CocoaAsyncSocket 网络通信使用之http协议测试(三)
通过前一篇CocoaAsyncSocket网络通信使用之数据编码和解码(二),我们已经搭建好了socket的框架。
框架主要分为以下5个模块:
1-网络连接模块(socket connection)
2-数据协议框架(socket packet content protocol)
3-发送数据前的编码模块(socket encoder protocol)
4-接收数据后的解码模块(socket decoder protocol)
5-各模块的组合调用(socket service)
简述:
通过5个模块的协同工作,可以方便的处理tcp通信的扩展。
因为不方便公开外网服务,不能很好的测试自定义协议的编码器/解码器,
只是简单的对网络连接成功做了打印,现在我们来实践下框架的扩展用法。
http(HyperText Transport Protocol,超文本传输协议)
其实现在网上随处可见http协议的服务,而http是基于tcp/ip的,我们正好可以借用http来实践我们的用法。
现在就针对http协议来实现我们的编码器/解码器。
http协议内容很多,本文主要是测试sokcet框架,确认框架的完整性,拓展性,具体协议内容请自行搜索(http协议格式)。
以下是实现编码器/解码器时,学习的网址:(强烈建议学习一下,否则不好理解http编码器/解码器的内容哦)
http://blog.csdn.net/gueter/article/details/1524447
http协议的测试[编码器/解码器]
代码中只是测试用例,并非真实完整实现,看官勿喷。
RHPacketHttpRequest.h文件:(http协议的测试请求包)
#import "RHPacketBody.h"
@interface RHPacketHttpRequest : RHPacketBody
@property (nonatomic, copy) NSString *requestPath;
@property (nonatomic, copy) NSString *host;
@property (nonatomic, copy) NSString *connection;
@end
RHPacketHttpRequest.m文件:(只是测试,默认写了几个请求参数)
#import "RHPacketHttpRequest.h"
@implementation RHPacketHttpRequest
- (instancetype)init
{
if (self = [super init]) {
_requestPath = @"GET /index.html HTTP/1.1";
_host = @"Host:www.baidu.com";
_connection = @"Connection:close";
}
return self;
}
- (NSData *)data
{
NSData *crlfData = [@"\r\n" dataUsingEncoding:NSASCIIStringEncoding];<span style="font-family: Arial, Helvetica, sans-serif;">//回车换行是http协议中每个字段的分隔符</span>
NSMutableData *packetData = [[NSMutableData alloc] init];
[packetData appendData:[_requestPath dataUsingEncoding:NSASCIIStringEncoding]];
[packetData appendData:crlfData];
[packetData appendData:[_host dataUsingEncoding:NSASCIIStringEncoding]];
[packetData appendData:crlfData];
[packetData appendData:[_connection dataUsingEncoding:NSASCIIStringEncoding]];
[packetData appendData:crlfData];
// [packetData appendData:[@"Accept:image/webp,*/*;q=0.8" dataUsingEncoding:NSASCIIStringEncoding]];
// [packetData appendData:crlfData];
return packetData;
}
@end
RHSocketHttpEncoder.h文件:(http协议的测试编码器)
#import <Foundation/Foundation.h>
#import "RHSocketEncoderProtocol.h"
@interface RHSocketHttpEncoder : NSObject <RHSocketEncoderProtocol>
@end
RHSocketHttpEncoder.m文件:
#import "RHSocketHttpEncoder.h"
#import "RHSocketConfig.h"
@implementation RHSocketHttpEncoder
- (void)encodePacket:(id<RHSocketPacketContent>)packet encoderOutput:(id<RHSocketEncoderOutputDelegate>)output
{
NSData *data = [packet data];
NSMutableData *sendData = [NSMutableData dataWithData:data];
NSData *crlfData = [@"\r\n" dataUsingEncoding:NSASCIIStringEncoding];//回车换行是http协议中每个字段的分隔符,也是请求的结束符
[sendData appendData:crlfData];
NSTimeInterval timeout = [packet timeout];
NSInteger tag = [packet tag];
RHSocketLog(@"tag:%ld, timeout: %f, data: %@", (long)tag, timeout, sendData);
[output didEncode:sendData timeout:timeout tag:tag];
}
@end
RHSocketHttpDecoder.h文件:(http协议的测试解码器)
#import <Foundation/Foundation.h>
#import "RHSocketDecoderProtocol.h"
@interface RHSocketHttpDecoder : NSObject <RHSocketDecoderProtocol>
@end
RHSocketHttpDecoder.m文件:
#import "RHSocketHttpDecoder.h"
#import "RHSocketConfig.h"
#import "RHPacketHttpResponse.h"
@interface RHSocketHttpDecoder ()
{
NSMutableData *_receiveData;
}
@end
@implementation RHSocketHttpDecoder
- (NSUInteger)decodeData:(NSData *)data decoderOutput:(id<RHSocketDecoderOutputDelegate>)output tag:(long)tag
{
@synchronized(self) {
if (_receiveData) {
[_receiveData appendData:data];
} else {
_receiveData = [NSMutableData dataWithData:data];
}
NSUInteger dataLen = _receiveData.length;
NSInteger headIndex = 0;
int crlfCount = 0;
for (NSInteger i=0; i<dataLen; i++) {
uint8_t byte;
[_receiveData getBytes:&byte range:NSMakeRange(i, 1)];
if (byte == 0x0a) {//0x0a是http协议中的字段分隔符,我们只是测试程序,简单解析对应返回数据,然后打印
crlfCount++;
}
if (crlfCount == 2) {
NSInteger packetLen = i - headIndex;
NSData *packetData = [_receiveData subdataWithRange:NSMakeRange(headIndex, packetLen)];
RHPacketHttpResponse *rsp = [[RHPacketHttpResponse alloc] initWithData:packetData];
[output didDecode:rsp tag:0];
headIndex = i + 1;
crlfCount = 0;
}
}
NSData *remainData = [_receiveData subdataWithRange:NSMakeRange(headIndex, dataLen-headIndex)];
[_receiveData setData:remainData];
return _receiveData.length;
}//@synchronized
}
@end
测试调用方法:
NSString *host = @"www.baidu.com";
int port = 80;
[RHSocketService sharedInstance].encoder = [[RHSocketHttpEncoder alloc] init];
[RHSocketService sharedInstance].decoder = [[RHSocketHttpDecoder alloc] init];
[[RHSocketService sharedInstance] startServiceWithHost:host port:port];
也可以继承RHSocketService对象,重载里面的接口方法,增加短线重连等等逻辑。
总结:
以上就是针对http协议实现的测试代码,我们可以看到,socket框架中的代码无需修改,完全可以共用。
这样以后即使是不同应用,不同的业务协议,也不需要重复造轮子了。
文章中都是以代码的方式呈现的,习惯看代码的同学可能比较易懂,但是缺乏整体框架的说明描述。
下一篇,针对当前的框架,绘制uml类图结构。
---------------------转载请注明出处,谢谢
email: [email protected]
qq: 410289616