BitmapFactory.Options詳解

轉自：http://blog.sina.com.cn/s/blog_7035ce0901017ljl.html

public Bitmap	inBitmap	If set, decode methods that take the Options object will attempt to reuse this bitmap when loading content.
public int	inDensity	The pixel density to use for the bitmap.
public boolean	inDither	If dither is true, the decoder will attempt to dither the decoded image.
public boolean	inInputShareable	This field works in conjuction with inPurgeable.
public boolean	inJustDecodeBounds	If set to true, the decoder will return null (no bitmap), but the out…
public boolean	inMutable	If set, decode methods will always return a mutable Bitmap instead of an immutable one.
public boolean	inPreferQualityOverSpeed	If inPreferQualityOverSpeed is set to true, the decoder will try to decode the reconstructed image to a higher quality even at the expense of the decoding speed.
publicBitmap.Config	inPreferredConfig	If this is non-null, the decoder will try to decode into this internal configuration.
public boolean	inPurgeable	If this is set to true, then the resulting bitmap will allocate its pixels such that they can be purged if the system needs to reclaim memory.
public int	inSampleSize	If set to a value > 1, requests the decoder to subsample the original image, returning a smaller image to save memory.
public boolean	inScaled	When this flag is set, if inDensity and inTargetDensity are not 0, the bitmap will be scaled to match inTargetDensity when loaded, rather than relying on the graphics system scaling it each time it is drawn to a Canvas.
public int	inScreenDensity	The pixel density of the actual screen that is being used.
public int	inTargetDensity	The pixel density of the destination this bitmap will be drawn to.
public byte[]	inTempStorage	Temp storage to use for decoding.
public boolean	mCancel	Flag to indicate that cancel has been called on this object.
public int	outHeight	The resulting height of the bitmap, set independent of the state of inJustDecodeBounds.
public String	outMimeType	If known, this string is set to the mimetype of the decoded image.
public int	outWidth	The resulting width of the bitmap, set independent of the state of inJustDecodeBounds.

這個表格是從android sdk文檔裏摘出來的，簡單看一下說明就明白是什麼意思了。
下面我們回到我們的主題上來：怎樣獲取圖片的大小？
思路很簡單：
首先我們把這個圖片轉成Bitmap，然後再利用Bitmap的getWidth()和getHeight()方法就可以取到圖片的寬高了。
新問題又來了，在通過BitmapFactory.decodeFile(String path)方法將突破轉成Bitmap時，遇到大一些的圖片，我們經常會遇到OOM(Out Of Memory)的問題。怎麼避免它呢？
這就用到了我們上面提到的BitmapFactory.Options這個類。

BitmapFactory.Options這個類，有一個字段叫做 inJustDecodeBounds 。SDK中對這個成員的說明是這樣的：
If set to true, the decoder will return null (no bitmap), but the out…
也就是說，如果我們把它設爲true，那麼BitmapFactory.decodeFile(String path, Options opt)並不會真的返回一個Bitmap給你，它僅僅會把它的寬，高取回來給你，這樣就不會佔用太多的內存，也就不會那麼頻繁的發生OOM了。
示例代碼如下：

1. BitmapFactory.Options options = new BitmapFactory.Options();
2. options.inJustDecodeBounds = true;
3. Bitmap bmp = BitmapFactory.decodeFile(path, options);

複製代碼

這段代碼之後，options.outWidth 和 options.outHeight就是我們想要的寬和高了。

有了寬，高的信息，我們怎樣在圖片不變形的情況下獲取到圖片指定大小的縮略圖呢？
比如我們需要在圖片不變形的前提下得到寬度爲200的縮略圖。
那麼我們需要先計算一下縮放之後，圖片的高度是多少 

1. int height = options.outHeight * 200 / options.outWidth;
2. options.outWidth = 200；
3. options.outHeight = height; 
4. options.inJustDecodeBounds = false;
5. Bitmap bmp = BitmapFactory.decodeFile(path, options);
6. image.setImageBitmap(bmp);

複製代碼

這樣雖然我們可以得到我們期望大小的ImageView
但是在執行BitmapFactory.decodeFile(path, options);時，並沒有節約內存。要想節約內存，還需要用到BitmapFactory.Options這個類裏的 inSampleSize 這個成員變量。
我們可以根據圖片實際的寬高和我們期望的寬高來計算得到這個值。

1. inSampleSize = options.outWidth / 200;

另外，爲了節約內存我們還可以使用下面的幾個字段：

1. options.inPreferredConfig = Bitmap.Config.ARGB_4444;    // 默認是Bitmap.Config.ARGB_8888
2. options.inPurgeable = true;
3. options.inInputShareable = true;