Flume学习之路 （三）Flume的配置方式

原創 小左先森 2019-02-22 14:40

一、单一代理流配置

1.1　官网介绍

http://flume.apache.org/FlumeUserGuide.html#avro-source

通过一个通道将来源和接收器链接。需要列出源，接收器和通道，为给定的代理，然后指向源和接收器及通道。一个源的实例可以指定多个通道，但只能指定一个接收器实例。格式如下：

# list the sources, sinks and channels for the agent
<Agent>.sources = <Source>
<Agent>.sinks = <Sink>
<Agent>.channels = <Channel1> <Channel2>

# set channel for source
<Agent>.sources.<Source>.channels = <Channel1> <Channel2> ...

# set channel for sink
<Agent>.sinks.<Sink>.channel = <Channel1>

实例解析：一个代理名为agent_foo，外部通过avro客户端，并且发送数据通过内存通道给hdfs。在配置文件foo.config的可能看起来像这样：

# list the sources, sinks and channels for the agent
agent_foo.sources = avro-appserver-src-1
agent_foo.sinks = hdfs-sink-1
agent_foo.channels = mem-channel-1

# set channel for source
agent_foo.sources.avro-appserver-src-1.channels = mem-channel-1

# set channel for sink
agent_foo.sinks.hdfs-sink-1.channel = mem-channel-1

案例说明：这将使事件流从avro-appserver-src-1到hdfs-sink-1通过内存通道mem-channel-1。当代理开始foo.config作为其配置文件，它会实例化流。

配置单个组件

定义流之后，需要设置每个源，接收器和通道的属性。可以分别设定组件的属性值。

# properties for sources
<Agent>.sources.<Source>.<someProperty> = <someValue>

# properties for channels
<Agent>.channel.<Channel>.<someProperty> = <someValue>

# properties for sinks
<Agent>.sources.<Sink>.<someProperty> = <someValue>

“type”属性必须为每个组件设置，以了解它需要什么样的对象。每个源，接收器和通道类型有其自己的一套，它所需的性能，以实现预期的功能。所有这些，必须根据需要设置。在前面的例子中，从hdfs-sink-1中的流到HDFS，通过内存通道mem-channel-1的avro-appserver-src-1源。下面是 一个例子，显示了这些组件的配置。

agent_foo.sources = avro-AppSrv-source
agent_foo.sinks = hdfs-Cluster1-sink
agent_foo.channels = mem-channel-1

# set channel for sources, sinks

# properties of avro-AppSrv-source
agent_foo.sources.avro-AppSrv-source.type = avro
agent_foo.sources.avro-AppSrv-source.bind = localhost
agent_foo.sources.avro-AppSrv-source.port = 10000

# properties of mem-channel-1
agent_foo.channels.mem-channel-1.type = memory
agent_foo.channels.mem-channel-1.capacity = 1000
agent_foo.channels.mem-channel-1.transactionCapacity = 100

# properties of hdfs-Cluster1-sink
agent_foo.sinks.hdfs-Cluster1-sink.type = hdfs
agent_foo.sinks.hdfs-Cluster1-sink.hdfs.path = hdfs://namenode/flume/webdata

#...

1.2　测试示例（一）

通过flume来监控一个目录，当目录中有新文件时，将文件内容输出到控制台。

创建一个test01.conf的文件：

#配置一个agent，agent的名称可以自定义（如a1）
#指定agent的sources（如s1）、sinks（如k1）、channels（如c1）
#分别指定agent的sources，sinks,channels的名称 名称可以自定义
a1.sources = s1  
a1.sinks = k1  
a1.channels = c1  

#描述source
#配置目录scource
a1.sources.s1.type = spooldir  
a1.sources.s1.spoolDir = /opt/flume/logs  
a1.sources.s1.fileHeader= true  
a1.sources.s1.channels =c1  

#配置sink 
a1.sinks.k1.type = logger  
a1.sinks.k1.channel = c1  

#配置channel(内存做缓存)
a1.channels.c1.type = memory

启动命令

./bin/flume-ng agent --conf conf --conf-file ./conf/test1.conf --name a1 -Dflume.root.logger=INFO,console

测试 Flume

重新打开一个终端，我们将123.log移动到logs目录

$ cp test.log logs/

原始的Flume终端将在日志消息中输出事件：

2018-11-03 03:54:54,207 (pool-3-thread-1) [INFO - org.apache.flume.client.avro.ReliableSpoolingFileEventReader.readEvents(ReliableSpoolingFileEventReader.java:324)] Last read took us just up to a file boundary. Rolling to the next file, if there is one.
2018-11-03 03:54:54,207 (pool-3-thread-1) [INFO - org.apache.flume.client.avro.ReliableSpoolingFileEventReader.rollCurrentFile(ReliableSpoolingFileEventReader.java:433)] Preparing to move file /opt/flume/logs/test.log to /opt/flume/logs/test.log.COMPLETED
2.6　NetCat Source

1.3　测试案例（二）

案例2：实时模拟从web服务器中读取数据到hdfs中

此处使用 exec source 详细参考 上一节里面的 2.3 Exec Source 介绍

二、单代理多流配置

单个Flume代理可以包含几个独立的流。你可以在一个配置文件中列出多个源，接收器和通道。这些组件可以连接形成多个流。

# list the sources, sinks and channels for the agent
<Agent>.sources = <Source>
<Agent>.sinks = <Sink>
<Agent>.channels = <Channel1> <Channel2>

# set channel for source
<Agent>.sources.<Source>.channels = <Channel1> <Channel2> ...

# set channel for sink
<Agent>.sinks.<Sink>.channel = <Channel1>

可以连接源和接收器到其相应的通道，设置两个不同的流。例如，如果需要设置一个agent_foo代理两个流，一个从外部Avro客户端到HDFS，另外一个是tail的输出到Avro接收器，然后在这里是做一个配置。

2.1　官方案例

# list the sources, sinks and channels in the agent
agent_foo.sources = avro-AppSrv-source1 exec-tail-source2
agent_foo.sinks = hdfs-Cluster1-sink1 avro-forward-sink2
agent_foo.channels = mem-channel-1 file-channel-2

# flow #1 configuration
agent_foo.sources.avro-AppSrv-source1.channels = mem-channel-1
agent_foo.sinks.hdfs-Cluster1-sink1.channel = mem-channel-1

# flow #2 configuration
agent_foo.sources.exec-tail-source2.channels = file-channel-2
agent_foo.sinks.avro-forward-sink2.channel = file-channel-2

三、配置多代理流程

设置一个多层的流，需要有一个指向下一跳avro源的第一跳的avro 接收器。这将导致第一Flume代理转发事件到下一个Flume代理。例如，如果定期发送的文件，每个事件（1文件）AVRO客户端使用本地Flume 代理，那么这个当地的代理可以转发到另一个有存储的代理。

配置如下：

3.1　官方案例

Weblog agent config:

# list sources, sinks and channels in the agent
agent_foo.sources = avro-AppSrv-source
agent_foo.sinks = avro-forward-sink
agent_foo.channels = file-channel

# define the flow
agent_foo.sources.avro-AppSrv-source.channels = file-channel
agent_foo.sinks.avro-forward-sink.channel = file-channel

# avro sink properties
agent_foo.sinks.avro-forward-sink.type = avro
agent_foo.sinks.avro-forward-sink.hostname = 10.1.1.100
agent_foo.sinks.avro-forward-sink.port = 10000

# configure other pieces
#...

HDFS agent config:

# list sources, sinks and channels in the agent
agent_foo.sources = avro-collection-source
agent_foo.sinks = hdfs-sink
agent_foo.channels = mem-channel

# define the flow
agent_foo.sources.avro-collection-source.channels = mem-channel
agent_foo.sinks.hdfs-sink.channel = mem-channel

# avro source properties
agent_foo.sources.avro-collection-source.type = avro
agent_foo.sources.avro-collection-source.bind = 10.1.1.100
agent_foo.sources.avro-collection-source.port = 10000

# configure other pieces
#...

这里连接从weblog-agent的avro-forward-sink 到hdfs-agent的avro-collection-source收集源。最终结果从外部源的appserver最终存储在HDFS的事件。

3.2　测试案例

创建一个case_avro.conf的文件：

a1.sources = s1
a1.sinks = k1
a1.channels = c1

a1.sources.s1.type = avro
a1.sources.s1.channels = c1
a1.sources.s1.bind = localhost
a1.sources.s1.port = 22222

a1.channels.c1.type = memory
a1.channels.c1.capacity = 1000
a1.channels.c1.transactionCapacity = 100

a1.sinks.k1.type = logger
a1.sinks.k1.channel = c1

创建一个case_avro_sink.conf的文件：

a2.sources = s1
a2.sinks = k1
a2.channels = c1

a2.sources.s1.type = syslogtcp
a2.sources.s1.channels = c1
a2.sources.s1.host = 192.168.123.102
a2.sources.s1.port = 33333

a2.channels.c1.type = memory
a2.channels.c1.capacity = 1000
a2.channels.c1.transactionCapacity = 100

a2.sinks.k1.type = avro
a2.sinks.k1.hostname = 192.168.123.102
a2.sinks.k1.port = 22222
a2.sinks.k1.channel = c1

说明：case_avro_sink.conf是前面的Agent，case_avro.conf是后面的Agent

先启动Avro的Source,监听端口

$ ./bin/flume-ng agent --conf conf --conf-file ./conf/case_avro.conf --name a1 -Dflume.root.logger=DEBUG,console -Dorg.apache.flume.log.printconfig=true -Dorg.apache.flume.log.rawdata=true

再启动Avro的Sink

$ ./bin/flume-ng agent --conf conf --conf-file ./conf/case_avro_sink.conf --name a2 -Dflume.root.logger=DEBUG,console -Dorg.apache.flume.log.printconfig=true -Dorg.apache.flume.log.rawdata=true

可以看到已经建立连接
Flume学习之路 （三）Flume的配置方式

在Avro Sink上生成测试log

$ echo "hello flume avro sink" | nc 192.168.1.102 33333

查看结果：
Flume学习之路 （三）Flume的配置方式

四、多路复用流

Flume支持扇出流从一个源到多个通道。有两种模式的扇出，复制和复用。在复制流的事件被发送到所有的配置通道。在复用的情况下，事件被发送到合格的渠 道只有一个子集。扇出流，需要指定源和扇出通道的规则。这是通过添加一个通道“选择”，可以复制或复用。再进一步指定选择的规则，如果它是一个多路。如果你 不指定一个选择，则默认情况下它复制。

# list the sources, sinks and channels for the agent
<Agent>.sources = <Source>
<Agent>.sinks = <Sink>
<Agent>.channels = <Channel1> <Channel2>

# set channel for source
<Agent>.sources.<Source>.channels = <Channel1> <Channel2> ...

# set channel for sink
<Agent>.sinks.<Sink>.channel = <Channel1>

复用的选择集的属性进一步分叉。这需要指定一个事件属性映射到一组通道。选择配置属性中的每个事件头检查。如果指定的值相匹配，那么该事件被发送到所有的通道映射到该值。如果没有匹配，那么该事件被发送到设置为默认配置的通道。

# Mapping for multiplexing selector
<Agent>.sources.<Source1>.selector.type = multiplexing
<Agent>.sources.<Source1>.selector.header = <someHeader>
<Agent>.sources.<Source1>.selector.mapping.<Value1> = <Channel1>
<Agent>.sources.<Source1>.selector.mapping.<Value2> = <Channel1> <Channel2>
<Agent>.sources.<Source1>.selector.mapping.<Value3> = <Channel2>
#...

<Agent>.sources.<Source1>.selector.default = <Channel2>

映射允许每个值通道可以重叠。默认值可以包含任意数量的通道。下面的示例中有一个单一的流复用两条路径。代理有一个单一的avro源和连接道两个接收器的两个通道。

4.1　官方案例

# list the sources, sinks and channels in the agent
agent_foo.sources = avro-AppSrv-source1
agent_foo.sinks = hdfs-Cluster1-sink1 avro-forward-sink2
agent_foo.channels = mem-channel-1 file-channel-2

# set channels for source
agent_foo.sources.avro-AppSrv-source1.channels = mem-channel-1 file-channel-2

# set channel for sinks
agent_foo.sinks.hdfs-Cluster1-sink1.channel = mem-channel-1
agent_foo.sinks.avro-forward-sink2.channel = file-channel-2

# channel selector configuration
agent_foo.sources.avro-AppSrv-source1.selector.type = multiplexing
agent_foo.sources.avro-AppSrv-source1.selector.header = State
agent_foo.sources.avro-AppSrv-source1.selector.mapping.CA = mem-channel-1
agent_foo.sources.avro-AppSrv-source1.selector.mapping.AZ = file-channel-2
agent_foo.sources.avro-AppSrv-source1.selector.mapping.NY = mem-channel-1 file-channel-2
agent_foo.sources.avro-AppSrv-source1.selector.default = mem-channel-1

“State”作为Header的选择检查。如果值是“CA”，然后将其发送到mem-channel-1，如果它的“AZ”的，那么jdbc- channel-2，如果它的“NY”那么发到这两个。如果“State”头未设置或不匹配的任何三个，然后去默认的mem-channel-1通道。

4.2　测试案例（一）复制

case_replicate_sink.conf

a1.sources = s1
a1.sinks = k1 k2
a1.channels = c1 c2

a1.sources.s1.type = syslogtcp
a1.sources.s1.channels = c1 c2
a1.sources.s1.host = 192.168.1.102
a1.sources.s1.port = 6666
a1.sources.s1.selector.type = replicating

a1.channels.c1.type = memory
a1.channels.c1.capacity = 1000
a1.channels.c1.transactionCapacity = 100

a1.channels.c2.type = memory
a1.channels.c2.capacity = 1000
a1.channels.c2.transactionCapacity = 100

a1.sinks.k1.type = avro
a1.sinks.k1.hostname = 192.168.1.102
a1.sinks.k1.port = 7777
a1.sinks.k1.channel = c1

a1.sinks.k1.type = avro
a1.sinks.k1.hostname = 192.168.1.102
a1.sinks.k1.port = 7777
a1.sinks.k1.channel = c2

case_replicate_s1.conf

a2.sources = s1
a2.sinks = k1
a2.channels = c1

a2.sources.s1.type = avro
a2.sources.s1.channels = c1
a2.sources.s1.host = 192.168.1.102
a2.sources.s1.port = 7777

a2.channels.c1.type = memory
a2.channels.c1.capacity = 1000
a2.channels.c1.transactionCapacity = 100

a2.sinks.k1.type = logger
a2.sinks.k1.channel = c1

case_replicate_s2.conf

a3.sources = s1
a3.sinks = k1
a3.channels = c1

a3.sources.s1.type = avro
a3.sources.s1.channels = c1
a3.sources.s1.host = 192.168.1.102
a3.sources.s1.port = 7777

a3.channels.c1.type = memory
a3.channels.c1.capacity = 1000
a3.channels.c1.transactionCapacity = 100

a3.sinks.k1.type = logger
a3.sinks.k1.channel = c1

先启动Avro的Source，监听端口

$ ./bin/flume-ng agent --conf conf --conf-file ./conf/case_replicate_s1.conf --name a2 -Dflume.root.logger=DEBUG,console -Dorg.apache.flume.log.printconfig=true -Dorg.apache.flume.log.rawdata=true
$ ./bin/flume-ng agent --conf conf --conf-file ./conf/case_replicate_s2.conf --name a3 -Dflume.root.logger=DEBUG,console -Dorg.apache.flume.log.printconfig=true -Dorg.apache.flume.log.rawdata=true

再启动Avro的Sink

$ ./bin/flume-ng agent --conf conf --conf-file ./confcase_replicate_sink.conf --name a1 -Dflume.root.logger=DEBUG,console -Dorg.apache.flume.log.printconfig=true -Dorg.apache.flume.log.rawdata=true

生成测试log

$ echo "hello via channel selector" | nc 192.168.1.102 6666

4.3　测试案例（二）复用

case_multi_sink.conf

#2个channel和2个sink的配置文件
a1.sources = r1
a1.sinks = k1 k2
a1.channels = c1 c2

# Describe/configure the source
a1.sources.r1.type = org.apache.flume.source.http.HTTPSource
a1.sources.r1.port = 5140
a1.sources.r1.host = 0.0.0.0
a1.sources.r1.selector.type = multiplexing
a1.sources.r1.channels = c1 c2

a1.sources.r1.selector.header = state
a1.sources.r1.selector.mapping.CZ = c1
a1.sources.r1.selector.mapping.US = c2
a1.sources.r1.selector.default = c1

# Describe the sink
a1.sinks.k1.type = avro
a1.sinks.k1.channel = c1
a1.sinks.k1.hostname = 192.168.1.102
a1.sinks.k1.port = 4545

a1.sinks.k2.type = avro
a1.sinks.k2.channel = c2
a1.sinks.k2.hostname = 192.168.1.102
a1.sinks.k2.port = 4545
# Use a channel which buffers events in memory
a1.channels.c1.type = memory
a1.channels.c1.capacity = 1000
a1.channels.c1.transactionCapacity = 100

a1.channels.c2.type = memory
a1.channels.c2.capacity = 1000
a1.channels.c2.transactionCapacity = 100

case_ multi _s1.conf

# Name the components on this agent
a2.sources = r1
a2.sinks = k1
a2.channels = c1

# Describe/configure the source
a2.sources.r1.type = avro
a2.sources.r1.channels = c1
a2.sources.r1.bind = 192.168.1.102
a2.sources.r1.port = 4545

# Describe the sink
a2.sinks.k1.type = logger
 a2.sinks.k1.channel = c1

# Use a channel which buffers events in memory
a2.channels.c1.type = memory
a2.channels.c1.capacity = 1000
a2.channels.c1.transactionCapacity = 100

case_ multi _s2.conf

# Name the components on this agent
a3.sources = r1
a3.sinks = k1
a3.channels = c1

# Describe/configure the source
a3.sources.r1.type = avro
a3.sources.r1.channels = c1
a3.sources.r1.bind = 192.168.1.102
a3.sources.r1.port = 4545

# Describe the sink
a3.sinks.k1.type = logger
 a3.sinks.k1.channel = c1

# Use a channel which buffers events in memory
a3.channels.c1.type = memory
a3.channels.c1.capacity = 1000
a3.channels.c1.transactionCapacity = 100

先启动Avro的Source，监听端口

$ ./bin/flume-ng agent -c . -f ./conf/case_ multi _s1.conf -n a2 -Dflume.root.logger=INFO,console

$ ./bin/flume-ng agent -c . -f ./conf/case_ multi _s2.conf -n a3 -Dflume.root.logger=INFO,console

再启动Avro的Sink

$ ./bin/lume-ng agent -c . -f ./conf/case_multi_sink.conf -n a1 -Dflume.root.logger=INFO,console

根据配置文件生成测试的header 为state的POST请求

$ curl -X POST -d '[{ "headers" :{"state" : "CZ"},"body" : "TEST1"}]' http://localhost:5140

$ curl -X POST -d '[{ "headers" :{"state" : "US"},"body" : "TEST2"}]' http://localhost:5140

$ curl -X POST -d '[{ "headers" :{"state" : "SH"},"body" : "TEST3"}]' http://localhost:5140
發表評論
所有評論
還沒有人評論，想成為第一個評論的人麼? 請在上方評論欄輸入並且點擊發布.
相關文章

Flume学习之路 （三）Flume的配置方式

小左先森 2018-11-12 02:15:03

flume案例支持

馬吉輝 2019-02-23 13:06:05

Flume日志收集分层架构应用实践

workming 2019-02-23 00:24:11

flume从kafka读取数据到hdfs中的配置

qwerpou 2019-02-22 21:31:42

Flume-ng分布式环境的部署和配置(一)

ydt619 2019-02-22 20:59:09

Flume-ng分布式环境的部署和配置(二)

ydt619 2019-02-22 20:59:09

开源日志系统比较

zouliuyun 2019-02-22 17:29:54

Flume1.4学习问题记录

末班車New 2019-02-22 14:55:09

Flume学习之路 （二）Flume的Source类型

小左先森 2019-02-22 14:40:29

Flume学习之路 （一）Flume的基础介绍

小左先森 2019-02-22 14:40:26

flume实际生产场景分析

原生zzy 2019-01-18 13:37:20

flume典型应用场景

原生zzy 2019-01-18 13:37:20

flume从kafka读取数据到hdfs中的配置

qwerpou 2018-12-25 13:55:51

Flume学习之路 （二）Flume的Source类型

小左先森 2018-11-12 02:14:52

Flume学习之路 （一）Flume的基础介绍

小左先森 2018-11-12 02:14:52