etcd+flannel跨節點容器網絡組建

ubuntu16.04

安裝etcd

apt-get install etcd

編輯配置文件

vim /etc/default/etcd

#[member]
ETCD_NAME=node01                                            #節點名稱
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"                  #數據存放位置
#ETCD_WAL_DIR=""
#ETCD_SNAPSHOT_COUNT="10000"
#ETCD_HEARTBEAT_INTERVAL="100"
#ETCD_ELECTION_TIMEOUT="1000"
#ETCD_LISTEN_PEER_URLS="http://0.0.0.0:2380"
ETCD_LISTEN_CLIENT_URLS="http://0.0.0.0:2379,http://0.0.0.0:4001"             #監聽客戶端地址
#ETCD_MAX_SNAPSHOTS="5"
#ETCD_MAX_WALS="5"
#ETCD_CORS=""
#
#[cluster]
#ETCD_INITIAL_ADVERTISE_PEER_URLS="http://localhost:2380"
# if you use different ETCD_NAME (e.g. test), set ETCD_INITIAL_CLUSTER value for this name, i.e. "test=http://..."
#ETCD_INITIAL_CLUSTER="default=http://localhost:2380"
#ETCD_INITIAL_CLUSTER_STATE="new"
#ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_ADVERTISE_CLIENT_URLS="http://node01:2379,http://node01:4001"           #通知客戶端地址
#ETCD_DISCOVERY=""
#ETCD_DISCOVERY_SRV=""
#ETCD_DISCOVERY_FALLBACK="proxy"
#ETCD_DISCOVERY_PROXY=""

啓動etcd並驗證狀態

[root@node01 ~]# systemctl start etcd  
[root@node01 ~]# ps -ef|grep etcd
etcd     28145     1  1 14:38 ?        00:00:00 /usr/bin/etcd --name=master --data-dir=/var/lib/etcd/default.etcd --listen-client-urls=http://0.0.0.0:2379,http://0.0.0.0:4001
root     28185 24819  0 14:38 pts/1    00:00:00 grep --color=auto etcd
[root@node01 ~]# lsof -i:2379
COMMAND   PID USER   FD   TYPE DEVICE SIZE/OFF NODE NAME
etcd    28145 etcd   6u IPv6 1283822     0t0 TCP *:2379 (LISTEN)
etcd    28145 etcd   18u IPv6 1284133     0t0 TCP localhost:53203->localhost:2379 (ESTABLISHED)
........
 
[root@node01 ~]# etcdctl set testdir/testkey0 0
0
[root@node01 ~]# etcdctl get testdir/testkey0
0
[root@node01 ~]# etcdctl -C http://etcd:4001 cluster-health
member 8e9e05c52164694d is healthy: got healthy result from http://node01:2379
cluster is healthy
[root@node01 ~]# etcdctl -C http://etcd:2379 cluster-health
member 8e9e05c52164694d is healthy: got healthy result from http://node01:2379
cluster is healthy

創建網絡

僅etcd主節點執行：
etcdctl mk /coreos.com/network/config '{ "Network": "10.10.0.0/16" }'

所有節點執行以下操作

wget https://github.com/coreos/flannel/releases/download/v0.10.0/flannel-v0.10.0-linux-amd64.tar.gz

tar -zxvf flannel-v0.10.0-linux-amd64.tar.gz

cp flanneld /usr/bin/ cp mk-docker-opts.sh /usr/bin/flannel/

vim /lib/systemd/system/flanneld.service

[Unit]
Description=Flanneld
Documentation=https://github.com/coreos/flannel
After=network.target
After=etcd.service
Before=docker.service
​
[Service]
User=root
EnvironmentFile=/etc/default/flanneld.conf
ExecStart=/usr/bin/flanneld \
-etcd-endpoints=${FLANNEL_ETCD_ENDPOINTS} \
-etcd-prefix=${FLANNEL_ETCD_PREFIX} \
$FLANNEL_OPTIONS
ExecStartPost=/usr/bin/flannel/mk-docker-opts.sh -k DOCKER_OPTS -d /run/flannel/docker
Restart=on-failure
Type=notify
LimitNOFILE=65536
​
[Install]
WantedBy=multi-user.target
RequiredBy=docker.service 

vim /etc/default/flanneld.conf

# Flanneld configuration options
​
# etcd url location. Point this to the server where etcd runs
​
FLANNEL_ETCD_ENDPOINTS="http://node01:2379"
​
# etcd config key. This is the configuration key that flannel queries
​
# For address range assignment
​
FLANNEL_ETCD_PREFIX="/coreos.com/network"
​
# Any additional options that you want to pass
​
# FLANNEL_OPTIONS=""

systemctl start flanneld

修改docker的systemd配置文件

$ vim /lib/systemd/system/docker.service

[Service]
Type=notify
EnvironmentFile=/run/flannel/docker
ExecStart=/usr/bin/dockerd -H fd:// $DOCKER_OPTS

重啓docker服務。

$ sudo systemctl daemon-reload

$ sudo systemctl restart docker

查看docker是否有了flannel的網絡。

$ sudo ps -ef | grep docker

root 11285 1 1 15:14 ? 00:00:01 /usr/bin/dockerd -H fd:// --bip=192.168.4.129/26 --ip-masq=true --mtu=1472