assume the computers are call XPMACHINE and W7MACHINE.
1) Ensure Printer on XP machine is shared - assume it's called SHAREDPRINTER.
xp的托打印机
2) On the Network Browsing on your W7 machine ensure you can "See" the Printer share.
就是xp的打印机和w7一个局域网,而且可以看到。
Now on the W7 machine do the following (doesn't matter if it's X-86 or x-64).
3) Control Panel==> add LOCAL (Yes LOCAL) printer. I know it's on a Network but hold your horses -- what we are actually doing is "Poodlefaking" the W7 machine into thinking it's running the printer.
这步最主要,通过控制面板,添加打印机,添加的是本地的打印机,而不是网络。这个和以前不同,我试过添加网络打印机没办法搞定的。
4) Create NEW port==>Local port
添加一个新的端口,选择本地接口
5) Portname is [url=file://xpmachine/SHAREDPRINTER]\\XPMACHINE\SHAREDPRINTER[/url]
\\主机ip或者网络名\打印机名
6) Now W7 will load a driver and you'll be able to print on the XP machine.
到这部的时候,我的又出了点问题,因为添加的驱动里面没看到hp 1200的,估计打印机太老了,谁让hp老打印机这么结实,老不坏。这个时候,我选择了利用windows update更新驱动,更新完后发现里面就有hp1200的,然后点击下一步,就ok了,测试无任何问题,这方法不错
***
(For a "Network stand alone printer") at 4) chose TCPIP port
and at 5) enter the IP address.
If the printer is on the W7 machine and you want to print on the XP machine then do the same instructions on the XP machine --
port name in this case will be [url=file://w7machine/SHAREDPRINTER]\\W7MACHINE\SHAREDPRINTER[/url]
win7 X64位安装hp激光打印机驱动
發表評論
所有評論
還沒有人評論,想成為第一個評論的人麼? 請在上方評論欄輸入並且點擊發布.
相關文章
Linux基本操作命令
wbzjacky
2019-02-24 13:12:38
真实的模拟***综合实验
wbzjacky
2019-02-24 13:12:37
三层交换机的HSRP、vlan、端口聚合
wbzjacky
2019-02-24 13:12:37
HSRP和二层交换机的端口聚合、vlan
wbzjacky
2019-02-24 13:12:37
服务器双机热备解决方案
wbzjacky
2019-02-24 13:12:37
各种光模块的传输距离
realzfd
2019-02-24 13:10:25
ESX4 通过VMware vSphere CLI 开启snmp
realzfd
2019-02-24 13:09:43
SOLARWINDS服务器更改计算机名导致的一次奇怪故障
realzfd
2019-02-24 13:09:42
Dlink交换机常用命令
千年小道
2019-02-24 13:06:21
Sametime的安装细节问题
god9394
2019-02-24 13:04:19
电信禁止路由器上网的破解方法
god9394
2019-02-24 13:03:51