生產環境有個服務器空間滿了，需要擴容爲了保證操作流暢提前預演了一下，雖然相關的文章很多了，還是記錄一下。
# cat /proc/scsi/scsi #查看當前通道；
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: VMware, Model: VMware Virtual S Rev: 1.0
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: NECVMWar Model: VMware IDE CDR10 Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 05
# echo "scsi add-single-device 0 0 1 0" > /proc/scsi/scsi #添加硬盤；
# cat /proc/scsi/scsi #查看上面的添加是否生效；
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: VMware, Model: VMware Virtual S Rev: 1.0
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: NECVMWar Model: VMware IDE CDR10 Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 05
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: VMware, Model: VMware Virtual S Rev: 1.0
Type: Direct-Access ANSI SCSI revision: 02
# fdisk -l #檢查確認看到了添加的sdb磁盤，接下來分區格式化、掛載即可；
Disk /dev/sda: 21.5 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000a0593
Device Boot Start End Blocks Id System
/dev/sda1 * 1 66 524288 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 66 1371 10485760 83 Linux
/dev/sda3 1371 1893 4194304 83 Linux
/dev/sda4 1893 2611 5766144 5 Extended
/dev/sda5 1894 2155 2097152 82 Linux swap / Solaris
/dev/sda6 2155 2611 3666944 83 Linux
Disk /dev/sdb: 5368 MB, 5368709120 bytes
255 heads, 63 sectors/track, 652 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0000000