Linux下添加路由的方法:
一:使用 route 命令添加
使用route 命令添加的路由,機器重啓或者網卡重啓後路由就失效了,方法:
//添加到主機的路由
# route add –host 192.168.168.110 dev eth0
# route add –host 192.168.168.119 gw 192.168.168.1
//添加到網絡的路由
# route add –net IP netmask MASK eth0
# route add –net IP netmask MASK gw IP
# route add –net IP/24 eth1
//添加默認網關
# route add default gw IP
//刪除路由
# route del –host 192.168.168.110 dev eth0
二:在linux下設置永久路由的方法:
1.在/etc/rc.local裏添加
方法:
route add -net 192.168.3.0/24 dev eth0
route add -net 192.168.2.0/24 gw 192.168.3.254
2.在/etc/sysconfig/network裏添加到末尾
方法:GATEWAY=gw-ip 或者 GATEWAY=gw-dev
修改過的文件
/etc/rc.d/rc.local 文件
#!/bin/sh
#
# This script will be executed *after* all the other init scripts.
# You can put your own initialization stuff in here if you don't
# want to do the full Sys V style init stuff.
touch /var/lock/subsys/local
route add -net 172.16.0.0 netmask 255.255.0.0 gw 192.168.1.100 dev eth0
最後一行是自己添加的路由
說明:
route add:命令關鍵字,表示增加路由
-net:表示路由目標網段
netmask:表示路由目標爲網段時纔會使用到,表示路由目標網段的子網掩碼
gw:命令關鍵字,後面跟下一條網關
dev:命令關鍵字,後面跟具體設備名,表示路由是從該設備出去的
改完以後是需要重啓的 重啓命令是shutdown -r now
使用route -n命令查看是否添加上路由條目