第一步 下載pppoe客戶端
第二步 安裝pppoe客戶端
拆包解壓到 /usr/local/src目錄
[root@CentOS ~]# tar -zxvf rp-pppoe-3.11.tar.gz -C /usr/local/src
進入/usr/local/src目錄
[root@CentOS ~]# cd /usr/local/src
進入rp_pppoe-3.11目錄
[root@CentOS src]# cd rp-pppoe-3.11/
查看README文件裏面有安裝步驟
[root@CentOS rp-pppoe-3.11]# vim README
Compile and install pppd if you don't already have it. Then:
1) Unpack:
$ tar xzvf rp-pppoe-xxx.tar.gz
2) Change to source directory:
$ cd src
3) Configure:
$ ./configure
4) Compile:
$ make
4) Install (this step must be done as root)
# make install
5) Now read doc/HOW-TO-CONNECT
--
David F. Skoll <[email protected]> | Roaring Penguin Software Inc.
http://www.roaringpenguin.com
進入rp-pppoe目錄下的src目錄
[root@CentOS rp-pppoe-3.11]# cd src
編譯
[root@CentOS src]# ./configure
執行make
[root@CentOS src]# make
安裝pppoe
[root@CentOS src]# make install
設置pppoe
[root@CentOS src]# pppoe-setup
提示設置用戶名默認[email protected]
注意這裏說的用戶是你的登錄賬號
[root@CentOS rp-pppoe-3.11]# pppoe-setup
Welcome to the Roaring Penguin PPPoE client setup. First, I will run
some checks on your system to make sure the PPPoE client is installed
properly...
Looks good! Now, please enter some information:
USER NAME
>>> Enter your PPPoE user name (default 15638892360):
輸入用戶名回車
提示選擇網卡默認eth0
INTERFACE
>>> Enter the Ethernet interface connected to the DSL modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethn, where 'n' is a number.
(default eth0):
選擇按需連接還是永久在線默認永久在線
Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped. If you want the link to
stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses. You may have some problems with demand-activated links.
>>> Enter the demand value (default no):
提示讓你輸入你的IPS（Internet服務提供商）的主DNS 服務器地址
DNS
Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide DNS addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
>>> Enter the DNS information here:
輸入密碼和確認密碼
PASSWORD
>>> Please enter your PPPoE password:
>>> Please re-enter your PPPoE password:
配置防火牆，這裏有三個級別
FIREWALLING
Please choose the firewall rules to use. Note that these rules are
very basic. You are strongly encouraged to use a more sophisticated
firewall setup; however, these will provide basic security. If you
are running any servers on your machine, you must choose 'NONE' and
set up firewalling yourself. Otherwise, the firewall rules will deny
access to all standard servers like Web, e-mail, ftp, etc. If you
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.
The firewall choices are:
0 - NONE: This script will not set any firewall rules. You are responsible
for ensuring the security of your machine. You are STRONGLY
recommended to use some kind of firewall rules.
1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
for a LAN
>>> Choose a type of firewall (0-2):
配置完成後會顯示的的配置，並詢問是否保存
** Summary of what you entered **
Ethernet Interface: eth0
User name:
Activate-on-demand: No
DNS: Do not adjust
Firewalling: NONE
>>> Accept these settings and adjust configuration files (y/n)?
保存後會提示配置的保存位置，並提示下一步操作
Adjusting /etc/ppp/pppoe.conf
Adjusting /etc/ppp/pap-secrets and /etc/ppp/chap-secrets
(But first backing it up to /etc/ppp/pap-secrets-bak)
(But first backing it up to /etc/ppp/chap-secrets-bak)
Congratulations, it should be all set up!
Type 'pppoe-start' to bring up your PPPoE link and 'pppoe-stop' to bring
it down. Type 'pppoe-status' to see the link status.
啓動pppoe
[root@CentOS src]# pppoe-start
登錄成功會提示
[root@CentOS rp-pppoe-3.11]# pppoe-start
pppoe-start: There already seems to be a PPPoE connection up (PID 37234)
到此pppoe登錄成功