下面先羅列出string類的函數有哪一些,然後再羅列出函數的原型,最後到代碼的實現
標準C++中提供的string類得功能也是非常強大的,一般都能滿足我們開發項目時使用。現將具體用法的一部分羅列如下,只起一個拋磚引玉的作用吧,好了,廢話少說,直接進入正題吧!
要想使用標準C++中string類,必須要包含
#include <string>// 注意是<string>,不是<string.h>,帶.h的是C語言中的頭文件
using std::string;
using std::wstring;
或
using namespace std;
string類的大部分函數:
begin 得到指向字符串開頭的Iterator
end 得到指向字符串結尾的Iterator
rbegin 得到指向反向字符串開頭的Iterator
rend 得到指向反向字符串結尾的Iterator
size 得到字符串的大小
length 和size函數功能相同
max_size 字符串可能的最大大小
capacity 在不重新分配內存的情況下,字符串可能的大小
empty 判斷是否爲空
operator[] 取第幾個元素,相當於數組
c_str 取得C風格的const char* 字符串
data 取得字符串內容地址
operator= 賦值操作符
reserve 預留空間
swap 交換函數
insert 插入字符
append 追加字符
push_back 追加字符
operator+= += 操作符
erase 刪除字符串
clear 清空字符容器中所有內容
resize 重新分配空間
assign 和賦值操作符一樣
replace 替代
copy 字符串到空間
find 查找
rfind 反向查找
find_first_of 查找包含子串中的任何字符,返回第一個位置
find_first_not_of 查找不包含子串中的任何字符,返回第一個位置
find_last_of 查找包含子串中的任何字符,返回最後一個位置
find_last_not_of 查找不包含子串中的任何字符,返回最後一個位置
substr 得到字串
compare 比較字符串
operator+ 字符串鏈接
operator== 判斷是否相等
operator!= 判斷是否不等於
operator< 判斷是否小於
operator>> 從輸入流中讀入字符串
operator<< 字符串寫入輸出流
getline 從輸入流中讀入一行
string類的函數原型:
string類的構造函數:
string(const char *s); //用c字符串s初始化
string(int n,char c); //用n個字符c初始化
此外,string類還支持默認構造函數和複製構造函數,如string s1;string s2="hello";都是正確的寫法。當構造的string太長而無法表達時會拋出length_error異常 ;
string類的字符操作:
const char &operator[](int n)const;
const char &at(int n)const;
char &operator[](int n);
char &at(int n);
operator[]和at()均返回當前字符串中第n個字符的位置,但at函數提供範圍檢查,當越界時會拋出out_of_range異常,下標運算符[]不提供檢查訪問。
const char *data()const;//返回一個非null終止的c字符數組
const char *c_str()const;//返回一個以null終止的c字符串
int copy(char *s, int n, int pos = 0) const;//把當前串中以pos開始的n個字符拷貝到以s爲起始位置的字符數組中,返回實際拷貝的數目
string的特性描述:
int capacity()const; //返回當前容量(即string中不必增加內存即可存放的元素個數)
int max_size()const; //返回string對象中可存放的最大字符串的長度
int size()const; //返回當前字符串的大小
int length()const; //返回當前字符串的長度
bool empty()const; //當前字符串是否爲空
void resize(int len,char c);//把字符串當前大小置爲len,並用字符c填充不足的部分
string類的輸入輸出操作:
string類重載運算符operator>>用於輸入,同樣重載運算符operator<<用於輸出操作。
函數getline(istream &in,string &s);用於從輸入流in中讀取字符串到s中,以換行符'\n'分開。
string的賦值:
string &operator=(const string &s);//把字符串s賦給當前字符串
string &assign(const char *s);//用c類型字符串s賦值
string &assign(const char *s,int n);//用c字符串s開始的n個字符賦值
string &assign(const string &s);//把字符串s賦給當前字符串
string &assign(int n,char c);//用n個字符c賦值給當前字符串
string &assign(const string &s,int start,int n);//把字符串s中從start開始的n個字符賦給當前字符串
string &assign(const_iterator first,const_itertor last);//把first和last迭代器之間的部分賦給字符串
string的連接:
string &operator+=(const string &s);//把字符串s連接到當前字符串的結尾
string &append(const char *s); //把c類型字符串s連接到當前字符串結尾
string &append(const char *s,int n);//把c類型字符串s的前n個字符連接到當前字符串結尾
string &append(const string &s); //同operator+=()
string &append(const string &s,int pos,int n);//把字符串s中從pos開始的n個字符連接到當前字符串的結尾
string &append(int n,char c); //在當前字符串結尾添加n個字符c
string &append(const_iterator first,const_iterator last);//把迭代器first和last之間的部分連接到當前字符串的結尾
string的比較:
bool operator==(const string &s1,const string &s2)const;//比較兩個字符串是否相等
運算符">","<",">=","<=","!="均被重載用於字符串的比較;
int compare(const string &s) const;//比較當前字符串和s的大小
int compare(int pos, int n,const string &s)const;//比較當前字符串從pos開始的n個字符組成的字符串與s的大小
int compare(int pos, int n,const string &s,int pos2,int n2)const;//比較當前字符串從pos開始的n個字符組成的字符串與s中
//pos2開始的n2個字符組成的字符串的大小
int compare(const char *s) const;
int compare(int pos, int n,const char *s) const;
int compare(int pos, int n,const char *s, int pos2) const;
compare函數在>時返回1,<時返回-1,==時返回0
string的子串:
string substr(int pos = 0,int n = npos) const;//返回pos開始的n個字符組成的字符串
string的交換:
void swap(string &s2); //交換當前字符串與s2的值
string類的查找函數:
int find(char c, int pos = 0) const;//從pos開始查找字符c在當前字符串的位置
int find(const char *s, int pos = 0) const;//從pos開始查找字符串s在當前串中的位置
int find(const char *s, int pos, int n) const;//從pos開始查找字符串s中前n個字符在當前串中的位置
int find(const string &s, int pos = 0) const;//從pos開始查找字符串s在當前串中的位置
//查找成功時返回所在位置,失敗返回string::npos的值
int rfind(char c, int pos = npos) const;//從pos開始從後向前查找字符c在當前串中的位置
int rfind(const char *s, int pos = npos) const;
int rfind(const char *s, int pos = npos, int n) const;
int rfind(const string &s,int pos = npos) const;
//從pos開始從後向前查找字符串s中前n個字符組成的字符串在當前串中的位置,成功返回所在位置,失敗時返回string::npos的值
int find_first_of(char c, int pos = 0) const;//從pos開始查找字符c第一次出現的位置
int find_first_of(const char *s, int pos = 0) const;
int find_first_of(const char *s, int pos, int n) const;
int find_first_of(const string &s,int pos = 0) const;
//從pos開始查找當前串中第一個在s的前n個字符組成的數組裏的字符的位置。查找失敗返回string::npos
int find_first_not_of(char c, int pos = 0) const;
int find_first_not_of(const char *s, int pos = 0) const;
int find_first_not_of(const char *s, int pos,int n) const;
int find_first_not_of(const string &s,int pos = 0) const;
//從當前串中查找第一個不在串s中的字符出現的位置,失敗返回string::npos
int find_last_of(char c, int pos = npos) const;
int find_last_of(const char *s, int pos = npos) const;
int find_last_of(const char *s, int pos, int n = npos) const;
int find_last_of(const string &s,int pos = npos) const;
int find_last_not_of(char c, int pos = npos) const;
int find_last_not_of(const char *s, int pos = npos) const;
int find_last_not_of(const char *s, int pos, int n) const;
int find_last_not_of(const string &s,int pos = npos) const;
//find_last_of和find_last_not_of與find_first_of和find_first_not_of相似,只不過是從後向前查找
string類的替換函數:
string &replace(int p0, int n0,const char *s);//刪除從p0開始的n0個字符,然後在p0處插入串s
string &replace(int p0, int n0,const char *s, int n);//刪除p0開始的n0個字符,然後在p0處插入字符串s的前n個字符
string &replace(int p0, int n0,const string &s);//刪除從p0開始的n0個字符,然後在p0處插入串s
string &replace(int p0, int n0,const string &s, int pos, int n);//刪除p0開始的n0個字符,然後在p0處插入串s中從pos開始的n個字符
string &replace(int p0, int n0,int n, char c);//刪除p0開始的n0個字符,然後在p0處插入n個字符c
string &replace(iterator first0, iterator last0,const char *s);//把[first0,last0)之間的部分替換爲字符串s
string &replace(iterator first0, iterator last0,const char *s, int n);//把[first0,last0)之間的部分替換爲s的前n個字符
string &replace(iterator first0, iterator last0,const string &s);//把[first0,last0)之間的部分替換爲串s
string &replace(iterator first0, iterator last0,int n, char c);//把[first0,last0)之間的部分替換爲n個字符c
string &replace(iterator first0, iterator last0,const_iterator first, const_iterator last);//把[first0,last0)之間的部分替換成[first,last)之間的字符串
string類的插入函數:
string &insert(int p0, const char *s);
string &insert(int p0, const char *s, int n);
string &insert(int p0,const string &s);
string &insert(int p0,const string &s, int pos, int n);
//前4個函數在p0位置插入字符串s中pos開始的前n個字符
string &insert(int p0, int n, char c);//此函數在p0處插入n個字符c
iterator insert(iterator it, char c);//在it處插入字符c,返回插入後迭代器的位置
void insert(iterator it, const_iterator first, const_iterator last);//在it處插入[first,last)之間的字符
void insert(iterator it, int n, char c);//在it處插入n個字符c
string類的刪除函數
iterator erase(iterator first, iterator last);//刪除[first,last)之間的所有字符,返回刪除後迭代器的位置
iterator erase(iterator it);//刪除it指向的字符,返回刪除後迭代器的位置
string &erase(int pos = 0, int n = npos);//刪除pos開始的n個字符,返回修改後的字符串
string類的迭代器處理:
string類提供了向前和向後遍歷的迭代器iterator,迭代器提供了訪問各個字符的語法,類似於指針操作,迭代器不檢查範圍。
用string::iterator或string::const_iterator聲明迭代器變量,const_iterator不允許改變迭代的內容。常用迭代器函數有:
const_iterator begin()const;
iterator begin(); //返回string的起始位置
const_iterator end()const;
iterator end(); //返回string的最後一個字符後面的位置
const_iterator rbegin()const;
iterator rbegin(); //返回string的最後一個字符的位置
const_iterator rend()const;
iterator rend(); //返回string第一個字符位置的前面
rbegin和rend用於從後向前的迭代訪問,通過設置迭代器string::reverse_iterator,string::const_reverse_iterator實現
字符串流處理:
通過定義ostringstream和istringstream變量實現,#include <sstream>頭文件中
例如:
string input("hello,this is a test");
istringstream is(input);
string s1,s2,s3,s4;
is>>s1>>s2>>s3>>s4;//s1="hello,this",s2="is",s3="a",s4="test"
ostringstream os;
os<<s1<<s2<<s3<<s4;
cout<<os.str();
- //string函數用法詳解!附代碼,寫具體的用法!
- #include <iostream>
- #include <string>
- #include <sstream>
- using namespace std;
- int main()
- {
- //1.string類重載運算符operator>>用於輸入,同樣重載運算符operator<<用於輸出操作
- string str1;
- cin >> str1;//當用cin>>進行字符串的輸入的時候,遇到空格的地方就停止字符串的讀取輸入
- cout << str1 << endl;
- cin.get();//這個的作用就是讀取cin>>輸入的結束符,不用對getline的輸入產生影響!
- getline(cin, str1);//字符串的行輸入
- cout << str1 << endl;
- //2.string類的構造函數
- string str2 = "aaaaa";//最簡單的字符串初始化
- cout << str2 << endl;
- char *s = "bbbbb";
- string str3(s);//用c字符串s初始化
- cout << str3 << endl;
- char ch = 'c';
- string str4(5, ch);//用n個字符ch初始化
- cout << str4 << endl;
- //3.string類的字符操作
- string str5 = "abcde";
- ch = str5[3];//operator[]返回當前字符串中第n個字符的位置
- cout << ch << endl;
- string str6 = "abcde";
- ch = str6.at(4);//at()返回當前字符串中第n個字符的位置,並且提供範圍檢查,當越界時會拋出異常!
- cout << ch << endl;
- //4.string的特性描述
- string str7 = "abcdefgh";
- int size;
- size = str7.capacity();//返回當前容量
- cout << size << endl;
- size = str7.max_size();//返回string對象中可存放的最大字符串的長度
- cout << size << endl;
- size = str7.size();//返回當前字符串的大小
- cout << size << endl;
- size = str7.length();//返回當前字符串的長度
- cout << size << endl;
- bool flag;
- flag = str7.empty();//判斷當前字符串是否爲空
- cout << flag << endl;
- int len = 10;
- str7.resize(len, ch);//把字符串當前大小置爲len,並用字符ch填充不足的部分
- cout << str7 << endl;
- //5.string的賦值
- string str8;
- str8 = str7;//把字符串str7賦給當前字符串
- cout << str8 << endl;
- str8.assign(str7);//把字符串str7賦給當前字符串
- cout << str8 << endl;
- str8.assign(s);//用c類型字符串s賦值
- cout << str8 << endl;
- str8.assign(s, 2);//用c類型字符串s開始的n個字符賦值
- cout << str8 << endl;
- str8.assign(len, ch);//用len個字符ch賦值給當前字符串
- cout << str8 << endl;
- str8.assign(str7, 0, 3);//把字符串str7中從0開始的3個字符賦給當前字符串
- cout << str8 << endl;
- string str9 = "0123456789";
- str8.assign(str9.begin(), str9.end());//把迭代器之間的字符賦給字符串
- cout << str8 << endl;
- //6.string的連接
- string str10;
- str10 += str9;//把字符串str9連接到當前字符串的結尾
- cout << str10 << endl;
- str10.append(s);//把c類型字符串s連接到當前字符串的結尾
- cout << str10 << endl;
- str10.append(s, 2);//把c類型字符串s的前2個字符連接到當前字符串的結尾
- cout << str10 << endl;
- str10.append(str9.begin(), str9.end());//把迭代器之間的一段字符連接到當前字符串的結尾
- cout << str10 << endl;
- str10.push_back('k');//把一個字符連接到當前字符串的結尾
- cout << str10 << endl;
- //7.string的比較
- flag = (str9 == str10);//判斷兩個字符串是否相等
- cout << flag << endl;
- flag = (str9 != str10);//判斷兩個字符串是否不相等
- cout << flag << endl;
- flag = (str9 > str10);//判斷兩個字符串是否大於關係
- cout << flag << endl;
- flag = (str9 < str10);//判斷兩個字符串是否爲小於關係
- cout << flag << endl;
- flag = (str9 >= str10);//判斷兩個字符串是否爲大於等於關係
- cout << flag << endl;
- flag = (str9 <= str10);//判斷兩個字符串否爲小於等於關係
- cout << flag << endl;
- //以下的3個函數同樣適用於c類型的字符串,在compare函數中>時返回1,<時返回-1,=時返回0
- flag = str10.compare(str9);//比較兩個字符串的大小,通過ASCII的相減得出!
- cout << flag << endl;
- flag = str10.compare(6, 12, str9);//比較str10字符串從6開始的12個字符組成的字符串與str9的大小
- cout << flag << endl;
- flag = str10.compare(6, 12, str9, 3, 5);//比較str10字符串從6開始的12個字符組成的字符串與str9字符串從3開始的5個字符組成的字符串的大小
- cout << flag << endl;
- //8.string的字串
- string str11;
- str11 = str10.substr(10, 15);//返回從下標10開始的15個字符組成的字符串
- cout << str11 << endl;
- //9.string的交換
- str11.swap(str10);//交換str11與str10的值
- cout << str11 << endl;
- //10.string的查找,查找成功時返回所在位置,失敗時返回string::npos的值,即是-1
- string str12 = "abcdefghijklmnopqrstuvwxyz";
- int pos;
- pos = str12.find('i', 0);//從位置0開始查找字符i在當前字符串的位置
- cout << pos << endl;
- pos = str12.find("ghijk", 0);//從位置0開始查找字符串“ghijk”在當前字符串的位置
- cout << pos << endl;
- pos = str12.find("opqrstuvw", 0, 4);//從位置0開始查找字符串“opqrstuvw”前4個字符組成的字符串在當前字符串中的位置
- cout << pos << endl;
- pos = str12.rfind('s', string::npos);//從字符串str12反向開始查找字符s在字符串中的位置
- cout << pos << endl;
- pos = str12.rfind("klmn", string::npos);//從字符串str12反向開始查找字符串“klmn”在字符串中的位置
- cout << pos << endl;
- pos = str12.rfind("opqrstuvw", string::npos, 3);//從string::pos開始從後向前查找字符串s中前n個字符組成的字符串在當前串中的位置
- cout << pos << endl;
- string str13 = "aaaabbbbccccdddeeefffggghhhiiijjjkkllmmmandjfaklsdfpopdtwptioczx";
- pos = str13.find_first_of('d', 0);//從位置0開始查找字符d在當前字符串第一次出現的位置
- cout << pos << endl;
- pos = str13.find_first_of("eefff", 0);//從位置0開始查找字符串“eeefff“在當前字符串中第一次出現的位置
- cout << pos << endl;
- pos = str13.find_first_of("efff", 0, 3);//從位置0開始查找當前串中第一個在字符串”efff“的前3個字符組成的數組裏的字符的位置
- cout << pos << endl;
- pos = str13.find_first_not_of('b', 0);//從當前串中查找第一個不在串s中的字符出現的位置
- cout << pos << endl;
- pos = str13.find_first_not_of("abcdefghij", 0);//從當前串中查找第一個不在串s中的字符出現的位置
- cout << pos << endl;
- pos = str13.find_first_not_of("abcdefghij", 0, 3);//從當前串中查找第一個不在由字符串”abcdefghij”的前3個字符所組成的字符串中的字符出現的位置
- cout << pos << endl;
- //下面的last的格式和first的一致,只是它從後面檢索!
- pos = str13.find_last_of('b', string::npos);
- cout << pos << endl;
- pos = str13.find_last_of("abcdef", string::npos);
- cout << pos << endl;
- pos = str13.find_last_of("abcdef", string::npos, 2);
- cout << pos << endl;
- pos = str13.find_last_not_of('a', string::npos);
- cout << pos << endl;
- pos = str13.find_last_not_of("abcdef", string::npos);
- cout << pos << endl;
- pos = str13.find_last_not_of("abcdef", string::npos, 3);
- cout << pos << endl;
- //11.string的替換
- string str14 = "abcdefghijklmn";
- str14.replace(0, 3, "qqqq");//刪除從0開始的3個字符,然後在0處插入字符串“qqqq”
- cout << str14 << endl;
- str14.replace(0, 3, "vvvv", 2);//刪除從0開始的3個字符,然後在0處插入字符串“vvvv”的前2個字符
- cout << str14 << endl;
- str14.replace(0, 3, "opqrstuvw", 2, 4);//刪除從0開始的3個字符,然後在0處插入字符串“opqrstuvw”從位置2開始的4個字符
- cout << str14 << endl;
- str14.replace(0, 3, 8, 'c');//刪除從0開始的3個字符,然後在0處插入8個字符 c
- cout << str14 << endl;
- //上面的位置可以換爲迭代器的位置,操作是一樣的,在這裏就不再重複了!
- //12.string的插入,下面的位置處亦可以用迭代器的指針表示,操作是一樣的
- string str15 = "abcdefg";
- str15.insert(0, "mnop");//在字符串的0位置開始處,插入字符串“mnop”
- cout << str15 << endl;
- str15.insert(0, 2, 'm');//在字符串的0位置開始處,插入2個字符m
- cout << str15 << endl;
- str15.insert(0, "uvwxy", 3);//在字符串的0位置開始處,插入字符串“uvwxy”中的前3個字符
- cout << str15 << endl;
- str15.insert(0, "uvwxy", 1, 2);//在字符串的0位置開始處,插入從字符串“uvwxy”的1位置開始的2個字符
- cout << str15 << endl;
- //13.string的刪除
- string str16 = "gfedcba";
- string::iterator it;
- it = str16.begin();
- it++;
- str16.erase(it);//刪除it指向的字符,返回刪除後迭代器的位置
- cout << str16 << endl;
- str16.erase(it, it+3);//刪除it和it+3之間的所有字符,返回刪除後迭代器的位置
- cout << str16 << endl;
- str16.erase(2);//刪除從字符串位置3以後的所有字符,返回位置3前面的字符
- cout << str16 << endl;
- //14.字符串的流處理
- string str17("hello,this is a test");
- istringstream is(str17);
- string s1,s2,s3,s4;
- is>>s1>>s2>>s3>>s4;//s1="hello,this",s2="is",s3="a",s4="test"
- ostringstream os;
- os<<s1<<s2<<s3<<s4;
- cout<<os.str() << endl;
- system("pause");
- }