一：安裝Nginx
1,添加一個不能登錄且沒有主目錄的用戶：
1 # useradd www -M -s /sbin/nologin(www可以用nginx,說明是nginx用戶)
2,必要的組件
# wget ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-8.13.zip
# unzip pcre-8.13.zip
# cd pcre-8.13
# ./configure
# make && make install
（如果有錯誤提示：
./configure: error: the HTTP rewrite module requires the PCRE library.
請按照下面的安裝方法：
安裝pcre-devel與openssl-devel解決問題
yum -y install pcre-devel openssl openssl-devel）
MGB，安裝出現一個問題 make: *** No rule to make target `build', needed by `default'. Stop.，莫名的奇妙；
安裝make：
yum -y install gcc automake autoconf libtool make
安裝g++:
yum install gcc gcc-c++
yum -y install openssl openssl-devel
3,編譯nginx並安裝
# tar -zxvf nginx-1.3.9.tar.gz
# cd nginx-1.3.9
# ./configure --prefix=/opt/nginx --user=www --group=www --with-http_stub_status_module --with-http_ssl_module --with-pcre=/usr/local/src/pcre-8.34
# make && make install
--with-pcre 後面的路徑 爲源碼包解壓後的路徑，而不是安裝路徑，否則會報錯！
[2].安裝PHP
1,安裝必要的組件
# yum -y install libjpeg-devel libpng-devel
# wget ftp://mcrypt.hellug.gr/pub/crypto/mcrypt/libmcrypt/libmcrypt-2.5.8.tar.gz（下載，這個路徑不一定正確，可以通過其他方法下載）
# tar -zxvf libmcrypt-2.5.8.tar.gz
# cd libmcrypt-2.5.8
# ./configure
# make && make install
==64位系統==
1 # ln -s /usr/lib64/mysql/ /usr/lib/mysql
==64位系統==
二：編譯php並安裝
# cd php-5.4.9
# ./configure --prefix=/opt/php --with-iconv --with-zlib --enable-xml --disable-rpath --enable-safe-mode --enable-bcmath --enable-shmop --enable-sysvsem --enable-inline-optimization --with-curl --with-curlwrappers --enable-mbregex --enable-mbstring --with-mcrypt ='對於libmcrypt的安裝目錄' --with-gd --enable-gd-native-ttf --with-openssl --with-mhash --enable-pcntl --enable-sockets --with-xmlrpc --enable-zip --enable-soap --without-pear --with-mysql --with-mysqli --enable-sqlite-utf8 --with-pdo-mysql --enable-ftp --with-jpeg-dir --with-freetype-dir --with-png-dir --enable-fpm --with-fpm-user=www --with-fpm-group=www
# make && make install
相關錯誤解決：
checking for cURL in default path... not found
configure: error: Please reinstall the libcurl distribution -
easy.h should be in /include/curl/
其實就是curl的dev包沒有安裝, 解決方案:
終端下
# yum -y install curl-devel
然後就可以繼續了
在CentOS編譯PHP5的時候有時會遇到以下的一些錯誤信息，基本上都可以通過yum安裝相應的庫來解決。以下是具體的一些解決辦法：
checking for BZip2 support… yes checking for BZip2 in default path… not found configure: error: Please reinstall the BZip2 distribution
Fix: yum install bzip2-devel
checking for cURL support… yes checking if we should use cURL for url streams… no checking for cURL in default path… not found configure: error: Please reinstall the libcurl distribution – easy.h should be in/include/curl/
Fix: yum install curl-devel
checking for curl_multi_strerror in -lcurl… yes checking for QDBM support… no checking for GDBM support… no checking for NDBM support… no configure: error: DBA: Could not find necessary header file(s).
Fix: yum install db4-devel
checking for fabsf… yes checking for floorf… yes configure: error: jpeglib.h not found.
Fix: yum install libjpeg-devel
checking for fabsf… yes checking for floorf… yes checking for jpeg_read_header in -ljpeg… yes configure: error: png.h not found.
Fix: yum install libpng-devel
checking for png_write_image in -lpng… yes If configure fails try –with-xpm-dir=
Fix: Reconfigure your PHP with the following option. --with-xpm-dir=/usr
checking for png_write_image in -lpng… yes configure: error: libXpm.(a|so) not found.
Fix: yum install libXpm-devel
checking for bind_textdomain_codeset in -lc… yes checking for GNU MP support… yes configure: error: Unable to locate gmp.h
Fix: yum install gmp-devel
checking for utf8_mime2text signature… new checking for U8T_DECOMPOSE… configure: error: utf8_mime2text() has new signature, but U8T_CANONICAL is missing. This should not happen. Check config.log for additional information.
Fix: yum install libc-client-devel
checking for LDAP support… yes, shared checking for LDAP Cyrus SASL support… yes configure: error: Cannot find ldap.h
Fix: yum install openldap-devel
checking for mysql_set_character_set in -lmysqlclient… yes checking for mysql_stmt_next_result in -lmysqlclient… no checking for Oracle Database OCI8 support… no checking for unixODBC support… configure: error: ODBC header file ‘/usr/include/sqlext.h’ not found!
Fix:
yum install unixODBC-devel
checking for PostgreSQL support for PDO… yes, shared checking for pg_config… not found configure: error: Cannot find libpq-fe.h. Please specify correct PostgreSQL installation path
Fix: yum install postgresql-devel
checking for sqlite 3 support for PDO… yes, shared checking for PDO includes… (cached) /usr/local/src/php-5.3.7/ext checking for sqlite3 files in default path… not found configure: error: Please reinstall the sqlite3 distribution
Fix: yum install sqlite-devel
checking for utsname.domainname… yes checking for PSPELL support… yes configure: error: Cannot find pspell
Fix: yum install aspell-devel
checking whether to enable UCD SNMP hack… yes checking for default_store.h… no
checking for kstat_read in -lkstat… no checking for snmp_parse_oid in -lsnmp… no checking for init_snmp in -lsnmp… no configure: error: SNMP sanity check failed. Please check config.log for more information.
Fix: yum install net-snmp-devel
checking whether to enable XMLWriter support… yes, shared checking for xml2-config path… (cached) /usr/bin/xml2-config checking whether libxml build works… (cached) yes checking for XSL support… yes, shared configure: error: xslt-config not found. Please reinstall the libxslt >= 1.1.0 distribution
Fix: yum install libxslt-devel
configure: error: xml2-config not found. Please check your libxml2 installation.
Fix: yum install libxml2-devel
checking for PCRE headers location… configure: error: Could not find pcre.h in /usr
Fix: yum install pcre-devel
configure: error: Cannot find MySQL header files under yes. Note that the MySQL client library is not bundled anymore!
Fix: yum install mysql-devel
checking for unixODBC support… configure: error: ODBC header file ‘/usr/include/sqlext.h’ not found!
Fix: yum install unixODBC-devel
checking for pg_config… not found configure: error: Cannot find libpq-fe.h. Please specify correct PostgreSQL installation path
Fix:
yum install postgresql-devel
configure: error: Cannot find pspell
Fix: yum install pspell-devel
configure: error: Could not find net-snmp-config binary. Please check your net-snmp installation.
Fix: yum install net-snmp-devel
configure: error: xslt-config not found. Please reinstall the libxslt >= 1.1.0 distribution
Fix: yum install libxslt-devel
3,拷貝和修改php配置文件
# cp php.ini-production /opt/php/lib/php.ini 或是/usr/local/lib/php.ini
# cp /opt/php/etc/php-fpm.conf.default /opt/php/etc/php-fpm.conf
# /opt/php/bin/php --ini //測試ini文件是否加載
修改php.ini
[PHP]
safe_mode = On
register_globals = Off
magic_quotes_gpc = Off
allow_url_fopen = Off
allow_url_include = Off
expose_php=Off
disable_functions = shell_exec,system,exec,passthru,show_source,curl_exec,curl_multi_exec,get_cfg_var
[Date]
date.timezone = “Asia/Shanghai”
修改php-fpm.conf
[global]
pid = run/php-fpm.pid
error_log = log/php-fpm.log
log_level = notice
emergency_restart_threshold = 0
emergency_restart_interval = 0
[www]
pm.start_servers = 20
pm.min_spare_servers = 5
pm.max_spare_servers = 35(不能大於max_children)
pm.max_requests = 500
4,添加服務啓動腳本
# cp nginx /etc/init.d/nginx
# cp php-fpm /etc/init.d/php-fpm
# chmod 755 /etc/init.d/nginx
# chmod 755 /etc/init.d/php-fpm
# chkconfig --add nginx
# chkconfig --add php-fpm
# chkconfig nginx on
# chkconfig php-fpm on
三：安裝Mysql
3.1, 創建mysql安裝目錄
1 # mkdir -p /opt/mysql/
3.2, 創建數據存放目錄
1 # mkdir -p /data/mysql/
3.3, 創建用戶和用戶組與賦予數據存放目錄權限
# useradd mysql -M -s /sbin/nologin
# chown mysql.mysql -R /data/mysql/
3.4, 安裝必要的組件
# yum -y install cmake
# yum -y install ncurses-devel
3.5, 編譯安裝Mysql
tar -zxvf mysql-5.5.28.tar.gz
cd mysql-5.5.28
cmake . -DCMAKE_INSTALL_PREFIX=/opt/mysql -DMYSQL_UNIX_ADDR=/data/mysql/mysql.sock -DDEFAULT_CHARSET=utf8 -DDEFAULT_COLLATION=utf8_general_ci -DWITH_EXTRA_CHARSETS:STRING=utf8,gbk -DWITH_MYISAM_STORAGE_ENGINE=1 -DWITH_INNOBASE_STORAGE_ENGINE=1 -DWITH_MEMORY_STORAGE_ENGINE=1 -DWITH_READLINE=1 -DENABLED_LOCAL_INFILE=1 -DMYSQL_DATADIR=/data/mysql -DMYSQL_USER=mysql -DMYSQL_TCP_PORT=3306
# make && make install
安裝完mysql服務器運行正常,但無法使用gbk字符集,系統裝了中文支持,mysql重裝了幾次都不行.
show character set裏沒有gbk;
set names gbk 就提示錯誤 #1115 - Unknown character set: 'gbk'
------------
解決方案：
上面的編譯參數-DWITH_EXTRA_CHARSETS:STRING=utf8,gbk
這個參數引起的問題
方法一、去掉這個參數,默認值是支持all的charset
方法二、直接改爲-DWITH_EXTRA_CHARSETS=all
加入-DDEFAULT_COLLATION=utf8_general_ci選項後，啓動mysql可能會有問題，須在my.cnf 文件 [mysqld]加入
character_set_server=utf8
3.6, 初始化數據庫
# cd /opt/mysql
# scripts/mysql_install_db --user=mysql --basedir=/opt/mysql --datadir=/data/mysql/
3.7, 配置環境
# cp support-files/my-medium.cnf /etc/my.cnf（這裏的my.cnf參考服務器的內存大小 一般my-medium.cnf是256M，my-large.cnf是512M）
# cp support-files/mysql.server /etc/init.d/mysql
# chmod 755 /etc/init.d/mysql
# chkconfig mysql on
# export PATH=/opt/mysql/bin:$PATH //設置環境變量
3.8, 啓動並設置初始密碼
# /etc/init.d/mysql start
# mysqladmin -uroot password '123123'
進行再修改密碼的語句
1: UPDATE mysql.user SET Password = PASSWORD(‘newpwd’) WHERE User = ‘root’;(生新設置密碼)
2: flush privileges;（刷新權限）
注：mysql日誌文件保存在/data/mysql/下面，對應數據文件保存的路徑（比如.err)。
四：安裝memcached
1.下載libevent和memcached
http://memcached.googlecode.com/files/memcached-1.4.13.tar.gz
https://github.com/downloads/libevent/libevent/libevent-2.0.18-stable.tar.gz
2.安裝libevent
tar -zxvf libevent-2.0.18-stable.tar.gz
cd libevent-2.0.18-stable
./configure --prefix=/usr/local/libevent
make && make install
cd ../
3.安裝memcached
tar -zxvf memcached-1.4.13.tar.gz
cd memcached-1.4.13
./configure --prefix=/usr/local/memcached --with-libevent=/usr/local/libevent/
make && make install
cd ..
4:安裝Memcache的PHP擴展
(1).在http://pecl.php.net/package/memcache 選擇相應想要下載的memcache版本。
(2).安裝PHP的memcache擴展
tar vxzf memcache-2.2.6.tar.gz
cd memcache-2.2.6
/usr/local/php/bin/phpize
./configure –enable-memcache –with-php-config=/usr/local/php/bin/php-config –with-zlib-dir
make
make install
(3).上述安裝完後會有類似這樣的提示：
Installing shared extensions: /usr/local/php/lib/php/extensions/no-debug-non-zts-20100525/
(4).把php.ini中的extension_dir = “./”修改爲
extension_dir = “/usr/local/php/lib/php/extensions/no-debug-non-zts-20100525/”
(5).添加一行來載入memcache擴展：extension=memcache.so
5.啓動並加入啓動項
/usr/local/memcached/bin/memcached -d -l 192.168.1.2 -u www -m 512 -c 10240 -p 12000 -P /tmp/memcached.pid
將以上加入到/etc/rc.local方便下次自動啓動
*注：用戶-u必須指定,在此處示例所用的是WEB用戶www
6.使用telnet查看狀態
telnet 192.168.1.2 12000
stats #查看運行狀態
quit #退出
附註：
php5.4.9啓動命令：/opt/php/sbin/php-fpm
檢測php運行進程 ps aux|grep php-fpm
php-fpm 關閉：
kill -INT `cat /usr/local/php/var/run/php-fpm.pid`
關閉後，需要 /opt/php/sbin/php-fpm啓動；沒有php-fpm.pid就用touch創建。
php-fpm 重啓：
kill -USR2 `cat /usr/local/php/var/run/php-fpm.pid`
Nginx 服務啓動命令：/opt/nginx/sbin/nginx
語法檢測 /opt/nginx/sbin/nginx -t 檢測nginx.conf文件語法；
php啓動報錯：
ERROR: [pool www] cannot get uid for user 'fpm'
需要在php-fpm上改動user=fpm
group=fpm
fpm改成nginx；（安裝nginx的用戶）