Door Lock Configuration Report Command
The Door LockConfiguration Report command, version 1 is used to advertise the configurationparameters of a door lock device.
7 |
6 |
5 |
4 |
3 |
2 |
1 |
0 |
|
Command Class = COMMAND_CLASS_DOOR_LOCK |
||||||||
Command = DOOR_LOCK_CONFIGURATION_REPORT |
||||||||
Operation Type |
||||||||
Outside Door Handles Mode |
Inside Door Handles Mode |
|||||||
Lock Timeout Minutes |
||||||||
Lock Timeout Seconds |
Refer to Door LockConfiguration Set for details on fields.
Z-WAVE SM-600A 實例
出廠默認的配置 cmdClass = 0x62 cmd = 0x06 operationType = 2 Timed operation properties1 = 0 // 該值默認內外門把手都不disabled,但是實際上內外門把手都可以開門的;看起來和實際不符合。 lockTimeoutMinutes = 254 //默認這兩個值表明不支持timeout。有些奇怪 lockTimeoutSeconds = 254 //默認這兩個值表明不支持timeout。有些奇怪
通過DOOR_LOCK_CONFIGURATION_SET設置爲 Timed operation操作模式,並且內外門把手都可以操作,timeout時間爲1分鐘50秒後;獲得的配置值 看來這個鎖不支持相關參數的設置。 cmdClass = 0x62 cmd = 0x06 operationType = 2 properties1 = 0 lockTimeoutMinutes = 254 lockTimeoutSeconds = 254
|