Ensp模擬器VLAN 技術
一:實驗要求:
能使相同的VLAN之間正常通訊
二:所需設備:
使用Ensp模擬兩個S3700交換機,四臺PC機
三:技術解釋:
使用VLAN技術,屏蔽廣播風暴
四:實驗拓撲:
五:實驗步驟:
1.開啓所有設備
2.給LSW1更改主機名爲sw1 ,LSW2更改爲sw2
<Huawei>SYS
[Huawei]sysname sw1
[sw1]
<Huawei>SYS
[Huawei]sysname sw2
[sw2]
3.給LSW1添加VLAN10 和 VLAN 20
<sw1>SYS //用戶模式
[sw1]VLAN 10 //在特權模式下新建VLAN10
[sw1-vlan10] //進入VLAN10
[sw1-vlan10]VLAN 20 //新建VLAN20
[sw1-vlan20] //進入VLAN20
4.給 LSW2添加 VLAN10和VLAN20
[sw2]vlan 10
[sw2-vlan10]
[sw2-vlan10]VLAN 20
[sw2-vlan20]
5.在LSW1中將PC1加入VLAN 10 PC2加入VLAN 20
[sw1-vlan20]int e0/0/2
[sw1-Ethernet0/0/2]port link-type access
[sw1-Ethernet0/0/2]port default vlan 10
[sw1-Ethernet0/0/2]int e0/0/3
[sw1-Ethernet0/0/3]port link-type access
[sw1-Ethernet0/0/3]port default vlan 20
[sw1-Ethernet0/0/3]
查看VLAN10 VLAN20
[sw1-Ethernet0/0/3]dis vlan
反饋信息的一部分:
-----------------------------------------------------------------1 common UT:Eth0/0/1(U) Eth0/0/4(D) Eth0/0/5(D) 10 common UT:Eth0/0/2(U)
20 common UT:Eth0/0/3(U)
6.在LSW2中將PC3加入VLAN 10 PC4加入VLAN 20
[sw2]int e0/0/2
[sw2-Ethernet0/0/2]port link-type access
[sw2-Ethernet0/0/2]port default vlan 10
[sw2-Ethernet0/0/2]int e0/0/3
[sw2-Ethernet0/0/3]port link-type access
[sw2-Ethernet0/0/3]port default vlan 20
[sw2-Ethernet0/0/3]
7.在SW1與SW2之間都配置中繼口
[sw1-Ethernet0/0/3]int e0/0/1
[sw1-Ethernet0/0/1]port link-type trunk
[sw1-Ethernet0/0/1]port trunk allow-pass vlan all
[sw2-Ethernet0/0/3]int e0/0/1
[sw2-Ethernet0/0/1]port link-type trunk
[sw2-Ethernet0/0/1]port trunk allow-pass vlan all
8.驗證:能使PC1 ping PC3 ,PC1不能 ping通 PC2
PC>ping 192.168.10.20
Ping 192.168.10.20: 32 data bytes, Press Ctrl_C to break
From 192.168.10.20: bytes=32 seq=1 ttl=128 time=94 ms
From 192.168.10.20: bytes=32 seq=2 ttl=128 time=62 ms
From 192.168.10.20: bytes=32 seq=3 ttl=128 time=31 ms
From 192.168.10.20: bytes=32 seq=4 ttl=128 time=47 ms
From 192.168.10.20: bytes=32 seq=5 ttl=128 time=46 ms
--- 192.168.10.20 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 31/56/94 ms
PC>ping 192.168.20.10
Ping 192.168.20.10: 32 data bytes, Press Ctrl_C to break
From 192.168.10.10: Destination host unreachable
From 192.168.10.10: Destination host unreachable
From 192.168.10.10: Destination host unreachable
From 192.168.10.10: Destination host unreachable
From 192.168.10.10: Destination host unreachable
實驗完成
魏康平
2013年10月19日 16:25:53