查看设备
* adb devices
这个命令是查看当前连接的设备, 连接到计算机的android设备或者模拟器将会列出显示
安装软件
* adb install
这个命令将指定的apk文件安装到设备上.
卸载软件
* adb uninstall <软件名>
* adb uninstall -k <软件名>
如果加 -k 参数,为卸载软件但是保留配置和缓存文件.
登录设备shell
* adb shell
* adb shell
这个命令将登录设备的shell.
后面加将是直接运行设备命令, 相当于执行远程命令
从电脑上发送文件到设备
* adb push <本地路径> <远程路径>
用push命令可以把本机电脑上的文件或者文件夹复制到设备(手机)
从设备上下载文件到电脑
* adb pull <远程路径> <本地路径>
用pull命令可以把设备(手机)上的文件或者文件夹复制到本机电脑
显示帮助信息
* adb help
这个命令将显示帮助信息
这里还有一个英文版的：
在DOS下输入以下命令基本可以完成刷机任务,一些常用命令解释如下:
adb devices - 列出连接到电脑的ADB设备(也就是手机),一般显示出手机P/N码.如果没有显示出来则手机与电脑没有连接上.
adb install – 安装手机软件到手机中,如:adb install qq2009.apk.
adb remount – 重新打开手机写模式(刷机模式).
adb push - 传送文件到手机中,如:adb push recovery.img /sdcard/recovery.img,将本地目录中的recovery.img文件传送手机的SD卡中并取同样的文件名.
adb pull - 传送手机的文件到本地目录(和上命令相反).
adb shell - 让手机执行命令,就是手机执行的命令.如: adb shell flash_image recovery /sd-card/recovery-RAv1.0G.img,执行将recovery-RAv1.0G.img写入到recovery 区中.
我们刷recovery时一般按下顺序执行:
adb shell mount -a
adb push recovery-RAv1.0G.img /system/recovery.img
adb push recovery-RAv1.0G.img /sdcard/recovery-RAv1.0G.img
adb shell flash_image recovery /sdcard/recovery-RAv1.0G.img reboot
其它的自己灵活运用了.
ADB命令详解:
Android Debug Bridge version 1.0.20
-d - directs command to the only connected USB device returns an error if more than one USB device is present.
-e - directs command to the only running emulator.returns an error if more than one emulator is running.
-s – directs command to the USB device or emulator withthe given serial number
-p – simple product name like ‘sooner’, or a relative/absolute path to a product out directory like ‘out/target/product/sooner’.
If -p is not specified, the ANDROID_PRODUCT_OUT environment variable is used, which must be an absolute path.
devices – list all connected devices
device commands:
adb push – copy file/dir to device
adb pull – copy file/dir from device
adb sync [ ] – copy host->device only if changed (see ‘adb help all’)
adb shell – run remote shell interactively
adb shell – run remote shell command
adb emu – run emulator console command
adb logcat [ ] – View device log
adb forward – forward socket connections
forward specs are one of:
tcp:
localabstract:
localreserved:
localfilesystem:
dev:
jdwp: (remote only)
adb jdwp – list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] – push this package file to the device and install it
(‘-l’ means forward-lock the app)
(‘-r’ means reinstall the app, keeping its data)
adb uninstall [-k] – remove this app package from the device
(‘-k’ means keep the data and cache directories)
adb bugreport – return all information from the device that should be included in a bug report.
adb help – show this help message
adb version – show version num
DATAOPTS:
(no option) – don’t touch the data partition
-w – wipe the data partition
-d – flash the data partition
scripting:
adb wait-for-device – block until device is online
adb start-server – ensure that there is a server running
adb kill-server – kill the server if it is running
adb get-state – prints: offline | bootloader | device
adb get-serialno – prints:
adb status-window – continuously print device status for a specified device
adb remount – remounts the /system partition on the device re
ad-write
adb root – restarts adb with root permissions
networking:
adb ppp [parameters] – Run PPP over USB.
Note: you should not automatically start a PDP connection.
refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] – Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ ]
can be interpreted in several ways:
- If is not specified, both /system and /data partitions will be updated.
- If it is “system” or “data”, only the corresponding partition is updated