centos7純手動安裝kubernetes-v1.11版本

簡介

本文章主要介紹如何通過使用官方提供的二進制包安裝配置k8s集羣

實驗環境說明

實驗架構

lab1: master 11.11.11.111
lab2: node 11.11.11.112
lab3: node 11.11.11.113
複製代碼

實驗使用的Vagrantfile

# -*- mode: ruby -*- # vi: set ft=ruby :

ENV["LC_ALL"] = "en_US.UTF-8"

Vagrant.configure("2") do |config|
 (1..3).each do |i|
 config.vm.define "lab#{i}" do |node|
 node.vm.box = "centos-7.4-docker-17"
 node.ssh.insert_key = false
 node.vm.hostname = "lab#{i}"
 node.vm.network "private_network", ip: "11.11.11.11#{i}"
 node.vm.provision "shell",
 inline: "echo hello from node #{i}"
 node.vm.provider "virtualbox" do |v|
 v.cpus = 2
 v.customize ["modifyvm", :id, "--name", "lab#{i}", "--memory", "2048"]
 end end end end 複製代碼

安裝

配置系統相關參數

如下操作在所有節點操作

# 臨時禁用selinux # 永久關閉 修改/etc/sysconfig/selinux文件設置
sed -i 's/SELINUX=permissive/SELINUX=disabled/' /etc/sysconfig/selinux
setenforce 0

# 臨時關閉swap # 永久關閉 註釋/etc/fstab文件裏swap相關的行
swapoff -a # 開啓forward # Docker從1.13版本開始調整了默認的防火牆規則 # 禁用了iptables filter表中FOWARD鏈 # 這樣會引起Kubernetes集羣中跨Node的Pod無法通信

iptables -P FORWARD ACCEPT

# 配置轉發相關參數，否則可能會出錯
cat <<EOF > /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
vm.swappiness=0
EOF
sysctl --system

# 加載ipvs相關內核模塊 # 如果重新開機，需要重新加載
modprobe ip_vs
modprobe ip_vs_rr
modprobe ip_vs_wrr
modprobe ip_vs_sh
modprobe nf_conntrack_ipv4
lsmod | grep ip_vs

# 配置開啓自加載
cat >/etc/modules-load.d/k8s-ipvs.conf<<EOF
ip_vs
ip_vs_rr
ip_vs_wrr
ip_vs_sh
nf_conntrack_ipv4
EOF
複製代碼

配置hosts解析

如下操作在所有節點操作

cat >>/etc/hosts<<EOF
11.11.11.111 lab1
11.11.11.112 lab2
11.11.11.113 lab3
EOF
複製代碼

安裝配置docker

v1.11.0版本推薦使用docker v17.03, v1.11,v1.12,v1.13, 也可以使用，再高版本的docker可能無法正常使用。 測試發現17.09無法正常使用，不能使用資源限制(內存CPU)

如下操作在所有節點操作

安裝docker

# 卸載安裝指定版本docker-ce
yum remove -y docker-ce docker-ce-selinux container-selinux
yum install -y --setopt=obsoletes=0 \
docker-ce-17.03.1.ce-1.el7.centos \
docker-ce-selinux-17.03.1.ce-1.el7.centos
複製代碼

啓動docker

systemctl enable docker && systemctl restart docker
複製代碼

安裝CFSSL

只在lab1節點操作

# 下載 # 百度雲鏈接：https://pan.baidu.com/s/1kgV40nwHy1IKnnLD6zH4cQ 密碼：alyj
mkdir -pv /server/software/k8s
cd /server/software/k8s
yum install -y wget
wget https://pkg.cfssl.org/R1.2/cfssl_linux-amd64
wget https://pkg.cfssl.org/R1.2/cfssljson_linux-amd64
wget https://pkg.cfssl.org/R1.2/cfssl-certinfo_linux-amd64

# 安裝
mv cfssl-certinfo_linux-amd64 /usr/local/bin/cfssl-certinfo
mv cfssl_linux-amd64 /usr/local/bin/cfssl
mv cfssljson_linux-amd64 /usr/local/bin/cfssljson
chmod +x /usr/local/bin/cfssl*
複製代碼

配置CA

只在lab1節點操作

此處的CA配置，後面配置etcd和k8s時都需要使用

mkdir -pv $HOME/ssl && cd $HOME/ssl
cat >ca-config.json<<EOF
{
 "signing": {
 "default": {
 "expiry": "87600h"
 },
 "profiles": {
 "kubernetes": {
 "usages": [
 "signing",
 "key encipherment",
 "server auth",
 "client auth"
 ],
 "expiry": "87600h"
 }
 }
 }
}
EOF
複製代碼

配置etcd集羣

生成etcd-ca

只在lab1節點操作

# 寫入配置
cat >etcd-ca-csr.json<<EOF
{
 "CN": "etcd",
 "key": {
 "algo": "rsa",
 "size": 2048
 },
 "names": [
 {
 "C": "CN",
 "ST": "BeiJing",
 "L": "BeiJing",
 "O": "etcd",
 "OU": "Etcd Security"
 }
 ]
}
EOF

# 生成 etcd root ca
cfssl gencert -initca etcd-ca-csr.json | cfssljson -bare etcd-ca

cat >etcd-csr.json<<EOF
{
 "CN": "etcd",
 "hosts": [
 "127.0.0.1",
 "11.11.11.111",
 "11.11.11.112",
 "11.11.11.113"
 ],
 "key": {
 "algo": "rsa",
 "size": 2048
 },
 "names": [
 {
 "C": "CN",
 "ST": "BeiJing",
 "L": "BeiJing",
 "O": "etcd",
 "OU": "Etcd Security"
 }
 ]
}
EOF

# 生成 etcd ca
cfssl gencert -ca=etcd-ca.pem -ca-key=etcd-ca-key.pem -config=ca-config.json \
-profile=kubernetes etcd-csr.json | cfssljson -bare etcd
mkdir -pv /etc/etcd/ssl
cp etcd*.pem /etc/etcd/ssl
ls /etc/etcd/ssl/etcd*.pem

# 複製到其他節點 cd /etc/etcd && tar cvzf etcd-ssl.tgz ssl/
scp /etc/etcd/etcd-ssl.tgz lab2:~/
scp /etc/etcd/etcd-ssl.tgz lab3:~/
ssh lab2 'mkdir -pv /etc/etcd && tar xf etcd-ssl.tgz -C /etc/etcd && ls -l /etc/etcd/ssl'
ssh lab3 'mkdir -pv /etc/etcd && tar xf etcd-ssl.tgz -C /etc/etcd && ls -l /etc/etcd/ssl' 複製代碼

安裝啓動etcd

如下操作在所有節點操作

# 安裝 # 百度雲鏈接：https://pan.baidu.com/s/1IVHyMqiJrlq9gmbF49Ly3Q 密碼：w5nx
mkdir -pv /server/software/k8s
cd /server/software/k8s
yum install -y wget
wget https://github.com/coreos/etcd/releases/download/v3.2.18/etcd-v3.2.18-linux-amd64.tar.gz
tar xf etcd-v3.2.18-linux-amd64.tar.gz
mv etcd-v3.2.18-linux-amd64 /usr/local/etcd-v3.2.18
ln -sv /usr/local/etcd-v3.2.18 /usr/local/etcd
cd /usr/local/etcd && mkdir bin && mv etcd etcdctl bin
/usr/local/etcd/bin/etcd --version
cd $HOME # 配置啓動腳本 export ETCD_NAME=$(hostname)
export INTERNAL_IP=$(hostname -i | awk '{print $NF}')
export ECTD_CLUSTER='lab1=https://11.11.11.111:2380,lab2=https://11.11.11.112:2380,lab3=https://11.11.11.113:2380'
mkdir -pv /data/etcd
cat > /etc/systemd/system/etcd.service <<EOF
[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target
Documentation=https://github.com/coreos

[Service]
Type=notify
WorkingDirectory=/data/etcd
EnvironmentFile=-/etc/etcd/etcd.conf
ExecStart=/usr/local/etcd/bin/etcd \\
 --name ${ETCD_NAME} \\
 --cert-file=/etc/etcd/ssl/etcd.pem \\
 --key-file=/etc/etcd/ssl/etcd-key.pem \\
 --peer-cert-file=/etc/etcd/ssl/etcd.pem \\
 --peer-key-file=/etc/etcd/ssl/etcd-key.pem \\
 --trusted-ca-file=/etc/etcd/ssl/etcd-ca.pem \\
 --peer-trusted-ca-file=/etc/etcd/ssl/etcd-ca.pem \\
 --initial-advertise-peer-urls https://${INTERNAL_IP}:2380 \\
 --listen-peer-urls https://${INTERNAL_IP}:2380 \\
 --listen-client-urls https://${INTERNAL_IP}:2379,https://127.0.0.1:2379 \\
 --advertise-client-urls https://${INTERNAL_IP}:2379 \\
 --initial-cluster-token my-etcd-token \\
 --initial-cluster $ECTD_CLUSTER \\
 --initial-cluster-state new \\
 --data-dir=/data/etcd
Restart=on-failure
RestartSec=5
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target
EOF

# 啓動並設置開機啓動
systemctl daemon-reload
systemctl start etcd
systemctl enable etcd
複製代碼

查看etcd集羣狀態

/usr/local/etcd/bin/etcdctl --endpoints "https://127.0.0.1:2379" \
 --ca-file=/etc/etcd/ssl/etcd-ca.pem \
 --cert-file=/etc/etcd/ssl/etcd.pem \
 --key-file=/etc/etcd/ssl/etcd-key.pem \
 cluster-health
複製代碼

生成k8s集羣的CA

# 進入相關目錄 cd $HOME/ssl

# 配置 root ca
cat >ca-csr.json<<EOF
{
 "CN": "kubernetes",
 "key": {
 "algo": "rsa",
 "size": 2048
 },
 "names": [
 {
 "C": "CN",
 "ST": "BeiJing",
 "L": "BeiJing",
 "O": "k8s",
 "OU": "System"
 }
 ],
 "ca": {
 "expiry": "87600h"
 }
}
EOF

# 生成 root ca
cfssl gencert -initca ca-csr.json | cfssljson -bare ca
ls ca*.pem

# 配置 kube-apiserver ca # 10.96.0.1 是 kube-apiserver 指定的 service-cluster-ip-range 網段的第一個IP
cat >kube-apiserver-csr.json<<EOF
{
 "CN": "kube-apiserver",
 "hosts": [
 "127.0.0.1",
 "11.11.11.111",
 "11.11.11.112",
 "11.11.11.113",
 "10.96.0.1",
 "kubernetes",
 "kubernetes.default",
 "kubernetes.default.svc",
 "kubernetes.default.svc.cluster",
 "kubernetes.default.svc.cluster.local"
 ],
 "key": {
 "algo": "rsa",
 "size": 2048
 },
 "names": [
 {
 "C": "CN",
 "ST": "BeiJing",
 "L": "BeiJing",
 "O": "k8s",
 "OU": "System"
 }
 ]
}
EOF

# 生成 kube-apiserver ca
cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json \
-profile=kubernetes kube-apiserver-csr.json | cfssljson -bare kube-apiserver
ls kube-apiserver*.pem

# 配置 kube-controller-manager ca
cat >kube-controller-manager-csr.json<<EOF
{
 "CN": "system:kube-controller-manager",
 "hosts": [
 "127.0.0.1",
 "11.11.11.111",
 "11.11.11.112",
 "11.11.11.113"
 ],
 "key": {
 "algo": "rsa",
 "size": 2048
 },
 "names": [
 {
 "C": "CN",
 "ST": "BeiJing",
 "L": "BeiJing",
 "O": "system:kube-controller-manager",
 "OU": "System"
 }
 ]
}
EOF

# 生成 kube-controller-manager ca
cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json \
-profile=kubernetes kube-controller-manager-csr.json | cfssljson -bare kube-controller-manager
ls kube-controller-manager*.pem

# 配置 kube-scheduler ca
cat >kube-scheduler-csr.json<<EOF
{
 "CN": "system:kube-scheduler",
 "hosts": [
 "127.0.0.1",
 "11.11.11.111",
 "11.11.11.112",
 "11.11.11.113"
 ],
 "key": {
 "algo": "rsa",
 "size": 2048
 },
 "names": [
 {
 "C": "CN",
 "ST": "BeiJing",
 "L": "BeiJing",
 "O": "system:kube-scheduler",
 "OU": "System"
 }
 ]
}
EOF

# 生成 kube-scheduler ca
cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json \
-profile=kubernetes kube-scheduler-csr.json | cfssljson -bare kube-scheduler
ls kube-scheduler*.pem

# 配置 kube-proxy ca
cat >kube-proxy-csr.json<<EOF
{
 "CN": "system:kube-proxy",
 "key": {
 "algo": "rsa",
 "size": 2048
 },
 "names": [
 {
 "C": "CN",
 "ST": "BeiJing",
 "L": "BeiJing",
 "O": "system:kube-proxy",
 "OU": "System"
 }
 ]
}
EOF

# 生成 kube-proxy ca
cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json \
-profile=kubernetes kube-proxy-csr.json | cfssljson -bare kube-proxy
ls kube-proxy*.pem

# 配置 admin ca
cat >admin-csr.json<<EOF
{
 "CN": "admin",
 "key": {
 "algo": "rsa",
 "size": 2048
 },
 "names": [
 {
 "C": "CN",
 "ST": "BeiJing",
 "L": "BeiJing",
 "O": "system:masters",
 "OU": "System"
 }
 ]
}
EOF

# 生成 admin ca
cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json \
-profile=kubernetes admin-csr.json | cfssljson -bare admin
ls admin*.pem

# 複製生成的ca
mkdir -pv /etc/kubernetes/pki
cp ca*.pem admin*.pem kube-proxy*.pem kube-scheduler*.pem kube-controller-manager*.pem kube-apiserver*.pem /etc/kubernetes/pki
cd /etc/kubernetes && tar cvzf pki.tgz pki/
scp /etc/kubernetes/pki.tgz lab2:~/
scp /etc/kubernetes/pki.tgz lab3:~/
ssh lab2 'mkdir -pv /etc/kubernetes && tar xf pki.tgz -C /etc/kubernetes && ls -l /etc/kubernetes/pki'
ssh lab3 'mkdir -pv /etc/kubernetes && tar xf pki.tgz -C /etc/kubernetes && ls -l /etc/kubernetes/pki' cd $HOME 複製代碼

安裝k8s文件

# 下載文件 # 需要翻牆，如果不能翻牆使用如下鏈接下載 # 鏈接：https://pan.baidu.com/s/1OI9Q4BRp7jNJUmsA8IAkbA 密碼：tnx5 cd /server/software/k8s
wget https://dl.k8s.io/v1.11.0/kubernetes-server-linux-amd64.tar.gz
tar xf kubernetes-server-linux-amd64.tar.gz
cd kubernetes/server/bin
mkdir -pv /usr/local/kubernetes-v1.11.0/bin
cp kube-apiserver kube-controller-manager kube-scheduler kube-proxy kubelet kubectl /usr/local/kubernetes-v1.11.0/bin
ln -sv /usr/local/kubernetes-v1.11.0 /usr/local/kubernetes
cp /usr/local/kubernetes/bin/kubectl /usr/local/bin/kubectl
kubectl version
cd $HOME 複製代碼

生成kubeconfig

# 使用 TLS Bootstrapping  export BOOTSTRAP_TOKEN=$(head -c 16 /dev/urandom | od -An -t x | tr -d ' ')
cat > /etc/kubernetes/token.csv <<EOF
${BOOTSTRAP_TOKEN},kubelet-bootstrap,10001,"system:kubelet-bootstrap"
EOF

# 創建 kubelet bootstrapping kubeconfig cd /etc/kubernetes
export KUBE_APISERVER="https://11.11.11.111:6443"
kubectl config set-cluster kubernetes \
 --certificate-authority=/etc/kubernetes/pki/ca.pem \
 --embed-certs=true \
 --server=${KUBE_APISERVER} \
 --kubeconfig=kubelet-bootstrap.conf
kubectl config set-credentials kubelet-bootstrap \
 --token=${BOOTSTRAP_TOKEN} \
 --kubeconfig=kubelet-bootstrap.conf
kubectl config set-context default \
 --cluster=kubernetes \
 --user=kubelet-bootstrap \
 --kubeconfig=kubelet-bootstrap.conf
kubectl config use-context default --kubeconfig=kubelet-bootstrap.conf

# 創建 kube-controller-manager kubeconfig export KUBE_APISERVER="https://11.11.11.111:6443"
kubectl config set-cluster kubernetes \
 --certificate-authority=/etc/kubernetes/pki/ca.pem \
 --embed-certs=true \
 --server=${KUBE_APISERVER} \
 --kubeconfig=kube-controller-manager.conf
kubectl config set-credentials kube-controller-manager \
 --client-certificate=/etc/kubernetes/pki/kube-controller-manager.pem \
 --client-key=/etc/kubernetes/pki/kube-controller-manager-key.pem \
 --embed-certs=true \
 --kubeconfig=kube-controller-manager.conf
kubectl config set-context default \
 --cluster=kubernetes \
 --user=kube-controller-manager \
 --kubeconfig=kube-controller-manager.conf
kubectl config use-context default --kubeconfig=kube-controller-manager.conf

# 創建 kube-scheduler kubeconfig export KUBE_APISERVER="https://11.11.11.111:6443"
kubectl config set-cluster kubernetes \
 --certificate-authority=/etc/kubernetes/pki/ca.pem \
 --embed-certs=true \
 --server=${KUBE_APISERVER} \
 --kubeconfig=kube-scheduler.conf
kubectl config set-credentials kube-scheduler \
 --client-certificate=/etc/kubernetes/pki/kube-scheduler.pem \
 --client-key=/etc/kubernetes/pki/kube-scheduler-key.pem \
 --embed-certs=true \
 --kubeconfig=kube-scheduler.conf
kubectl config set-context default \
 --cluster=kubernetes \
 --user=kube-scheduler \
 --kubeconfig=kube-scheduler.conf
kubectl config use-context default --kubeconfig=kube-scheduler.conf

# 創建 kube-proxy kubeconfig export KUBE_APISERVER="https://11.11.11.111:6443"
kubectl config set-cluster kubernetes \
 --certificate-authority=/etc/kubernetes/pki/ca.pem \
 --embed-certs=true \
 --server=${KUBE_APISERVER} \
 --kubeconfig=kube-proxy.conf
kubectl config set-credentials kube-proxy \
 --client-certificate=/etc/kubernetes/pki/kube-proxy.pem \
 --client-key=/etc/kubernetes/pki/kube-proxy-key.pem \
 --embed-certs=true \
 --kubeconfig=kube-proxy.conf
kubectl config set-context default \
 --cluster=kubernetes \
 --user=kube-proxy \
 --kubeconfig=kube-proxy.conf
kubectl config use-context default --kubeconfig=kube-proxy.conf

# 創建 admin kubeconfig export KUBE_APISERVER="https://11.11.11.111:6443"
kubectl config set-cluster kubernetes \
 --certificate-authority=/etc/kubernetes/pki/ca.pem \
 --embed-certs=true \
 --server=${KUBE_APISERVER} \
 --kubeconfig=admin.conf
kubectl config set-credentials admin \
 --client-certificate=/etc/kubernetes/pki/admin.pem \
 --client-key=/etc/kubernetes/pki/admin-key.pem \
 --embed-certs=true \
 --kubeconfig=admin.conf
kubectl config set-context default \
 --cluster=kubernetes \
 --user=admin \
 --kubeconfig=admin.conf
kubectl config use-context default --kubeconfig=admin.conf

# 把 kube-proxy.conf 複製到其他節點
scp kubelet-bootstrap.conf kube-proxy.conf lab2:/etc/kubernetes
scp kubelet-bootstrap.conf kube-proxy.conf lab3:/etc/kubernetes
cd $HOME 複製代碼

配置master相關組件

只在lab1節點操作

配置啓動kube-apiserver

# 複製 etcd ca
mkdir -pv /etc/kubernetes/pki/etcd
cd /etc/etcd/ssl
cp etcd-ca.pem etcd-key.pem etcd.pem /etc/kubernetes/pki/etcd

# 生成 service account key
openssl genrsa -out /etc/kubernetes/pki/sa.key 2048
openssl rsa -in /etc/kubernetes/pki/sa.key -pubout -out /etc/kubernetes/pki/sa.pub
ls /etc/kubernetes/pki/sa.*
cd $HOME # 啓動文件
cat >/etc/systemd/system/kube-apiserver.service<<EOF
[Unit]
Description=Kubernetes API Service
Documentation=https://github.com/kubernetes/kubernetes
After=network.target

[Service]
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/apiserver
ExecStart=/usr/local/kubernetes/bin/kube-apiserver \\
	 \$KUBE_LOGTOSTDERR \\
	 \$KUBE_LOG_LEVEL \\
	 \$KUBE_ETCD_ARGS \\
	 \$KUBE_API_ADDRESS \\
	 \$KUBE_SERVICE_ADDRESSES \\
	 \$KUBE_ADMISSION_CONTROL \\
	 \$KUBE_APISERVER_ARGS
Restart=on-failure
Type=notify
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target
EOF

# 該配置文件同時被 kube-apiserver, kube-controller-manager # kube-scheduler, kubelet, kube-proxy 使用
cat >/etc/kubernetes/config<<EOF
KUBE_LOGTOSTDERR="--logtostderr=true"
KUBE_LOG_LEVEL="--v=2"
EOF

cat >/etc/kubernetes/apiserver<<EOF
KUBE_API_ADDRESS="--advertise-address=11.11.11.111"
KUBE_ETCD_ARGS="--etcd-servers=https://11.11.11.111:2379,https://11.11.11.112:2379,https://11.11.11.113:2379 --etcd-cafile=/etc/kubernetes/pki/etcd/etcd-ca.pem --etcd-certfile=/etc/kubernetes/pki/etcd/etcd.pem --etcd-keyfile=/etc/kubernetes/pki/etcd/etcd-key.pem"
KUBE_SERVICE_ADDRESSES="--service-cluster-ip-range=10.96.0.0/12"
KUBE_ADMISSION_CONTROL="--enable-admission-plugins=NamespaceLifecycle,LimitRanger,ServiceAccount,DefaultStorageClass,DefaultTolerationSeconds,MutatingAdmissionWebhook,ValidatingAdmissionWebhook,ResourceQuota"
KUBE_APISERVER_ARGS="--allow-privileged=true --authorization-mode=Node,RBAC --enable-bootstrap-token-auth=true --token-auth-file=/etc/kubernetes/token.csv --service-node-port-range=30000-32767 --tls-cert-file=/etc/kubernetes/pki/kube-apiserver.pem --tls-private-key-file=/etc/kubernetes/pki/kube-apiserver-key.pem --client-ca-file=/etc/kubernetes/pki/ca.pem --service-account-key-file=/etc/kubernetes/pki/sa.pub --enable-swagger-ui=true --secure-port=6443 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --anonymous-auth=false --kubelet-client-certificate=/etc/kubernetes/pki/admin.pem --kubelet-client-key=/etc/kubernetes/pki/admin-key.pem"
EOF

# 啓動
systemctl daemon-reload
systemctl enable kube-apiserver
systemctl start kube-apiserver
systemctl status kube-apiserver

# 瀏覽器訪問測試
https://11.11.11.111:6443/swaggerapi
複製代碼

配置啓動kube-controller-manager

# 啓動文件
cat >/etc/systemd/system/kube-controller-manager.service<<EOF
Description=Kubernetes Controller Manager
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/controller-manager
ExecStart=/usr/local/kubernetes/bin/kube-controller-manager \\
	 \$KUBE_LOGTOSTDERR \\
	 \$KUBE_LOG_LEVEL \\
	 \$KUBECONFIG \\
	 \$KUBE_CONTROLLER_MANAGER_ARGS
Restart=on-failure
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target
EOF

cat >/etc/kubernetes/controller-manager<<EOF
KUBECONFIG="--kubeconfig=/etc/kubernetes/kube-controller-manager.conf"
KUBE_CONTROLLER_MANAGER_ARGS="--address=127.0.0.1 --cluster-cidr=10.244.0.0/16 --cluster-name=kubernetes --cluster-signing-cert-file=/etc/kubernetes/pki/ca.pem --cluster-signing-key-file=/etc/kubernetes/pki/ca-key.pem --service-account-private-key-file=/etc/kubernetes/pki/sa.key --root-ca-file=/etc/kubernetes/pki/ca.pem --leader-elect=true --use-service-account-credentials=true --node-monitor-grace-period=10s --pod-eviction-timeout=10s --allocate-node-cidrs=true --controllers=*,bootstrapsigner,tokencleaner"
EOF

# 啓動
systemctl daemon-reload
systemctl enable kube-controller-manager
systemctl start kube-controller-manager
systemctl status kube-controller-manager
複製代碼

配置啓動kube-scheduler

cat >/etc/systemd/system/kube-scheduler.service<<EOF
[Unit]
Description=Kubernetes Scheduler Plugin
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/scheduler
ExecStart=/usr/local/kubernetes/bin/kube-scheduler \\
 \$KUBE_LOGTOSTDERR \\
 \$KUBE_LOG_LEVEL \\
 \$KUBECONFIG \\
 \$KUBE_SCHEDULER_ARGS
Restart=on-failure
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target
EOF

cat >/etc/kubernetes/scheduler<<EOF
KUBECONFIG="--kubeconfig=/etc/kubernetes/kube-scheduler.conf"
KUBE_SCHEDULER_ARGS="--leader-elect=true --address=127.0.0.1"
EOF

# 啓動
systemctl daemon-reload
systemctl enable kube-scheduler
systemctl start kube-scheduler
systemctl status kube-scheduler
複製代碼

配置kubectl使用

rm -rf $HOME/.kube
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
kubectl get no
複製代碼

查看組件狀態

kubectl get componentstatuses
複製代碼

配置kubelet使用bootstrap

# 將 bootstrap token 文件中的 kubelet-bootstrap 用戶賦予 system:node-bootstrapper cluster 角色
kubectl create clusterrolebinding kubelet-bootstrap \
--clusterrole=system:node-bootstrapper \
--user=kubelet-bootstrap
複製代碼

配置node相關組件

如下操作在所有節點操作

安裝cni

# 安裝 cni # 百度雲鏈接：https://pan.baidu.com/s/1-PputObLs5jouXLnuBCI6Q 密碼：tzqm cd /server/software/k8s
wget https://github.com/containernetworking/plugins/releases/download/v0.7.1/cni-plugins-amd64-v0.7.1.tgz
mkdir -pv /opt/cni/bin
tar xf cni-plugins-amd64-v0.7.1.tgz -C /opt/cni/bin
ls -l /opt/cni/bin
cd $HOME 複製代碼

配置啓動kubelet

# 啓動文件
mkdir -pv /data/kubelet
cat >/etc/systemd/system/kubelet.service<<EOF
[Unit]
Description=Kubernetes Kubelet Server
Documentation=https://github.com/kubernetes/kubernetes
After=docker.service
Requires=docker.service

[Service]
WorkingDirectory=/data/kubelet
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/kubelet
ExecStart=/usr/local/kubernetes/bin/kubelet \\
 \$KUBE_LOGTOSTDERR \\
 \$KUBE_LOG_LEVEL \\
 \$KUBELET_CONFIG \\
 \$KUBELET_HOSTNAME \\
 \$KUBELET_POD_INFRA_CONTAINER \\
 \$KUBELET_ARGS
Restart=on-failure

[Install]
WantedBy=multi-user.target
EOF

cat >/etc/kubernetes/config<<EOF
KUBE_LOGTOSTDERR="--logtostderr=true"
KUBE_LOG_LEVEL="--v=2"
EOF

# 注意修改相關ip
cat >/etc/kubernetes/kubelet<<EOF
KUBELET_HOSTNAME="--hostname-override=11.11.11.111"
KUBELET_POD_INFRA_CONTAINER="--pod-infra-container-image=registry.cn-hangzhou.aliyuncs.com/google_containers/pause-amd64:3.1"
KUBELET_CONFIG="--config=/etc/kubernetes/kubelet-config.yml"
KUBELET_ARGS="--bootstrap-kubeconfig=/etc/kubernetes/kubelet-bootstrap.conf --kubeconfig=/etc/kubernetes/kubelet.conf --cert-dir=/etc/kubernetes/pki --network-plugin=cni --cni-bin-dir=/opt/cni/bin --cni-conf-dir=/etc/cni/net.d"
EOF

# 注意修改相關ip # lab1 lab2 lab3 使用各自ip
cat >/etc/kubernetes/kubelet-config.yml<<EOF
kind: KubeletConfiguration
apiVersion: kubelet.config.k8s.io/v1beta1
address: 11.11.11.111
port: 10250
cgroupDriver: cgroupfs
clusterDNS:
 - 10.96.0.10
clusterDomain: cluster.local.
hairpinMode: promiscuous-bridge
serializeImagePulls: false
authentication:
 x509:
 clientCAFile: /etc/kubernetes/pki/ca.pem
EOF

# 啓動
systemctl daemon-reload
systemctl enable kubelet
systemctl start kubelet
systemctl status kubelet
複製代碼

通過證書請求

# 在配置了kubectl的節點上執行如下操作 # 查看
kubectl get csr

# 通過
kubectl certificate approve node-csr-Yiiv675wUCvQl3HH11jDr0cC9p3kbrXWrxvG3EjWGoE

# 查看節點 # 此時節點狀態爲 NotReady
kubectl get nodes

# 在node節點查看生成的文件
ls -l /etc/kubernetes/kubelet.conf
ls -l /etc/kubernetes/pki/kubelet*
複製代碼

配置啓動kube-proxy

# 安裝
yum install -y conntrack-tools

# 啓動文件
cat >/etc/systemd/system/kube-proxy.service<<EOF
[Unit]
Description=Kubernetes Kube-Proxy Server
Documentation=https://github.com/kubernetes/kubernetes
After=network.target

[Service]
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/proxy
ExecStart=/usr/local/kubernetes/bin/kube-proxy \\
	 \$KUBE_LOGTOSTDERR \\
	 \$KUBE_LOG_LEVEL \\
	 \$KUBECONFIG \\
	 \$KUBE_PROXY_ARGS
Restart=on-failure
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target
EOF

# 注意修改相關ip # lab1 lab2 lab3 使用各自ip # 由於 1.11.0 ipvs 在centos7上有bug無法正常使用 # 實驗使用 iptables 模式 # 以後版本可以使用 ipvs 模式
cat >/etc/kubernetes/proxy<<EOF
KUBECONFIG="--kubeconfig=/etc/kubernetes/kube-proxy.conf"
KUBE_PROXY_ARGS="--bind-address=11.11.11.111 --proxy-mode=iptables --hostname-override=11.11.11.111 --cluster-cidr=10.244.0.0/16"
EOF

# 啓動
systemctl daemon-reload
systemctl enable kube-proxy
systemctl start kube-proxy
systemctl status kube-proxy
複製代碼

設置集羣角色

# 設置 lab1 爲 master
kubectl label nodes 11.11.11.111 node-role.kubernetes.io/master=

# 設置 lab2 lab3 爲 node
kubectl label nodes 11.11.11.112 node-role.kubernetes.io/node=
kubectl label nodes 11.11.11.113 node-role.kubernetes.io/node=

# 設置 master 一般情況下不接受負載
kubectl taint nodes 11.11.11.111 node-role.kubernetes.io/master=true:NoSchedule

# 查看節點 # 此時節點狀態爲 NotReady
kubectl get no
複製代碼

配置使用flannel網絡

在lab1操作

# 下載配置
mkdir flannel && cd flannel
wget https://raw.githubusercontent.com/coreos/flannel/v0.10.0/Documentation/kube-flannel.yml

# 修改配置 # 此處的ip配置要與上面kubeadm的pod-network一致
 net-conf.json: |
 {
 "Network": "10.244.0.0/16",
 "Backend": {
 "Type": "vxlan"
 }
 }

# 修改鏡像
image: registry.cn-shanghai.aliyuncs.com/gcr-k8s/flannel:v0.10.0-amd64

# 如果Node有多個網卡的話，參考flannel issues 39701， # https://github.com/kubernetes/kubernetes/issues/39701 # 目前需要在kube-flannel.yml中使用--iface參數指定集羣主機內網網卡的名稱， # 否則可能會出現dns無法解析。容器無法通信的情況，需要將kube-flannel.yml下載到本地， # flanneld啓動參數加上--iface=<iface-name>
 containers:
 - name: kube-flannel
 image: registry.cn-shanghai.aliyuncs.com/gcr-k8s/flannel:v0.10.0-amd64
 command:
 - /opt/bin/flanneld
 args:
 - --ip-masq
 - --kube-subnet-mgr
 - --iface=eth1

# 啓動
kubectl apply -f kube-flannel.yml

# 查看
kubectl get pods -n kube-system
kubectl get svc -n kube-system

# 查看節點狀態 # 當 flannel pod 全部啓動之後，節點狀態爲 Ready
kubectl get no
複製代碼

配置使用coredns

在lab1操作

# 安裝 # 10.96.0.10 kubelet中配置的dns cd $HOME && mkdir coredns && cd coredns
wget https://raw.githubusercontent.com/coredns/deployment/master/kubernetes/coredns.yaml.sed
wget https://raw.githubusercontent.com/coredns/deployment/master/kubernetes/deploy.sh
chmod +x deploy.sh
./deploy.sh -i 10.96.0.10 > coredns.yml
kubectl apply -f coredns.yml

# 查看
kubectl get pods -n kube-system
kubectl get svc -n kube-system
複製代碼

測試

啓動

kubectl run nginx --replicas=2 --image=nginx:alpine --port=80
kubectl expose deployment nginx --type=NodePort --name=example-service-nodeport
kubectl expose deployment nginx --name=example-service
kubectl scale --replicas=3 deployment/nginx
複製代碼

查看狀態

kubectl get deploy -o wide
kubectl get pods -o wide
kubectl get svc -o wide
kubectl describe svc example-service
複製代碼

DNS解析

kubectl run curl --image=radial/busyboxplus:curl -i --tty
nslookup kubernetes
nslookup example-service
curl example-service
複製代碼

訪問測試

# 10.96.59.56 爲查看svc時獲取到的clusterip
curl "10.107.91.153:80" # 32223 爲查看svc時獲取到的 nodeport
http://11.11.11.111:32223/
http://11.11.11.112:32223/
http://11.11.11.113:32223/
複製代碼

清理

kubectl delete svc example-service example-service-nodeport
kubectl delete deploy nginx curl

本文轉自掘金-centos7純手動安裝kubernetes-v1.11版本