- 登錄到XenServer。
- 修改虛擬機磁盤大小
xe vdi-resize uuid=17e350e3-1528-4e8f-965b-d33d352e73ed disk-size=40GiB - 啓動虛擬機
- 修改分區大小
fdisk /dev/xvda
The number of cylinders for this disk is set to 5221.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help): p
Disk /dev/xvda: 42.9 GB, 42949672960 bytes
255 heads, 63 sectors/track, 5221 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/xvda1 * 1 13 104391 83 Linux
/dev/xvda2 14 2610 20860402+ 8e Linux LVM
Command (m for help): Command (m for help): p
DOS Compatibility flag is not set
Command (m for help): d
Partition number (1-4): 2
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 2
First cylinder (14-5221, default 14):
Using default value 14
Last cylinder or +size or +sizeM or +sizeK (14-5221, default 5221):
Using default value 5221
Command (m for help): t
Partition number (1-4): 2
Hex code (type L to list codes): 8e
Changed system type of partition 2 to 8e (Linux LVM)
Command (m for help): p
Disk /dev/xvda: 42.9 GB, 42949672960 bytes
255 heads, 63 sectors/track, 5221 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/xvda1 * 1 13 104391 83 Linux
/dev/xvda2 14 5221 41833260 8e Linux LVM
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table.
The new table will be used at the next reboot.
Syncing disks. - 重啓虛擬機:reboot
- 調整PV大小
pvs
PV VG Fmt Attr PSize PFree
/dev/xvda2 VolGroup00 lvm2 a- 19.88G 0
pvresize -v /dev/xvda2
Using physical volume(s) on command line
Archiving volume group "VolGroup00" metadata (seqno 3).
Resizing physical volume /dev/xvda2 from 636 to 1276 extents.
Resizing volume "/dev/xvda2" to 83666136 sectors.
Updating physical volume "/dev/xvda2"
Creating volume group backup "/etc/lvm/backup/VolGroup00" (seqno 4).
Physical volume "/dev/xvda2" changed
1 physical volume(s) resized / 0 physical volume(s) not resized
pvs
PV VG Fmt Attr PSize PFree
/dev/xvda2 VolGroup00 lvm2 a- 39.88G 20.00G - 調整LV大小
lvs
LV VG Attr LSize Origin Snap% Move Log Copy% Convert
LogVol00 VolGroup00 -wi-ao 17.84G
LogVol01 VolGroup00 -wi-ao 2.03G
lvextend -l +100%FREE /dev/VolGroup00/LogVol00
Extending logical volume LogVol00 to 37.84 GB
Logical volume LogVol00 successfully resized
lvs
LV VG Attr LSize Origin Snap% Move Log Copy% Convert
LogVol00 VolGroup00 -wi-ao 37.84G
LogVol01 VolGroup00 -wi-ao 2.03G - 調整分區大小
df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
5.7G 4.5G 950M 83% /
/dev/xvda1 99M 22M 73M 24% /boot
tmpfs 2.0G 0 2.0G 0% /dev/shm
resize2fs /dev/mapper/VolGroup00-LogVol00
resize2fs 1.39 (29-May-2006)
Filesystem at /dev/mapper/VolGroup00-LogVol00 is mounted on /; on-line resizing required
Performing an on-line resize of /dev/mapper/VolGroup00-LogVol00 to 9920512 (4k) blocks.
The filesystem on /dev/mapper/VolGroup00-LogVol00 is now 9920512 blocks long.
df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
37G 4.5G 31G 13% /
/dev/xvda1 99M 22M 73M 24% /boot
tmpfs 2.0G 0 2.0G 0% /dev/shm
任務完成
怎樣調整XenServer下面Linux虛擬機的磁盤大小
Xenserver6.0 ,Vsphere5.0的虛擬磁盤只能增加容量,不能減少!
發表評論
所有評論
還沒有人評論,想成為第一個評論的人麼? 請在上方評論欄輸入並且點擊發布.