在一些情況下，軟件的參數配置文件很長，爲了方便管理，將配置文件切割成N個配置文件，但爲了主配置參數文件的簡潔，便會啓用INCLUDE參數，以方便程序讀取指定目錄下的所有配置文件
# This is a configuration file for Zabbix Server process
# To get more information about Zabbix,
# visit http://www.zabbix.com
############ GENERAL PARAMETERS #################
### Option: NodeID
# Unique NodeID in distributed setup.
# 0 – standalone server
#
# Mandatory: no
# Range: 0-999
# Default:
#說明：服務端節點Id，0表示只有一臺服務端；主要用於服務端分佈式部署時，視使用者設計ZABBIX系統架構調整
# NodeID=0
### Option: ListenPort
# Listen port for trapper.
#
# Mandatory: no
# Range: 1024-32767
# Default:
#說明:服務端監聽端口用於接收二級代理或直連AGENT的採集數據
# ListenPort=10051
### Option: SourceIP
# Source IP address for outgoing connections.
#
# Mandatory: no
# Default:
#說明：服務端監聽IP，建議指定
# SourceIP=
### Option: LogFile
# Name of log file.
# If not set, syslog is used.
#
# Mandatory: no
# Default:
# LogFile=
#說明：zabbix服務端日誌路徑，視具體情況指定
LogFile=/smp/sncmon/zabbix_server.log
### Option: LogFileSize
# Maximum size of log file in MB.
# 0 – disable automatic log rotation.
#
# Mandatory: no
# Range: 0-1024
# Default:
#說明：日誌達到多少M裏就輪轉；若此參數值爲0時，則不輪轉，日誌將不斷變大，建議設置成輪轉
# LogFileSize=1
### Option: DebugLevel
# Specifies debug level
# 0 – no debug 無日誌
# 1 – critical information 災難日誌，日誌量較少
# 2 – error information 錯誤級別，日誌量大於CRITICAL級別
# 3 – warnings 告警級別，日誌量大於ERROR級別
# 4 – for debugging (produces lots of information)調試級別，日誌量大於WARNING
#
# Mandatory: no
# Range: 0-4
# Default:
#說明：日誌級別0~4，單位時間內生成日誌的量不斷增大
# DebugLevel=3
### Option: PidFile
# Name of PID file.
#
# Mandatory: no
# Default:
#說明：zabbix服務端程序PID路徑
# PidFile=/tmp/zabbix_server.pid
### Option: DBHost
# Database host name.
# If set to localhost, socket is used for MySQL.
# If set to empty string, socket is used for PostgreSQL.
#
# Mandatory: no
# Default:
#說明：指定數據庫信息，對於mysql，若設置爲localhost則mysql用SOCKET來連接(需配合參數 DBSocket 使用)，否則用IP連接；若DHHOST值爲空，則默認連接PostgreSQL
# DBHost=localhost
### Option: DBName
# Database name.
# For SQLite3 path to database file must be provided. DBUser and DBPassword are ignored.
#
# Mandatory: yes
# Default:
# DBName=
#說明：服務端連接數據庫的庫名
DBName=smp
### Option: DBSchema
# Schema name. Used for IBM DB2.
#
# Mandatory: no
# Default:
#說明：專門用於 IBM DB2數據庫的連接信息
# DBSchema=
### Option: DBUser
# Database user. Ignored for SQLite.
#
# Mandatory: no
# Default:
#說明：連接數據庫的用戶
# DBUser=
DBUser=root
### Option: DBPassword
# Database password. Ignored for SQLite.
# Comment this line if no password is used.
#
# Mandatory: no
# Default:
#說明：連接數據庫的密碼
DBPassword=123
### Option: DBSocket
# Path to MySQL socket.
#
# Mandatory: no
# Default:
#說明：指定MYSQL的SOCK連接路徑
# DBSocket=/tmp/mysql.sock
### Option: DBPort
# Database port when not using local socket. Ignored for SQLite.
#
# Mandatory: no
# Range: 1024-65535
# Default (for MySQL):
#說明：指定連接數據庫的端口
DBPort=3306
############ ADVANCED PARAMETERS ################
#高級參數
### Option: StartPollers
# Number of pre-forked instances of pollers.
#
# Mandatory: no
# Range: 0-1000
# Default:
#說明;初始化時，啓動子進程數量，數量越多，則服務端吞吐能力越強，對系統資源消耗越大
# StartPollers=5
### Option: StartIPMIPollers
# Number of pre-forked instances of IPMI pollers.
#
# Mandatory: no
# Range: 0-1000
# Default:
#
#說明:主要用於IPmi技術用於獲取硬件狀態場景。若無相關監控項，建議設置爲0
# StartIPMIPollers=0
### Option: StartPollersUnreachable
# Number of pre-forked instances of pollers for unreachable hosts (including IPMI).
#
# Mandatory: no
# Range: 0-1000
# Default:
#說明：默認情況下，ZABBIX會啓用指定進程用於探測某些不可達主機的（含IPMI場景）；若使用場景中含有代理端，建議保持默認；若直接agent較多，可視具體情況調整
# StartPollersUnreachable=1
### Option: StartTrappers
# Number of pre-forked instances of trappers.
# Trappers accept incoming connections from Zabbix sender, active agents, active proxies and child nodes.
# At least one trapper process must be running to display server availability in the frontend.
#
# Mandatory: no
# Range: 0-1000
# Default:
說明：用於設置諸如SNMP STRAPPER場景提交來的數據的接收進程數，若客戶機SNMP TRAPPER技術較多，建議加大此參數值
# StartTrappers=5
### Option: StartPingers
# Number of pre-forked instances of ICMP pingers.
#
# Mandatory: no
# Range: 0-1000
# Default:
#說明：用於設置啓用icmp協議PING主機方式啓動線程數量，若單臺代理所管理機器超過500臺，建議加大此數值
# StartPingers=1
### Option: StartDiscoverers
# Number of pre-forked instances of discoverers.
#
# Mandatory: no
# Range: 0-250
# Default:
說明：用於設置自動發現主機的線程數量，若單臺代理所管理機器超過500臺，可以考慮加大此數值（僅適用於直接AGENT場景）
# StartDiscoverers=1
### Option: StartHTTPPollers
# Number of pre-forked instances of HTTP pollers.
#
# Mandatory: no
# Range: 0-1000
# Default:
#說明：用於設置WEB撥測監控線程數，可視具體情況增加或減少此數值。
# StartHTTPPollers=1
### Option: StartTimers
# Number of pre-forked instances of timers.
# Timers process time-based trigger functions and maintenance periods.
# Only the first timer process handles the maintenance periods.
#
# Mandatory: no
# Range: 1-1000
# Default:
#說明：各實例計時器數量，主要用於觸發器，標有維護標識的主機，但只第一個計時器用於計算維護標識主機。
# StartTimers=1
### Option: JavaGateway
# IP address (or hostname) of Zabbix Java gateway.
# Only required if Java pollers are started.
#
# Mandatory: no
# Default:
#說明：JAVAGATEWAY 場景下使用
# JavaGateway=
### Option: JavaGatewayPort
# Port that Zabbix Java gateway listens on.
#
# Mandatory: no
# Range: 1024-32767
# Default:
#說明：JAVAGATEWAY 場景下使用
# JavaGatewayPort=10052
### Option: StartJavaPollers
# Number of pre-forked instances of Java pollers.
#
# Mandatory: no
# Range: 0-1000
# Default:
#說明：JAVAGATEWAY 場景下使用
# StartJavaPollers=0
### Option: StartVMwareCollectors
# Number of pre-forked vmware collector instances.
#
# Mandatory: no
# Range: 0-250
# Default:
#說明：用於設置監控VMWARE Esxi主機實例時使用，若爲0則不啓用，若要監控ESXI主機，此值最少爲1 ；視監控ESXI數量設置對應數值
# StartVMwareCollectors=0
### Option: VMwareFrequency
# How often Zabbix will connect to VMware service to obtain a new data.
#
# Mandatory: no
# Range: 10-86400
# Default:
#說明：代理端訪問 VMWARE service的頻率，單位:秒
# VMwareFrequency=60
### Option: VMwareCacheSize
# Size of VMware cache, in bytes.
# Shared memory size for storing VMware data.
# Only used if VMware collectors are started.
#
# Mandatory: no
# Range: 256K-2G
# Default:
#說明：劃出多少共享內存用於存儲VMWARE數據
# VMwareCacheSize=8M
### Option: SNMPTrapperFile
# Temporary file used for passing data from SNMP trap daemon to the server.
# Must be the same as in zabbix_trap_receiver.pl or SNMPTT configuration file.
#
# Mandatory: no
# Default:
#說明：指定SNMP TRAPPER 時的臨時文件，用於代理端啓用SNMP TRAPPER功能時使用
# SNMPTrapperFile=/tmp/zabbix_traps.tmp
### Option: StartSNMPTrapper
# If 1, SNMP trapper process is started.
#
# Mandatory: no
# Range: 0-1
# Default:
#說明：是否啓用 snmptrapper功能 ，默認不啓用=0，啓用=1（配合參數SNMPTrapperFile使用）
# StartSNMPTrapper=0
### Option: ListenIP
# List of comma delimited IP addresses that the trapper should listen on.
# Trapper will listen on all network interfaces if this parameter is missing.
#
# Mandatory: no
# Default:
說明：啓用SNMPTRAPPER裏 ，接收端監聽的IP，此參數與StartSNMPTrapper，SNMPTrapperFile 聯合使用
# ListenIP=0.0.0.0
# ListenIP=127.0.0.1
### Option: HousekeepingFrequency
# How often Zabbix will perform housekeeping procedure (in hours).
# Housekeeping is removing unnecessary information from history, alert, and alarms tables.
#
# Mandatory: no
# Range: 1-24
# Default:
#說明：多少小時清理一次代理端數據庫的 history, alert, and alarms，以保持代理端數據庫輕便，建議保持默認
# HousekeepingFrequency=1
### Option: MaxHousekeeperDelete
# The table “housekeeper” contains “tasks” for housekeeping procedure in the format:
# [housekeeperid], [tablename], [field], [value].
# No more than ‘MaxHousekeeperDelete’ rows (corresponding to [tablename], [field], [value])
# will be deleted per one task in one housekeeping cycle.
# SQLite3 does not use this parameter, deletes all corresponding rows without a limit.
# If set to 0 then no limit is used at all. In this case you must know what you are doing!
#
# Mandatory: no
# Range: 0-1000000
# Default:
# MaxHousekeeperDelete=500
### Option: SenderFrequency
# How often Zabbix will try to send unsent alerts (in seconds).
#
# Mandatory: no
# Range: 5-3600
# Default:
#說明:多少秒後重試發送失敗的報警信息
# SenderFrequency=30
### Option: CacheSize
# Size of configuration cache, in bytes.
# Shared memory size for storing host, item and trigger data.
#
# Mandatory: no
# Range: 128K-2G
# Default:
#說明;zabbix初始化時佔用多少系統共享內存用於存儲配置信息，HOST,ITEM,TRIGGER數據，視監控主機數量和監控項調整，建議調整到32M或者更大
# CacheSize=8M
### Option: CacheUpdateFrequency
# How often Zabbix will perform update of configuration cache, in seconds.
#
# Mandatory: no
# Range: 1-3600
# Default:
#說明：zabbix更新操作系統CACHE頻率，若管理頁面操作不頻繁，可以考慮加大參數值
# CacheUpdateFrequency=60
### Option: StartDBSyncers
# Number of pre-forked instances of DB Syncers
#
# Mandatory: no
# Range: 1-100
# Default:
#說明:將採集數據從CACHE同步到數據庫線程數量，視數據庫服務器I/O繁忙情況，和數據庫寫能力調整。數值越大，寫能力越強。對數據庫服務器I/O壓力越大。
# StartDBSyncers=4
### Option: HistoryCacheSize
# Size of history cache, in bytes.
# Shared memory size for storing history data.
#
# Mandatory: no
# Range: 128K-2G
# Default:
#說明：用於設置劃分多少系統共享內存用於存儲採集的歷史數據，此數值越大，數據庫讀壓力越小
# HistoryCacheSize=8M
### Option: TrendCacheSize
# Size of trend cache, in bytes.
# Shared memory size for storing trends data.
#
# Mandatory: no
# Range: 128K-2G
# Default:
#說明：用於設置劃分多少系統共享內存用於存儲計算出來的趨勢數據，此參數值從一定程度上可影響數據庫讀壓力
# TrendCacheSize=4M
### Option: HistoryTextCacheSize
# Size of text history cache, in bytes.
# Shared memory size for storing character, text or log history data.
#
# Mandatory: no
# Range: 128K-2G
# Default:
#說明:指定劃出多少系統共享內存用於存儲 character, text or log history數據，若二級代理內存足夠，建議可適當擴大此數值，可很大程度上解決系統I/O壓力，和數據庫讀壓力
# HistoryTextCacheSize=16M
### Option: ValueCacheSize
# Size of history value cache, in bytes.
# Shared memory size for caching item history data requests
# Setting to 0 disables value cache.
#
# Mandatory: no
# Range: 0,128K-64G
# Default:
#說明：劃出系統多少共享內存用於已請求的存儲監控項信息，若監控項較多，建議加大此數值
# ValueCacheSize=8M
### Option: NodeNoEvents
# If set to ‘1’ local events won’t be sent to master node.
# This won’t impact ability of this node to propagate events from its child nodes.
#
# Mandatory: no
# Range: 0-1
# Default:
#說明：若節點爲子結點，是否允許本地事件（events表）發送到主節點，1爲不發送，但不影響此節點以下的節點的傳播能力，視ZABBIX分佈式系統架構設計開啓或關閉。在不明架構前提下，建議保持默認
# NodeNoEvents=0
### Option: NodeNoHistory
# If set to ‘1’ local history won’t be sent to master node.
# This won’t impact ability of this node to propagate history from its child nodes.
#
# Mandatory: no
# Range: 0-1
# Default:
說明：若節點爲子結點，是否允許本地歷史數據發送到主節點，1爲不發送，但不影響此節點以下的節點的傳播能力，視ZABBIX分佈式系統架構設計開啓或關閉，在不明架構前提下，建議保持默認
# NodeNoHistory=0
### Option: Timeout
# Specifies how long we wait for agent, SNMP device or external check (in seconds).
#
# Mandatory: no
# Range: 1-30
# Default:
#說明：與AGNETSNMP設備和其它外部設備通信超時設置，單位爲秒；若採集數據不完整或網絡繁忙，或從管理頁面發現客戶端狀態變化頻繁，可以考慮加大此數值。注意若此數值加大，應該考慮參數 StartPollers 是否有相應加大的必要。
# Timeout=3
### Option: TrapperTimeout
# Specifies how many seconds trapper may spend processing new data.
#
# Mandatory: no
# Range: 1-300
# Default:
#說明：啓用 trapper功能，用於進程等待超時設置。根據需要調整
# TrapperTimeout=300
### Option: UnreachablePeriod
# After how many seconds of unreachability treat a host as unavailable.
#
# Mandatory: no
# Range: 1-3600
# Default:
#說明：當AGNET端處於不可用狀態下，間隔多少秒後，嘗試重新連接。建議根據具體情況設置。注意，若此數值過小，右agent端業務系統繁忙時，有可能造成報警信息誤報
# UnreachablePeriod=45
### Option: UnavailableDelay
# How often host is checked for availability during the unavailability period, in seconds.
#
# Mandatory: no
# Range: 1-3600
# Default:
#說明:當AGENT端處於可用狀態下，間隔多少秒後，進行狀態檢查。若出現可正常採集數據，但管理頁面AGENT狀態不正常；若在網絡，端口等均通暢情況下，AGENT狀態仍不正常，可以考慮加大此數值
# UnavailableDelay=60
### Option: UnreachableDelay
# How often host is checked for availability during the unreachability period, in seconds.
#
# Mandatory: no
# Range: 1-3600
# Default:
#說明：當agent端處於不可達狀態下，延遲多少秒後，進行重新嘗試，建議保持默認，在AGENT接入調試階段，可考慮減少此數值
# UnreachableDelay=15
### Option: AlertScriptsPath
# Full path to location of custom alert scripts.
# Default depends on compilation options.
#
# Mandatory: no
# Default:
#說明：監控報警腳本路徑，非研發人員不建議修改此參數值
# AlertScriptsPath=${datadir}/zabbix/alertscripts
### Option: ExternalScripts
# Full path to location of external scripts.
# Default depends on compilation options.
#
# Mandatory: no
# Default:
#說明：自定義腳本存儲路徑，非研發人員不建議修改此參數值
# ExternalScripts=${datadir}/zabbix/externalscripts
### Option: FpingLocation
# Location of fping.
# Make sure that fping binary has root ownership and SUID flag set.
#
# Mandatory: no
# Default:
#說明：IPv4 FPING命令路徑，僅ROOT可用。注意使用此命令時，應該確認此命令是否存在
# FpingLocation=/usr/sbin/fping
### Option: Fping6Location
# Location of fping6.
# Make sure that fping6 binary has root ownership and SUID flag set.
# Make empty if your fping utility is capable to process IPv6 addresses.
#
# Mandatory: no
# Default:
#說明：IPv6 FPING命令路徑，僅ROOT可用。注意使用此命令時，應該確認此命令是否存在
# Fping6Location=/usr/sbin/fping6
### Option: SSHKeyLocation
# Location of public and private keys for SSH checks and actions.
#
# Mandatory: no
# Default:
#說明：在服務端需要SSH到AGENT端且採用用KEY驗證方式時使用。非研發人員，不建議修改或設置
# SSHKeyLocation=
### Option: LogSlowQueries
# How long a database query may take before being logged (in milliseconds).
# Only works if DebugLevel set to 3 or 4.
# 0 – don’t log slow queries.
#
# Mandatory: no
# Range: 1-3600000
# Default:
#說明:用於服務端數據庫慢查詢功能，單位是毫秒；1毫秒=0.001秒，若有服務端數據庫監控慢查詢的需求，可以視具體情況調整此數。
# LogSlowQueries=0
### Option: TmpDir
# Temporary directory.
#
# Mandatory: no
# Default:
#說明：zabbix服務端工作的臨時目錄
# TmpDir=/tmp
### Option: StartProxyPollers
# Number of pre-forked instances of pollers for passive proxies.
#
# Mandatory: no
# Range: 0-250
# Default:
#說明:啓用多少子進程與代理端通信，若代理端較多可考慮加大此數值
# StartProxyPollers=1
### Option: ProxyConfigFrequency
# How often Zabbix Server sends configuration data to a Zabbix Proxy in seconds.
# This parameter is used only for proxies in the passive mode.
#
# Mandatory: no
# Range: 1-3600*24*7
# Default:
#說明：zabbix服務端將配置文件數據同步到代理端的頻率，僅適用於代理端爲被動模式情況 下
# ProxyConfigFrequency=3600
### Option: ProxyDataFrequency
# How often Zabbix Server requests history data from a Zabbix Proxy in seconds.
# This parameter is used only for proxies in the passive mode.
#
# Mandatory: no
# Range: 1-3600
# Default:
說明：zabbix服務端請求代理端採集的數據的頻率，僅適用代理端爲被動模式情況下
# ProxyDataFrequency=1
### Option: AllowRoot
# Allow the server to run as ‘root’. If disabled and the server is started by ‘root’, the server
# will try to switch to user ‘zabbix’ instead. Has no effect if started under a regular user.
# 0 – do not allow 不允許
# 1 – allow 允許
#
# Mandatory: no
# Default:
#說明：是否允許以root身份運行服務端
# AllowRoot=0
### Option: Include
# You may include individual files or all files in a directory in the configuration file.
# InstallingZabbix will create include directory in /usr/local/etc, unless modified during the compile time.
#
# Mandatory: no
# Default:
#說明：在一些情況下，軟件的參數配置文件很長，爲了方便管理，將配置文件切割成N個配置文件，但爲了主配置參數文件的簡潔，便會啓用INCLUDE參數，以方便程序讀取指定目錄下的所有配置文件
# Include=
# Include=/usr/local/etc/zabbix_server.general.conf
# Include=/usr/local/etc/zabbix_server.conf.d/
####### LOADABLE MODULES #######
### Option: LoadModulePath
# Full path to location of server modules.
# Default depends on compilation options.
#
# Mandatory: no
# Default:
#指定本地模塊路徑，非研發人員不建議修改
# LoadModulePath=${libdir}/modules
### Option: LoadModule
# Module to load at server startup. Modules are used to extend functionality of the server.
# Format: LoadModule=
# The modules must be located in directory specified by LoadModulePath.
# It is allowed to include multiple LoadModule parameters.
#
# Mandatory: no
# Default:
#指定本地模塊路徑，非研發人員不建議修改
# LoadModule=.so>