H3C MSR路由器 PPPOE+NAT+策略路由+QOS 配置實例

[H3C]display current-configuration
#
 version 5.20, Release 1719, Basic
#
 sysname H3C
#
 undo cryptoengine enable
#
 firewall enable
#
 domain default enable system
#
 telnet server enable
#
 qos carl 1 destination-ip-address range 192.168.3.2 to 192.168.3.254 per-addres
s
 qos carl 2 source-ip-address range 192.168.3.2 to 192.168.3.254 per-address
 qos carl 3 destination-ip-address range 192.168.2.1 to 192.168.2.254 per-addres
s
 qos carl 10 source-ip-address subnet 192.168.3.0 24 per-address
 qos carl 20 destination-ip-address subnet 192.168.3.0 24 per-address
#
acl number 2000
 rule 0 permit source 192.168.3.0 0.0.0.255
acl number 2222
 rule 0 permit source 192.168.3.0 0.0.0.255
 rule 5 permit source 192.168.2.0 0.0.0.255
#
acl number 3001
 rule 0 permit ip source 192.168.3.1 0.0.0.254
acl number 3002
 rule 0 permit ip source 10.0.1.1 0.0.0.254
acl number 3111
 rule 0 permit ip source 192.168.3.0 0.0.0.254
acl number 3112
 rule 0 permit ip source 192.168.3.1 0.0.0.254
acl number 3113
 rule 0 permit ip destination 192.168.2.0 0.0.0.255
acl number 3114
 rule 5 permit ip source 192.168.3.180 0.0.0.3
acl number 3333
#
vlan 1
#
connection-limit policy 1
#
domain system
 access-limit disable
 state active
 idle-cut disable
 self-service-url disable
#
user-group system
#
local-user huawei
 password cipher N`C55QK<`=/Q=^Q`MAF4<1!!
 authorization-attribute level 3
 service-type telnet
#
interface Aux0
 async mode flow
 link-protocol ppp
#
interface Dialer1
 nat outbound 2000
 link-protocol ppp
 ppp pap local-user **************
 ip address ppp-negotiate
 load-bandwidth 2000
 tcp mss 1024
 dialer user ****************
 dialer-group 1
 dialer bundle 1
#
interface Dialer2
 nat outbound 2000
 link-protocol ppp
 ppp pap local-user ****************
 ip address ppp-negotiate
 load-bandwidth 2000
 tcp mss 1024
 dialer user **************
 dialer-group 1
 dialer bundle 2
#
interface Dialer3
 nat outbound 2000
 link-protocol ppp
 ppp pap local-user ****************
 ip address ppp-negotiate
 load-bandwidth 2000
 tcp mss 1024
 dialer user *************
 dialer-group 1
 dialer bundle 3
#
interface Ethernet0/0
 port link-mode route
 pppoe-client dial-bundle-number 3
#
interface Ethernet0/1
 port link-mode route
 pppoe-client dial-bundle-number 2
#
interface Ethernet1/0
 port link-mode route
 pppoe-client dial-bundle-number 1
#
interface NULL0
#
interface LoopBack10
 ip address 192.168.2.253 255.255.255.255
#
interface Vlan-interface1
 ip address 192.168.3.1 255.255.255.0
 ip address 192.168.2.254 255.255.255.0 sub
 qos car inbound carl 10 cir 1000 cbs 1000 ebs 1000 green pass red discard
 qos car outbound carl 20 cir 1000 cbs 1000 ebs 1000 green pass red pass
 ip policy-based-route fz1
#
interface Ethernet0/2
 port link-mode bridge
#
interface Ethernet0/3
 port link-mode bridge
#
interface Ethernet0/4
 port link-mode bridge
#
interface Ethernet0/5
 port link-mode bridge
#
interface Ethernet0/6
 port link-mode bridge
#
interface Ethernet0/7
 port link-mode bridge
#
interface Ethernet0/8
 port link-mode bridge
#
interface Ethernet0/9
 port link-mode bridge
#
policy-based-route fz1 permit node 0
   if-match acl 3113
   apply output-interface Vlan-interface1
policy-based-route fz1 permit node 1
   if-match acl 3114
   apply output-interface Dialer3
policy-based-route fz1 permit node 2
   if-match acl 3112
   apply output-interface Dialer2
policy-based-route fz1 permit node 3
   if-match acl 3111
   apply output-interface Dialer1
#
policy-based-route fz2 permit node 0
   if-match acl 3111
   apply output-interface Dialer1
policy-based-route fz2 permit node 1
   if-match acl 3112
   apply output-interface Dialer2
#
 ip route-static 0.0.0.0 0.0.0.0 Dialer3
#
 nat connection-limit-policy 1
#
 telnet client source ip 192.168.2.254
#
 dialer-rule 1 ip permit
 dialer-rule 2 ip permit
 dialer-rule 3 ip permit
#
user-interface con 0
user-interface aux 0
user-interface vty 0 4
 acl 2222 inbound
 authentication-mode scheme
 user privilege level 3
 set authentication password simple huawei
#
return