rsync常見報錯及解決方法

由於我們經常使用rsync進行服務器文件的同步工作,但在配置過程中,會出現很多問題,下面的錯誤基本上都是通過客戶端返回的錯誤進行分析我們都是通過錯誤日誌查看在rsyncd.log裏面或.err文件裏面,大家可以用記事本打開查看。注意windows下面我們需要給SvcwRsync用戶,管理同步目錄的所有權限,基本上這樣就可以了

問題一: 

@ERROR: chroot failed 

rsync error: error starting client-server protocol (code 5) at main.c(1522) [receiver=3.0.3] 

原因: 服務器端的目錄不存在或無權限,創建目錄並修正權限可解決問題。 


問題二: 

@ERROR: auth failed on module tee 

rsync error: error starting client-server protocol (code 5) at main.c(1522) [receiver=3.0.3] 

原因: 服務器端該模塊(tee)需要驗證用戶名密碼,但客戶端沒有提供正確的用戶名密碼,認證失敗。 提供正確的用戶名密碼解決此問題。 


問題三: 

@ERROR: Unknown module ‘tee_nonexists' 

rsync error: error starting client-server protocol (code 5) at main.c(1522) [receiver=3.0.3] 

原因: 服務器不存在指定模塊。提供正確的模塊名或在服務器端修改成你要的模塊以解決問題。 


問題1: 

在client上遇到問題: 

rsync -auzv --progress --password-file=/etc/rsync.pas [email protected]::backup /home/ 

rsync: could not open password file "/etc/rsync.pas": No such file or directory (2) 

Password: @ERROR: auth failed on module backup rsync error: error starting client-server protocol (code 5) at main.c(1506) [Receiver=3.0.7] 

遇到這個問題:client端沒有設置/etc/rsync.pas這個文件,而在使用rsync命令的時候,加了這個參數--password-file=/etc/rsync.pas 


問題2: 

rsync -auzv --progress --password-file=/etc/rsync.pas [email protected]::backup /home/ 

@ERROR: auth failed on module backup rsync error: error starting client-server protocol (code 5) at main.c(1506) [Receiver=3.0.7] 

遇到這個問題:client端已經設置/etc/rsync.pas這個文件,裏面也設置了密碼111111,和服務器一致,但是服務器段設置有錯誤,服務器端應該設置/etc/rsync.pas ,裏面內容root:111111 ,這裏登陸名不可缺少 


問題3: 

rsync -auzv --progress --password-file=/etc/rsync.pas [email protected]::backup /home/ 

@ERROR: chdir failed rsync error: error starting client-server protocol (code 5) at main.c(1506) [Receiver=3.0.7] 

遇到這個問題,是因爲服務器端的/home/backup 其中backup這個目錄並沒有設置,所以提示:chdir failed 


問題4: 

rsync: write failed on "/home/backup2010/wensong": No space left on device (28) 

rsync error: error in file IO (code 11) at receiver.c(302) [receiver=3.0.7] 

rsync: connection unexpectedly closed (2721 bytes received so far) [generator] 

rsync error: error in rsync protocol data stream (code 12) at io.c(601) [generator=3.0.7] 

磁盤空間不夠,所以無法操作。 

可以通過df /home/backup2010 來查看可用空間和已用空間 


問題5:網絡收集問題 

1、權限問題 類似如下的提示:rsync: opendir "/kexue" (in dtsChannel) failed: Permission denied (13)注意查看同步的目錄權限是否爲755 

2、time out 

rsync: failed to connect to 203.100.192.66: Connection timed out (110) 

rsync error: error in socket IO (code 10) at clientserver.c(124) [receiver=3.0.5] 

檢查服務器的端口netstat –tunlp,遠程telnet測試。 可能因爲客戶端或者服務端的防火牆開啓 導致無法通信,可以設置規則放行 rsync(873端口) 或者直接關閉防火牆。 還有一種在同步過程中可能會提示沒有權限 (將同步目錄加上SvcwRsync全部權限即可,更簡單的方法就是將SvcwRsync設爲管理員即可)

3、服務未啓動 

rsync: failed to connect to 10.10.10.170: Connection refused (111) 

rsync error: error in socket IO (code 10) at clientserver.c(124) [receiver=3.0.5] 

啓動服務:rsync --daemon --config=/etc/rsyncd.conf 

4、磁盤空間滿 

rsync: recv_generator: mkdir "/teacherclubBackup/rsync……" failed: No space left on device (28) *** Skipping any contents from this failed directory *** 

5、Ctrl+C或者大量文件 

rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at rsync.c(544) [receiver=3.0.5] 

rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at rsync.c(544) [generator=3.0.5] 

6、xnetid啓動 

rsync: read error: Connection reset by peer (104) 

rsync error: error in rsync protocol data stream (code 12) at io.c(759) [receiver=3.0.5] 

查看rsync日誌 rsync: unable to open configuration file "/etc/rsyncd.conf": No such file or directory 

xnetid查找的配置文件位置默認是/etc下,根據具體情況創建軟鏈接。例如: ln -s /etc/rsyncd/rsyncd.conf /etc/rsyncd.conf 或者更改指定默認的配置文件路徑,在/etc/xinetd.d/rsync配置文件中。 


發表評論
所有評論
還沒有人評論,想成為第一個評論的人麼? 請在上方評論欄輸入並且點擊發布.
相關文章