交換機命令,路由器命令

 

http://10.10.90.1:8888

用戶名：quidway

 

交換機命令：

<AL3SW1>system-view                                //進入系統視圖

[AL3SW1]Ctrl+Z                                      //進入用戶視圖

[AL3SW1]sysname h3c                                 //交換機命名

[AL3SW1]display version                               //顯示交換機版本

[AL3SW1]display vlan 1                                //查看vlan設置

[AL3SW1]display interface                             //顯示接口信息

[AL3SW1]display current-configuration                   //顯示交換機當前運行的配置

[AL3SW1]inter e1/0/1                                  //進入以太網口視圖

[AL3SW1-e1/0/1]port link-type trunk                      //設置以太網口工作模式

[AL3SW1-e1/0/1]port trunk permit vlan 1                  //設置trunk允許的vlan

[AL3SW1]inter s5/0                                    //進入串口視圖

[AL3SW1-s5/0]ip address 10.10.90.17 255.255.255.0          //配置串口IP地址

[AL3SW1-s5/0]shutdown                                //關閉端口

[AL3SW1-s5/0]undo shutdown                           //激活端口

[AL3SW1]vlan 1                                      //創建vlan

[AL3SW1-vlan1]port e1/0/1 to e1/0/4                      //在vlan中添加端口

[AL3SW1-vlan1]quit                                   //退出

[AL3SW1]inter vlan 1                                  //進入vlan接口視圖

[AL3SW1-Vlan-inter1]ip address 10.10.90.7 255.255.255.0    //配置vlan的IP地址

<AL3SW1>reboot                                      //重啓交換機

 

 

路由器命令：

[ARouter1]display ip routing-table                        //顯示路由表信息

[ARouter1]inter gi0/0                                  //進入吉比特以太網口視圖

[ARouter1-gi0/0]ip address 192.168.1.1 24                 //配置吉比特以太網口IP地址

[ARouter1]inter s5/0                                   //進入串口視圖

[ARouter1-s5/0]ip address 10.10.90.2 30                    //配置串口IP地址

[ARouter1]rip                                        //設置動態路由

[ARouter1]rip work                                   //設置工作允許

[ARouter1-rip]network 10.10.90.6                       //設置交換路由的網絡

< ARouter1>reboot                                    //重啓路由器