個while循環,3個以上循環嵌套比較適合用)
tag=True #定義變量tag=True while tag: print('第一層') while tag: print('第二層') while tag: cmd=input('第三層>>: ') if cmd == 'q': #當輸入'q'命令時 tag = False #定義變量tag爲False,那麼本層循環結束後,所有的變量tag的值都爲False,那麼所有的循環都將結束 break
7.2 for循環 方便從一個數據裏面取多個值出來
name='szq' for n in name: #相當於:for n in 'szq' print(n) #運行後得到如下值 s z q
這裏可以看出,for循環內,對變量n依次賦值爲"szq"(依次賦值爲"s" "z" "q"),那麼在取變量n的值的時候,就能夠依次取出"s" "z" "q"多個值