|
The scenario is, I want to register minisip client(SUSE Linux 10) with OpenSER (Suse Linux 10) in a LAN scenario for a demo.
I compiled & installed OpenSER with TLS support and I can start OpenSER and it listens on the following address 192.168.0.4:5061. I created a CA cert, server certificate and a client certificate with the scripts provided by OpenSER. I ported the client certificate, private key and ca list to minisip running machine ( 192.168.0.3) and then loaded in the client. The user I created in OpenSER using openserctl is user2 and I can check out the user in MySQL table. Minisip GUI configuration: Configuring the user: user2 in minisip, I set the network port to: 5061 Certificate settings: I loaded the certificate, private key and ca_list u I enable TLS(5061), TCP(5060) Problem: When I start minisip, after starting OpenSER, I get the following error. I have also pasted the OpenSER.cfg file below the error. In the minisip status, it also shows the client is still unregistered. Any suggestions/help in this regard is greatly appreciated. MINISIP ERROR: linux:/home/user1/minisip # minisip Starting MiniSIP ... welcome! Initializing NetUtil Creating SipSoftPhoneConfiguration init 1/9: Creating timeout provider init 2/9: Creating GUI Creating GTK GUI (minisip:5575): gtkmm-WARNING **: gtkmm: Attempt to call Gtk::manage() on a Gtk::Window, but a Gtk::Window has no parent container to manage its lifetime. Minisip: gtk 1 Minisip: gtk 2 Setting contact db Thread 2 running - doing initParseConfig init 3/9: Parsing configuration file () config file version checked ok! SipIdentity::SipIdentity : cretated identity id=1 SipIdentity::setSipUri: sipUsername=<user2> sipDomain=< 192.168.0.4 > SipIdentity::setSipProxy: autodetect is false; userUri= user2 [!at] 192.168.0.4 (replace the [!at] with a @) ; transport = TLS; proxyAddr=192.168.0.4 ; proxyPort=5061 SipProxy:setProxy(str) : addr = 192.168.0.4 SipIdentity::setProxy: manual sipproxy success ... SipIdentity::setProxy: else ... Identities: identity=1; username=user2; domain= 192.168.0.4 proxy=[proxyString=192.168.0.4 ; proxyString=192.168.0.4 ; port=5061; transport=TLS; autodetect=no; user=user2; password=user2; expires=1000]; isRegistered=0 init 4/9: Creating IP provider SimpleIPProvider: localIp = SimpleIPProvider: checking interface = lo with IP= 127.0.0.1 SimpleIPProvider: checking interface = eth0 with IP= 192.168.0.3 SimpleIPProvider: using localIP = 192.168.0.3 init 5/9: Creating MediaHandler Sound I/O: using Spatial Audio Mixer Adding audio codec: G.711 init 6/9: Creating MSip SIP stack init 7/9: Connecting GUI to SIP logic init 8.2/9: Starting TCP transport worker thread init 9/9: Registering Identities to registrar server Registering user user2 [!at] 192.168.0.4 (replace the [!at] with a @) to proxy 192.168.0.4 , requesting domain 192.168.0.4 SipMessageTransport: sendMessage: creating new socket Creating new SSL_CTX SSL: connect failed SipMessageTransport: sendMessage: exception thrown! SipMessageTransport: sendMessage: creating new socket SSL: connect failed SipMessageTransport: sendMessage: exception thrown! SipMessageTransport: sendMessage: exception thrown! SipIdentity::SipIdentity : cretated identity id=2 SipIdentity::setSipUri: sipUsername=<user2> sipDomain=< 192.168.0.4 > SipIdentity::setSipProxy: autodetect is false; userUri= user2 [!at] 192.168.0.4 (replace the [!at] with a @) ; transport = TLS; proxyAddr=192.168.0.4 ; proxyPort=5061 SipProxy:setProxy(str) : addr = 192.168.0.4 SipIdentity::setProxy: manual sipproxy success ... SipIdentity::setProxy: else ... Sound I/O: using Spatial Audio Mixer Adding audio codec: G.711 SipIdentity::SipIdentity : cretated identity id=3 SipIdentity::setSipUri: sipUsername=<user2> sipDomain=< 192.168.0.4 > SipIdentity::setSipProxy: autodetect is false; userUri= user2 [!at] 192.168.0.4 (replace the [!at] with a @) ; transport = TLS; proxyAddr=192.168.0.4 ; proxyPort=5061 SipProxy:setProxy(str) : addr = 192.168.0.4 SipIdentity::setProxy: manual sipproxy success ... SipIdentity::setProxy: else ... Sound I/O: using Spatial Audio Mixer Adding audio codec: G.711 SipIdentity::SipIdentity : cretated identity id=4 SipIdentity::setSipUri: sipUsername=<user2> sipDomain=< 192.168.0.4 > SipIdentity::setSipProxy: autodetect is false; userUri= user2 [!at] 192.168.0.4 (replace the [!at] with a @) ; transport = TLS; proxyAddr=192.168.0.4 ; proxyPort=5061 SipProxy:setProxy(str) : addr = 192.168.0.4 SipIdentity::setProxy: manual sipproxy success ... SipIdentity::setProxy: else ... Sound I/O: using Spatial Audio Mixer Adding audio codec: G.711 OpenSER.cfg # $Id: openser.cfg,v 1.5 2005/10/28 19:45:33 bogdan_iancu Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode fork=yes log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/openser_fifo" # # uncomment the following lines for TLS support disable_tls = 0 listen = tls: 192.168.0.4:5061 tls_verify = 1 tls_require_certificate = 0 tls_method = TLSv1 tls_certificate = "/usr/local/etc/openser/user/user- cert.pem" tls_private_key = "/usr/local/etc/openser/user/user- privkey.pem" tls_ca_list = "/usr/local/etc/openser/user/user- calist.pem" #tls_ciphers_list="NULL-SHA:NULL-MD5:AES256-SHA:AES128-SHA" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/openser/modules/mysql.so" loadmodule "/usr/local/lib/openser/modules/sl.so" loadmodule "/usr/local/lib/openser/modules/tm.so" loadmodule "/usr/local/lib/openser/modules/rr.so" loadmodule "/usr/local/lib/openser/modules/maxfwd.so" loadmodule "/usr/local/lib/openser/modules/usrloc.so" loadmodule "/usr/local/lib/openser/modules/registrar.so" loadmodule "/usr/local/lib/openser/modules/textops.so" #loadmodule "/usr/local/lib/openser/modules/uri_db.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/openser/modules/auth.so" loadmodule "/usr/local/lib/openser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") modparam("auth_db","db_url"," mysql://openser:openserrw@localhost/openser") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced/r/n"); route(1); }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound/r/n"); # if you have some interdomain connections via TLS #if(uri=~"@tls_domain1.net") { # t_relay_to_tls("IP_domain1","port_domain1"); # exit; #} else if(uri=~"@tls_domain2.net") { # t_relay_to_tls("IP_domain2","port_domain2"); # exit; #} route(1); }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("192.168.0.4", "subscriber")) { www_challenge("192.168.0.4", "0"); exit; }; save("location"); exit; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias/r/n"); route(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied/r/n"); }; route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; } |
