N76E003 驅動 ST7567 （SPI串口）

原創 XS30 2019-07-30 15:58

需要工程文件包可在這裏下載
先液晶屏參數
在這裏插入圖片描述

再看DXP原理圖（+Bat爲3.3V），LCD_Rst爲硬件復位引腳，如不需要可直接設爲高電平。BG_V/BG_G爲背光端，單片機控制背光可使用三極管。
在這裏插入圖片描述

初始化流程
在這裏插入圖片描述

對比度調節
在這裏插入圖片描述

COG.c文件代碼

#include "N76E003.h"
#include "SFR_Macro.h"
#include "Function_define.h"
#include "Common.h"
#include "Delay.h"
#include "intrins.h"
#include "COG.h"
#include "LCDFont.h"

#define Page0    0xb0  //第0頁地址
#define Page_max   0xb8  //最大頁地址,第8頁
#define Column_h   0x10  //列地址(高位)
#define Column_l   0x00  //列地址(低位)

//--------------------------------------------------------- 4線SPI接口 															  
sbit    RSTB	=P3^0;
sbit    SDO   =P1^4;//串行數據
sbit		SCLK	=P1^3;//串行時鐘
sbit    CS0  	=P1^5;//片選信號
sbit    CD    =P1^0;//命令/數據切換
//--------------------------------------------------------------------------




//清屏函數
void clear_screen(uchar xx)
{
uchar i,j;
for(i=0;i<8;i++)
	{
		CS0=0;
		Write_ST7567_COM(0xb0+i);	 //SET PAGE 0---8
	  Write_ST7567_COM(0x10);	 //SET COLUMN MSB
		Write_ST7567_COM(0x00);	  //SET CLUMN LSB
		for(j=0;j<128;j++)
		{
			Write_ST7567_DATA(xx);
		}
	 }
}



//顯示圖片函數
void Display_pic1()
{
	uint i,j,adressd=0;

	for(i=0;i<8;i++)
	{
		CS0=0;
		Write_ST7567_COM(0xb0+i);
	  Write_ST7567_COM(0x10);
		Write_ST7567_COM(0x00);
		for(j=0;j<96;j++)
		{
			Write_ST7567_DATA(graphic1[adressd]);
			adressd++;
		}
	}
} 

//寫命令函數
void Write_ST7567_COM(uchar COMDADA_4SPI)
{
	uchar bit8;
	CD=0;
	CS0=0;
	for(bit8=0;bit8<8;bit8++)
	{
		SCLK=0;
		if((COMDADA_4SPI&0x80)==0x80)
		SDO=1;
		else		
		SDO=0;
//		SCL=0;
		SCLK=1;
		COMDADA_4SPI=(COMDADA_4SPI<<1);

	}
  //  CS1=1;
			
}

//寫數據函數
void Write_ST7567_DATA(uchar DATA_4SPI)
{   
	uchar bit8;
	CD=1;
	CS0=0;				

	for(bit8=0;bit8<8;bit8++)
	{
		SCLK=0;
		if((DATA_4SPI&0x80)==0x80)
		SDO=1;
		else
		SDO=0;
		SCLK=1;
		DATA_4SPI=(DATA_4SPI<<1);

	}
//	CS1=1;
}

		
//軟件延時（不怎麼準
void Delay_ms(unsigned long value)
{
	uint i,j;
    for (i=0;i<value;i++)
		for (j=0;j<500;j++);
}



//硬件復位函數
void HDReset()
{
	RSTB=0;
	Delay_ms(2);
	RSTB=1;
	Delay_ms(4);
}




///****************************************************************************/
////函數名稱:WRITE_STRING(uchar plat,uchar column,uchar xs,uchar chr, uchar c)
////函數功能:顯示字符
////輸入參數:plat      行地址
////輸入參數:column    列地址
////輸入參數:chr    顯示數值
////輸入參數:fs   顯示方式（0，反顯，否則正常顯示）
////返 回 值:無
///****************************************************************************/
void WRITE_STRING(uchar plat, uchar column, uchar chr, uchar fs)
{
	uchar page,page1,col,col_h,col_l;
	uchar i,a,j=0;
	page1= plat*2;
	page=page1+Page0;
	col=column*8;
	col_h=((col>>4)|0xf0)&0x1f;
	col_l=col&0x0f;
	
	chr=chr-' ';//得到偏移後的值	
	for(a = 0; a <2; a++)
	{
		Write_ST7567_COM(col_h);
		Write_ST7567_COM(col_l);
		Write_ST7567_COM(page+a);
  	for(i = 0;  i <8; i ++ )
	 	{
				if(fs == 0){Write_ST7567_DATA(s0[chr][j++]);}
				if(fs == 1){Write_ST7567_DATA(~(s0[chr][j++]));}
		}
	}	 
}


///****************************************************************************/
////函數名稱:Disp_Nub8X16(uchar Row,uchar Col,uchar Number,uchar fs)
////函數功能:將數據顯示出來
////輸入參數:low       行地址
////輸入參數:Col      列地址
////輸入參數:Number    顯示數值
////輸入參數:fs   顯示方式（0，反顯，否則正常顯示）
////返 回 值:無
///****************************************************************************/
void Disp_Nub8X16(uchar Row,uchar Col,uchar Number,uchar fs)
{
	uchar page,page1,col,col_h,col_l,chr;
	uchar i,a,j=0;
	page1=Row*2;
	page=page1+Page0;
	col=Col*8;
	col_h=((col>>4)|0xf0)&0x1f;
	col_l=col&0x0f;
	
	if(Number<11)//十進制數據
	{
		chr=Number+16;
	}
		
	else//十六進制數據
	{
		chr=Number-32;
	}

	for(a = 0; a <2; a++)
	{
		Write_ST7567_COM(col_h);
		Write_ST7567_COM(col_l);
		Write_ST7567_COM(page+a);
  	for(i = 0;  i <8; i ++ )
	 	{
				if(fs == 0){Write_ST7567_DATA(s0[chr][j++]);}
				if(fs == 1){Write_ST7567_DATA(~(s0[chr][j++]));}
		}
	}	
}






//清屏函數
void Lcd12864_ClearScreen(void)
{
	uchar i, j;

	for(i=0; i<8; i++)
	{
		Write_ST7567_COM(0xB0+i); 
		Write_ST7567_COM(0x10); 
		Write_ST7567_COM(0x00);							   
		for(j=0; j<128; j++)
		{
			Write_ST7567_DATA(0x00);  
		}
	}
}


///****************************************************************************/
////函數名稱:Init_ST7567()
////函數功能:初始化液晶屏
////輸入參數:無
////返 回 值:無
////		TIPS:命令符見ST7567數據手冊
///****************************************************************************/
void Init_ST7567()
{
	HDReset();//硬復位
	Timer3_Delay100ms(1);

       Write_ST7567_COM(0xe2);//軟復位

       Write_ST7567_COM(0xaf);//0xaf顯示器開
       Write_ST7567_COM(0x2f);//0x2f升壓電路,電壓管理電路,
	   	   
       Write_ST7567_COM(0x25);//0x20-0x27爲V5電壓內部電阻調整設置 

       Write_ST7567_COM(0x81);// SET EV 調對比度
       Write_ST7567_COM(0x18);//0x01-0x3f電量寄存器設置模式

       Write_ST7567_COM(0xa0);//0xa0爲Segment正向,0xa1 爲Segment反向
	   	   
       Write_ST7567_COM(0xc8);//0xc0正向掃描,0xc8反射掃描

       Write_ST7567_COM(0xa6);//0xa6正向顯示,0xa7反向顯示
       Write_ST7567_COM(0xa4);//0xa4正常顯示,0xa5全屏點亮

       Write_ST7567_COM(0xf8);//背壓比設置
       Write_ST7567_COM(0x00);//00--10
			 Lcd12864_ClearScreen();//清屏
}

COG.h文件代碼

#ifndef __COG_H
#define __COG_H	

#define uint unsigned int
#define uchar unsigned  char


void Init_ST7567();
void Write_ST7567_COM(uchar COMDADA_4SPI);
void Write_ST7567_DATA(uchar DATA_4SPI);
void HDReset();
void clear_screen(uchar xx);
void Display_pic1();
void Delay_ms(unsigned long value);
//plat x座標； column y座標；p數組位置；c是否反白顯示
void WRITE_STRING(uchar plat, uchar column, uchar chr, uchar fs);
void Lcd12864_ClearScreen(void);
void Disp_Nub8X16(uchar Row,uchar Col,uchar Number,uchar fs);
#endif

取模方式
在這裏插入圖片描述
LCDFont.h文件代碼

#ifndef __LCDFONT_H
#define __LCDFONT_H 

#define uint unsigned int
#define uchar unsigned  char


//圖像數組
uchar code graphic1[]={0};



uchar code s0[][16]=
{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*" ",0*/
0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,/*"!",1*/
0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*""",2*/
0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,/*"#",3*/
0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,/*"$",4*/
0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,/*"%",5*/
0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,/*"&",6*/
0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*"'",7*/
0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,/*"(",8*/
0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,/*")",9*/
0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,/*"*",10*/
0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,/*"+",11*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,/*",",12*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,/*"-",13*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,/*".",14*/
0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,/*"/",15*/
0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,/*"0",16*/
0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,/*"1",17*/
0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,/*"2",18*/
0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,/*"3",19*/
0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,/*"4",20*/
0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,/*"5",21*/
0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,/*"6",22*/
0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,/*"7",23*/
0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,/*"8",24*/
0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,/*"9",25*/
0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,/*":",26*/
0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,/*";",27*/
0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,/*"<",28*/
0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,/*"=",29*/
0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,/*">",30*/
0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,/*"?",31*/
0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,/*"@",32*/
0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,/*"A",33*/
0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,/*"B",34*/
0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,/*"C",35*/
0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,/*"D",36*/
0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,/*"E",37*/
0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,/*"F",38*/
0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,/*"G",39*/
0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,/*"H",40*/
0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,/*"I",41*/
0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,/*"J",42*/
0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,/*"K",43*/
0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,/*"L",44*/
0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,/*"M",45*/
0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,/*"N",46*/
0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,/*"O",47*/
0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,/*"P",48*/
0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,/*"Q",49*/
0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,/*"R",50*/
0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,/*"S",51*/
0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,/*"T",52*/
0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,/*"U",53*/
0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,/*"V",54*/
0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,/*"W",55*/
0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,/*"X",56*/
0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,/*"Y",57*/
0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,/*"Z",58*/
0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,/*"[",59*/
0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,/*"\",60*/
0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,/*"]",61*/
0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*"^",62*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,/*"_",63*/
0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*"`",64*/
0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,/*"a",65*/
0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,/*"b",66*/
0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,/*"c",67*/
0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,/*"d",68*/
0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,/*"e",69*/
0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,/*"f",70*/
0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,/*"g",71*/
0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,/*"h",72*/
0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,/*"i",73*/
0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,/*"g",74*/
0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,/*"k",75*/
0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,/*"l",76*/
0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,/*"m",77*/
0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,/*"n",78*/
0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,/*"o",79*/
0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,/*"p",80*/
0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,/*"q",81*/
0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,/*"r",82*/
0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,/*"s",83*/
0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,/*"t",84*/
0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,/*"u",85*/
0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,/*"v",86*/
0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,/*"w",87*/
0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,/*"x",88*/
0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,/*"y",89*/
0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,/*"z",90*/
0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,/*"{",91*/
0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,/*"|",92*/
0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,/*"}",93*/
0x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*"~",94*/
};


#endif
發表評論
所有評論
還沒有人評論，想成為第一個評論的人麼? 請在上方評論欄輸入並且點擊發布.
相關文章

N76E003之模擬EEPROM

在使用STM32時，常可以將內部1flash的一部分劃作數據儲存區（EEPROM），用於掉電後的數據保存。而N76E003單片機也可實現類似的功能。 下圖爲N76E003的內存分配圖，我們可以從下圖中看到APROM使用的地址範

XS30 2020-06-14 19:49:19

N76E003之ADC採集NTC溫度

RG選用10k 1%精度NTC熱敏電阻，R1使用10k 1%精度貼片電阻，電路如下圖1所示，使用N76E003單片機AIN4通道進行採樣，使用帶隙電壓進行修正。 分壓計算公式：Urg=[RG/(RG+R1)]*Vdd *C

XS30 2020-06-14 19:49:19

N76E003 夏普GP2Y1010 PM2.5

首先來看傳感器內部結構與單片機的連接圖。由下圖可知，實際上使用的I/O就是3、5腳。其中3腳爲PWM驅動LED閃爍頻率的引腳，在下文中可以看到時序。而5腳Vo則是傳感器檢測到的灰塵，而輸出的電壓值。在下文的程序中，將使用N76E0

XS30 2020-06-14 19:49:19

DIY邏輯充電器

XS30 2019-08-28 16:08:18

N76E003 之 RS485 通訊

XS30 2019-06-10 17:06:56

N76E003 避坑指南（持續更新）

XS30 2019-05-15 00:19:31

N76E003 IIC OLED

XS30 2019-05-13 01:00:58

N76E003 使用內部Flash區做數據儲存(EEPROM)

XS30 2019-04-14 16:48:15

Keil多次調用頭文件導致重定義報錯（L104）

XS30 2019-04-06 17:31:54

N76E003之ADC 多通道採樣

XS30 2019-03-29 15:52:12

N76E003 下載引腳 Dat、Clk、Rst做常規使用

XS30 2019-03-15 15:54:29

N76E003 驅動 UC1705並口屏（8080）

XS30 2019-03-12 15:09:06

N76E003 驅動 串口屏

XS30 2019-02-26 13:05:55

DIY小型氣象站（單電池供電）——持續更新

XS30 2019-02-07 02:08:22

N76E003 超聲波測距

XS30 2019-02-03 03:36:14