20190718 本来是要做一个 php 的验证码，结果发现在我的 macbook 上死活不出图片，但是在windows 上是可以的！断定问题出在环境上！
macOS Mojave 10.14.5
WEB： 自带的 apache
PHP：自带的 php 7.1
经过一大圈折腾，最终的结果是：重装了 apache，重装了 php7.2，原因在于苹果10.14之后，内置的 apache，不再加载那些第三方组件库！
原文如下
Detected macOS Mojave 10.14. There are serious issues with it, due to the original apache not loading
foreign libraries anymore. PHP within apache will most certainly not work anymore if you proceed!
The cli version still will.
See this issue at https://github.com/liip/php-osx/issues/249 for details and discussion
...
1、百度找资料
https://github.com/liip/php-osx/issues/249
上这里找办法！
这里再抄写一次最终的解决步骤
-
macOS comes with pre-installed apache, following are the commands to stop it and prevent from autostart on boot:
$ sudo apachectl stop
$ sudo launchctl unload /System/Library/LaunchDaemons/org.apache.httpd.plist 2>/dev/null -
Install apache through homebrew
$ brew install httpd -
Check apache installation through the following command and the output should be /usr/local/bin/apachectl
$ which apachectl -
Start apache through the following command
$ sudo apachectl -k start -
Set apache to startup on bootload
$ sudo brew services start httpd -
Re-install php from https://php-osx.liip.ch link.
2、我的错误
我是在先 brew install php 7.2 之后，才看到的以上网址，所以，以上 step 6 我来回浪费了一些时间！因为我在 step 6 最后都是失败的！
https://php-osx.liip.ch/
这里列举了各个 php 版本的重装 php 方式，我尝试了 7.2 和 7.1
$ curl -s https://php-osx.liip.ch/install.sh | bash -s 7.2
****
[WARNING]
Detected macOS Mojave 10.14. There are serious issues with it, due to the original apache not loading
foreign libraries anymore. PHP within apache will most certainly not work anymore if you proceed!
The cli version still will.
See this issue at https://github.com/liip/php-osx/issues/249 for details and discussion
****
Restart this script with
curl -s https://php-osx.liip.ch/install.sh | bash -s force 7.2
to really install it
****
$ curl -s https://php-osx.liip.ch/install.sh | bash -s force 7.2
经过漫长的下载、等待之后
错误如下：
当时没有抄录下来，大概记得是
did or could not .....
只好冷静下来，一步一步的设置！
想回头，回头的繁琐和继续前行的难度，工作量都不小！
（抱歉！我没有使用 TM 的习惯！）
3、设置 apache
-
新的 apache 在哪里？
$ which apachectl/usr/local/bin/apachectl之前记录过，旧的 apache 在
/usr/sbin/httpd -
测试一下
打开浏览器，输入 127.0.0.1:8080
It works! -
配置文件在哪里
安装的时候没有注意，一时晕乎！后来在 ps 命令下看到了$ ps -ef |grep httpd
0 84 1 0 5:44下午 ?? 0:00.13 /usr/local/opt/httpd/bin/httpd -D FOREGROUND 70 235 84 0 5:44下午 ?? 0:00.00 /usr/local/opt/httpd/bin/httpd -D FOREGROUND 70 236 84 0 5:44下午 ?? 0:00.00 /usr/local/opt/httpd/bin/httpd -D FOREGROUND 70 237 84 0 5:44下午 ?? 0:00.00 /usr/local/opt/httpd/bin/httpd -D FOREGROUND 70 238 84 0 5:44下午 ?? 0:00.00 /usr/local/opt/httpd/bin/httpd -D FOREGROUND 70 239 84 0 5:44下午 ?? 0:00.00 /usr/local/opt/httpd/bin/httpd -D FOREGROUND 70 618 84 0 5:53下午 ?? 0:00.00 /usr/local/opt/httpd/bin/httpd -D FOREGROUND 70 619 84 0 5:53下午 ?? 0:00.00 /usr/local/opt/httpd/bin/httpd -D FOREGROUND 70 620 84 0 5:53下午 ?? 0:00.00 /usr/local/opt/httpd/bin/httpd -D FOREGROUND 501 660 394 0 6:03下午 ttys000 0:00.00 grep httpd
$ cd /usr/local/opt/
$ ls -l
total 0
lrwxr-xr-x 1 dhbm admin 22 7 18 17:05 apache-httpd -> ../Cellar/httpd/2.4.34
lrwxr-xr-x 1 dhbm admin 22 7 18 17:05 apache2 -> ../Cellar/httpd/2.4.34
...
lrwxr-xr-t 1 dhbm admin 22 7 18 17:05 httpd -> ../Cellar/httpd/2.4.34
...
apache2 和 apache-httpd 找了，都不是！
只有找这个 httpd
$ cd /usr/local/etc/httpd/
$ ls -l
total 200
-rw-r--r-- 1 dhbm admin 0 7 18 21:09 Caveats
drwxr-xr-x 14 dhbm admin 448 7 18 17:05 extra
-rw-r--r-- 1 dhbm admin 21958 7 18 21:24 httpd.conf
-rw-r--r-- 1 dhbm admin 13077 7 18 17:05 magic
-rw-r--r-- 1 dhbm admin 60847 7 18 17:05 mime.types
drwxr-xr-x 4 dhbm admin 128 7 18 17:05 original
看文件清淡和创建时间，应该这就是新的 apache 配置的地方了！
$ vim httpd.conf
Listen 8080 改成 Listen 80
sudo apachectl -k restart
再次测试 127.0.0.1，还是可以显示 It works!
查找 DocumentRoot，看到了现在的 root 位置！
DocumentRoot "/usr/local/var/www"
<Directory "/usr/local/var/www">
cd /usr/local/var/www
建立一个 info.php，然后
http://127.0.0.1/info.php
结果原文显示了！说明 php 支持没有安装！
$ cat info.php
<?php
phpinfo();
?>
3、 安装 php 7.2
-
$ brew search php
**记录很重要，一定先保存下来，后续问题需要查看==> Formulae brew-php-switcher php php-code-sniffer php-cs-fixer [email protected] [email protected] [email protected] ✔ phplint phpmyadmin phpunit homebrew/linuxbrew-core/brew-php-switcher homebrew/linuxbrew-core/php homebrew/linuxbrew-core/php-code-sniffer homebrew/linuxbrew-core/php-cs-fixer homebrew/linuxbrew-core/[email protected] homebrew/linuxbrew-core/[email protected] homebrew/linuxbrew-core/[email protected] ==> Casks eclipse-php netbeans-php phpstorm -
$ brew install php72
pdating Homebrew... Fast-forwarded master to origin/master. ==> Auto-updated Homebrew! Updated 1 tap (homebrew/cask). No changes to formulae. ==> Installing dependencies for php: apr, openssl, apr-util, argon2, aspell, autoconf, freetds, libffi, pcre, glib, gmp, icu4c, libpq, libsodium, libzip, unixodbc ==> Installing php dependency: apr ==> Downloading https://mirrors.ustc.edu.cn/homebrew-bottles/bottles/apr-1.6.3.h ######################################################################## 100.0% ==> Pouring apr-1.6.3.high_sierra.bottle.tar.gz ==> Caveats This formula is keg-only, which means it was not symlinked into /usr/local, because Apple's CLT package contains apr. If you need to have this software first in your PATH run: echo 'export PATH="/usr/local/opt/apr/bin:$PATH"' >> ~/.bash_profile ==> Summary 🍺 /usr/local/Cellar/apr/1.6.3: 60 files, 1.3MB ==> Installing php dependency: openssl ==> Downloading https://mirrors.ustc.edu.cn/homebrew-bottles/bottles/openssl-1.0 ######################################################################## 100.0% ==> Pouring openssl-1.0.2o_2.high_sierra.bottle.tar.gz ==> Caveats A CA file has been bootstrapped using certificates from the SystemRoots keychain. To add additional certificates (e.g. the certificates added in the System keychain), place .pem files in /usr/local/etc/openssl/certs and run /usr/local/opt/openssl/bin/c_rehash This formula is keg-only, which means it was not symlinked into /usr/local, because Apple has deprecated use of OpenSSL in favor of its own TLS and crypto libraries. If you need to have this software first in your PATH run: echo 'export PATH="/usr/local/opt/openssl/bin:$PATH"' >> ~/.bash_profile For compilers to find this software you may need to set: LDFLAGS: -L/usr/local/opt/openssl/lib CPPFLAGS: -I/usr/local/opt/openssl/include ==> Summary 🍺 /usr/local/Cellar/openssl/1.0.2o_2: 1,792 files, 12.3MB ==> Installing php dependency: apr-util ==> Downloading https://mirrors.ustc.edu.cn/homebrew-bottles/bottles/apr-util-1. ######################################################################## 100.0% ==> Pouring apr-util-1.6.1_1.high_sierra.bottle.tar.gz ==> Caveats This formula is keg-only, which means it was not symlinked into /usr/local, because Apple's CLT package contains apr. If you need to have this software first in your PATH run: echo 'export PATH="/usr/local/opt/apr-util/bin:$PATH"' >> ~/.bash_profile ==> Summary 🍺 /usr/local/Cellar/apr-util/1.6.1_1: 54 files, 778.2KB ==> Installing php dependency: argon2 ==> Downloading https://mirrors.ustc.edu.cn/homebrew-bottles/bottles/argon2-2017 ######################################################################## 100.0% ==> Pouring argon2-20171227.high_sierra.bottle.tar.gz 🍺 /usr/local/Cellar/argon2/20171227: 11 files, 590KB ==> Installing php dependency: aspell ==> Downloading https://mirrors.ustc.edu.cn/homebrew-bottles/bottles/aspell-0.60 ######################################################################## 100.0% ==> Pouring aspell-0.60.6.1_1.high_sierra.bottle.tar.gz ==> Caveats Installation of the 'is' (Icelandic) and 'nb' (Norwegian) dictionaries is currently broken. They can be installed manually. See: https://github.com/Homebrew/homebrew-core/issues/28074 ==> Summary 🍺 /usr/local/Cellar/aspell/0.60.6.1_1: 267 files, 35.6MB ==> Installing php dependency: autoconf ==> Downloading https://mirrors.ustc.edu.cn/homebrew-bottles/bottles/autoconf-2. ######################################################################## 100.0% ==> Pouring autoconf-2.69.high_sierra.bottle.4.tar.gz Error: The `brew link` step did not complete successfully The formula built, but is not symlinked into /usr/local Could not symlink bin/autoconf Target /usr/local/bin/autoconf already exists. You may want to remove it: rm '/usr/local/bin/autoconf' To force the link and overwrite all conflicting files: brew link --overwrite autoconf To list all files that would be deleted: brew link --overwrite --dry-run autoconf Possible conflicting files are: /usr/local/bin/autoconf /usr/local/bin/autoheader /usr/local/bin/autom4te /usr/local/bin/autoreconf /usr/local/bin/autoscan /usr/local/bin/autoupdate /usr/local/bin/ifnames /usr/local/share/autoconf/Autom4te/C4che.pm /usr/local/share/autoconf/Autom4te/ChannelDefs.pm /usr/local/share/autoconf/Autom4te/Channels.pm /usr/local/share/autoconf/Autom4te/Configure_ac.pm /usr/local/share/autoconf/Autom4te/FileUtils.pm /usr/local/share/autoconf/Autom4te/General.pm /usr/local/share/autoconf/Autom4te/Getopt.pm /usr/local/share/autoconf/Autom4te/Request.pm /usr/local/share/autoconf/Autom4te/XFile.pm /usr/local/share/autoconf/INSTALL /usr/local/share/autoconf/autoconf/autoconf.m4 /usr/local/share/autoconf/autoconf/autoconf.m4f /usr/local/share/autoconf/autoconf/autoheader.m4 /usr/local/share/autoconf/autoconf/autoscan.m4 /usr/local/share/autoconf/autoconf/autotest.m4 /usr/local/share/autoconf/autoconf/autoupdate.m4 /usr/local/share/autoconf/autoconf/c.m4 /usr/local/share/autoconf/autoconf/erlang.m4 /usr/local/share/autoconf/autoconf/fortran.m4 /usr/local/share/autoconf/autoconf/functions.m4 /usr/local/share/autoconf/autoconf/general.m4 /usr/local/share/autoconf/autoconf/go.m4 /usr/local/share/autoconf/autoconf/headers.m4 /usr/local/share/autoconf/autoconf/lang.m4 /usr/local/share/autoconf/autoconf/libs.m4 /usr/local/share/autoconf/autoconf/oldnames.m4 /usr/local/share/autoconf/autoconf/programs.m4 /usr/local/share/autoconf/autoconf/specific.m4 /usr/local/share/autoconf/autoconf/status.m4 /usr/local/share/autoconf/autoconf/types.m4 /usr/local/share/autoconf/autom4te.cfg /usr/local/share/autoconf/autoscan/autoscan.list /usr/local/share/autoconf/autotest/autotest.m4 /usr/local/share/autoconf/autotest/autotest.m4f /usr/local/share/autoconf/autotest/general.m4 /usr/local/share/autoconf/autotest/specific.m4 /usr/local/share/autoconf/m4sugar/foreach.m4 /usr/local/share/autoconf/m4sugar/m4sh.m4 /usr/local/share/autoconf/m4sugar/m4sh.m4f /usr/local/share/autoconf/m4sugar/m4sugar.m4 /usr/local/share/autoconf/m4sugar/m4sugar.m4f /usr/local/share/autoconf/m4sugar/version.m4 /usr/local/share/info/autoconf.info /usr/local/share/man/man1/autoconf.1 /usr/local/share/man/man1/autoheader.1 /usr/local/share/man/man1/autom4te.1 /usr/local/share/man/man1/autoreconf.1 /usr/local/share/man/man1/autoscan.1 /usr/local/share/man/man1/autoupdate.1 /usr/local/share/man/man1/config.guess.1 /usr/local/share/man/man1/config.sub.1 /usr/local/share/man/man1/ifnames.1 ==> Caveats Emacs Lisp files have been installed to: /usr/local/share/emacs/site-lisp/autoconf ==> Summary 🍺 /usr/local/Cellar/autoconf/2.69: 71 files, 3.0MB ==> Installing php dependency: freetds ==> Downloading https://mirrors.ustc.edu.cn/homebrew-bottles/bottles/freetds-1.0 ######################################################################## 100.0% ==> Pouring freetds-1.00.94.high_sierra.bottle.tar.gz 🍺 /usr/local/Cellar/freetds/1.00.94: 2,094 files, 11.9MB ==> Installing php dependency: libffi ==> Downloading https://mirrors.ustc.edu.cn/homebrew-bottles/bottles/libffi-3.2. ######################################################################## 100.0% ==> Pouring libffi-3.2.1.high_sierra.bottle.tar.gz ==> Caveats This formula is keg-only, which means it was not symlinked into /usr/local, because some formulae require a newer version of libffi. For compilers to find this software you may need to set: LDFLAGS: -L/usr/local/opt/libffi/lib ==> Summary 🍺 /usr/local/Cellar/libffi/3.2.1: 16 files, 297.0KB ==> Installing php dependency: pcre ==> Downloading https://mirrors.ustc.edu.cn/homebrew-bottles/bottles/pcre-8.42.h ######################################################################## 100.0% ==> Pouring pcre-8.42.high_sierra.bottle.tar.gz 🍺 /usr/local/Cellar/pcre/8.42: 204 files, 5.3MB ==> Installing php dependency: glib ==> Downloading https://mirrors.ustc.edu.cn/homebrew-bottles/bottles/glib-2.56.1 ######################################################################## 100.0% ==> Pouring glib-2.56.1.high_sierra.bottle.tar.gz 🍺 /usr/local/Cellar/glib/2.56.1: 430 files, 23.7MB ==> Installing php dependency: gmp ==> Downloading https://mirrors.ustc.edu.cn/homebrew-bottles/bottles/gmp-6.1.2_2 ######################################################################## 100.0% ==> Pouring gmp-6.1.2_2.high_sierra.bottle.tar.gz 🍺 /usr/local/Cellar/gmp/6.1.2_2: 18 files, 3.1MB ==> Installing php dependency: icu4c ==> Downloading https://mirrors.ustc.edu.cn/homebrew-bottles/bottles/icu4c-62.1. ######################################################################## 100.0% ==> Pouring icu4c-62.1.high_sierra.bottle.tar.gz ==> Caveats This formula is keg-only, which means it was not symlinked into /usr/local, because macOS provides libicucore.dylib (but nothing else). If you need to have this software first in your PATH run: echo 'export PATH="/usr/local/opt/icu4c/bin:$PATH"' >> ~/.bash_profile echo 'export PATH="/usr/local/opt/icu4c/sbin:$PATH"' >> ~/.bash_profile For compilers to find this software you may need to set: LDFLAGS: -L/usr/local/opt/icu4c/lib CPPFLAGS: -I/usr/local/opt/icu4c/include ==> Summary 🍺 /usr/local/Cellar/icu4c/62.1: 250 files, 67.3MB ==> Installing php dependency: libpq ==> Downloading https://mirrors.ustc.edu.cn/homebrew-bottles/bottles/libpq-10.4. ######################################################################## 100.0% ==> Pouring libpq-10.4.high_sierra.bottle.tar.gz ==> Caveats This formula is keg-only, which means it was not symlinked into /usr/local, because conflicts with postgres formula. If you need to have this software first in your PATH run: echo 'export PATH="/usr/local/opt/libpq/bin:$PATH"' >> ~/.bash_profile For compilers to find this software you may need to set: LDFLAGS: -L/usr/local/opt/libpq/lib CPPFLAGS: -I/usr/local/opt/libpq/include ==> Summary 🍺 /usr/local/Cellar/libpq/10.4: 2,430 files, 26.9MB ==> Installing php dependency: libsodium ==> Downloading https://mirrors.ustc.edu.cn/homebrew-bottles/bottles/libsodium-1 ######################################################################## 100.0% ==> Pouring libsodium-1.0.16.high_sierra.bottle.tar.gz 🍺 /usr/local/Cellar/libsodium/1.0.16: 71 files, 945.1KB ==> Installing php dependency: libzip ==> Downloading https://mirrors.ustc.edu.cn/homebrew-bottles/bottles/libzip-1.5. ######################################################################## 100.0% ==> Pouring libzip-1.5.1.high_sierra.bottle.tar.gz 🍺 /usr/local/Cellar/libzip/1.5.1: 134 files, 577KB ==> Installing php dependency: unixodbc ==> Downloading https://mirrors.ustc.edu.cn/homebrew-bottles/bottles/unixodbc-2. ######################################################################## 100.0% ==> Pouring unixodbc-2.3.6.high_sierra.bottle.tar.gz 🍺 /usr/local/Cellar/unixodbc/2.3.6: 46 files, 1.8MB ==> Installing php ==> Downloading https://mirrors.ustc.edu.cn/homebrew-bottles/bottles/php-7.2.8.h ######################################################################## 100.0% ==> Pouring php-7.2.8.high_sierra.bottle.tar.gz Error: The `brew link` step did not complete successfully The formula built, but is not symlinked into /usr/local Could not symlink sbin/php-fpm /usr/local/sbin is not writable. You can try again using: brew link php ==> /usr/local/Cellar/php/7.2.8/bin/pear config-set php_ini /usr/local/etc/php/7 ==> /usr/local/Cellar/php/7.2.8/bin/pear config-set php_dir /usr/local/share/pea ==> /usr/local/Cellar/php/7.2.8/bin/pear config-set doc_dir /usr/local/share/pea ==> /usr/local/Cellar/php/7.2.8/bin/pear config-set ext_dir /usr/local/lib/php/p ==> /usr/local/Cellar/php/7.2.8/bin/pear config-set bin_dir /usr/local/opt/php/b ==> /usr/local/Cellar/php/7.2.8/bin/pear config-set data_dir /usr/local/share/pe ==> /usr/local/Cellar/php/7.2.8/bin/pear config-set cfg_dir /usr/local/share/pea ==> /usr/local/Cellar/php/7.2.8/bin/pear config-set www_dir /usr/local/share/pea ==> /usr/local/Cellar/php/7.2.8/bin/pear config-set man_dir /usr/local/share/man ==> /usr/local/Cellar/php/7.2.8/bin/pear config-set test_dir /usr/local/share/pe ==> /usr/local/Cellar/php/7.2.8/bin/pear config-set php_bin /usr/local/opt/php/b ==> /usr/local/Cellar/php/7.2.8/bin/pear update-channels ==> Caveats To enable PHP in Apache add the following to httpd.conf and restart Apache: LoadModule php7_module /usr/local/opt/php/lib/httpd/modules/libphp7.so <FilesMatch \.php$> SetHandler application/x-httpd-php </FilesMatch> Finally, check DirectoryIndex includes index.php DirectoryIndex index.php index.html The php.ini and php-fpm.ini file can be found in: /usr/local/etc/php/7.2/ To have launchd start php now and restart at login: brew services start php Or, if you don't want/need a background service you can just run: php-fpm ==> Summary 🍺 /usr/local/Cellar/php/7.2.8: 515 files, 79.1MB ==> Caveats ==> apr This formula is keg-only, which means it was not symlinked into /usr/local, because Apple's CLT package contains apr. If you need to have this software first in your PATH run: echo 'export PATH="/usr/local/opt/apr/bin:$PATH"' >> ~/.bash_profile ==> openssl A CA file has been bootstrapped using certificates from the SystemRoots keychain. To add additional certificates (e.g. the certificates added in the System keychain), place .pem files in /usr/local/etc/openssl/certs and run /usr/local/opt/openssl/bin/c_rehash This formula is keg-only, which means it was not symlinked into /usr/local, because Apple has deprecated use of OpenSSL in favor of its own TLS and crypto libraries. If you need to have this software first in your PATH run: echo 'export PATH="/usr/local/opt/openssl/bin:$PATH"' >> ~/.bash_profile For compilers to find this software you may need to set: LDFLAGS: -L/usr/local/opt/openssl/lib CPPFLAGS: -I/usr/local/opt/openssl/include ==> apr-util This formula is keg-only, which means it was not symlinked into /usr/local, because Apple's CLT package contains apr. If you need to have this software first in your PATH run: echo 'export PATH="/usr/local/opt/apr-util/bin:$PATH"' >> ~/.bash_profile ==> aspell Installation of the 'is' (Icelandic) and 'nb' (Norwegian) dictionaries is currently broken. They can be installed manually. See: https://github.com/Homebrew/homebrew-core/issues/28074 ==> autoconf Emacs Lisp files have been installed to: /usr/local/share/emacs/site-lisp/autoconf ==> libffi This formula is keg-only, which means it was not symlinked into /usr/local, because some formulae require a newer version of libffi. For compilers to find this software you may need to set: LDFLAGS: -L/usr/local/opt/libffi/lib ==> icu4c This formula is keg-only, which means it was not symlinked into /usr/local, because macOS provides libicucore.dylib (but nothing else). If you need to have this software first in your PATH run: echo 'export PATH="/usr/local/opt/icu4c/bin:$PATH"' >> ~/.bash_profile echo 'export PATH="/usr/local/opt/icu4c/sbin:$PATH"' >> ~/.bash_profile For compilers to find this software you may need to set: LDFLAGS: -L/usr/local/opt/icu4c/lib CPPFLAGS: -I/usr/local/opt/icu4c/include ==> libpq This formula is keg-only, which means it was not symlinked into /usr/local, because conflicts with postgres formula. If you need to have this software first in your PATH run: echo 'export PATH="/usr/local/opt/libpq/bin:$PATH"' >> ~/.bash_profile For compilers to find this software you may need to set: LDFLAGS: -L/usr/local/opt/libpq/lib CPPFLAGS: -I/usr/local/opt/libpq/include ==> php To enable PHP in Apache add the following to httpd.conf and restart Apache: LoadModule php7_module /usr/local/opt/php/lib/httpd/modules/libphp7.so <FilesMatch \.php$> SetHandler application/x-httpd-php </FilesMatch> Finally, check DirectoryIndex includes index.php DirectoryIndex index.php index.html The php.ini and php-fpm.ini file can be found in: /usr/local/etc/php/7.2/ To have launchd start php now and restart at login: brew services start php Or, if you don't want/need a background service you can just run: php-fpm
看到一些 conflicts 和 it was not symlinked into …，我心虚了！
没有启动新安装的 php！还想回头使用自带的 php 7.1！
** 重要的启动提示信息如下
To have launchd start php now and restart at login:
brew services start php
Or, if you don't want/need a background service you can just run:
php-fpm
==> Summary
🍺 /usr/local/Cellar/php/7.2.8: 515 files, 79.1MB
-
$ sudo vim /usr/local/etc/httpd/httpd.conf
从旧的目录下（ /etc/apache2 ）的 httpd.conf
找到 php 模块，cp 到新的 httpd.conf$ sudo apachectl restart
httpd: Syntax error on line 187 of /usr/local/etc/httpd/httpd.conf: Cannot load libexec/apache2/libphp7.so into server: dlopen(/usr/local/opt/httpd/libexec/apache2/libphp7.so, 10): image not found
*** 找不到 libphp7.so 了！
-
重新设置 php 7.2
以上保存的 php 安装记录中找到 php 设置部分==> php To enable PHP in Apache add the following to httpd.conf and restart Apache: LoadModule php7_module /usr/local/opt/php/lib/httpd/modules/libphp7.so <FilesMatch \.php$> SetHandler application/x-httpd-php </FilesMatch> Finally, check DirectoryIndex includes index.php DirectoryIndex index.php index.html The php.ini and php-fpm.ini file can be found in: /usr/local/etc/php/7.2/ To have launchd start php now and restart at login: brew services start php Or, if you don't want/need a background service you can just run: php-fpm
按照提示修改新的 httpd.conf
$ sudo apachectl restart
http://127.0.0.1/info.php
终于 ok 了！
4、后续问题
1. 中文目录乱码
2. 系统 php 版本和 web 的 php 版本不一样
3. brew link 失败
4. php 验证码不显示图片
文章太长了，下一个再继续！