Door Lock Configuration Report Command
The Door LockConfiguration Report command, version 1 is used to advertise the configurationparameters of a door lock device.
|
7 |
6 |
5 |
4 |
3 |
2 |
1 |
0 |
|
|
Command Class = COMMAND_CLASS_DOOR_LOCK |
||||||||
|
Command = DOOR_LOCK_CONFIGURATION_REPORT |
||||||||
|
Operation Type |
||||||||
|
Outside Door Handles Mode |
Inside Door Handles Mode |
|||||||
|
Lock Timeout Minutes |
||||||||
|
Lock Timeout Seconds |
||||||||
Refer to Door LockConfiguration Set for details on fields.
Z-WAVE SM-600A 实例
|
出厂默认的配置 cmdClass = 0x62 cmd = 0x06 operationType = 2 Timed operation properties1 = 0 // 该值默认内外门把手都不disabled，但是实际上内外门把手都可以开门的；看起来和实际不符合。 lockTimeoutMinutes = 254 //默认这两个值表明不支持timeout。有些奇怪 lockTimeoutSeconds = 254 //默认这两个值表明不支持timeout。有些奇怪
通过DOOR_LOCK_CONFIGURATION_SET设置为 Timed operation操作模式，并且内外门把手都可以操作，timeout时间为1分钟50秒后；获得的配置值 看来这个锁不支持相关参数的设置。 cmdClass = 0x62 cmd = 0x06 operationType = 2 properties1 = 0 lockTimeoutMinutes = 254 lockTimeoutSeconds = 254
|
