該文轉載於http://www.cnblogs.com/FrankTan/archive/2010/03/01/1634516.html
0.引言
寫程序的時候經常要處理命令行參數,本文描述在Bash下的命令行處理方式。
選項與參數:
如下一個命令行:
./test.sh -f config.conf -v –prefix=/home
我們稱-f爲選項,它需要一個參數,即config.conf, -v 也是一個選項,但它不需要參數。
–prefix我們稱之爲一個長選項,即選項本身多於一個字符,它也需要一個參數,用等號連接,當然等號不是必須的,/home可以直接寫在–prefix後面,即–prefix/home,更多的限制後面具體會講到。
在bash中,可以用以下三種方式來處理命令行參數,每種方式都有自己的應用場景。
* 手工處理方式
* getopts
* getopt
下面我們依次討論這三種處理方式。
1. 手工處理方式
在手工處理方式中,首先要知道幾個變量,還是以上面的命令行爲例:
* $0 : ./test.sh,即命令本身,相當於C/C++中的argv[0]
* $1 : -f,第一個參數.
* $2 : config.conf
* $3, $4 ... :類推。
* $# 參數的個數,不包括命令本身,上例中$#爲4.
* $@ :參數本身的列表,也不包括命令本身,如上例爲 -f config.conf -v --prefix=/home
* $* :和$@相同,但"$*" 和 "$@"(加引號)並不同,"$*"將所有的參數解釋成一個字符串,而"$@"是一個參數數組。如下例所示:
1 #!/bin/bash
2
3 for arg in "$*"
4 do
5 echo $arg
6 done
7
8 for arg in "$@"
9 do
10 echo $arg
11 done
12
執行./test.sh -f config.conf -n 10 會打印:
-f config.conf -n 10 #這是”$*”的輸出
-f #以下爲$@的輸出
config.conf
-n
10
所以,手工處理的方式即對這些變量的處理。因爲手工處理高度依賴於你在命令行上所傳參數的位置,所以一般都只用來處理較簡單的參數。如
./test.sh 10
而很少使用./test -n 10這種帶選項的方式。 典型用法爲:
#!/bin/bash
if [ x$1 != x ]
then
#...有參數
else
then
#...沒有參數
fi
爲什麼要使用 x$1 != x 這種方式來比較呢?想像一下這種方式比較:
if [ -n 1 ] # 1不爲空
但如果用戶不傳參數的時候,$1爲空,這時 就會變成 [ -n ] ,所以需要加一個輔助字符串來進行比較。
手工處理方式能滿足大多數的簡單需求,配合shift使用也能構造出強大的功能,但在要處理複雜選項的時候建議用下面的兩種方法。
- getopts/getopt
處理命令行參數是一個相似而又複雜的事情,爲此,C提供了getopt/getopt_long等函數,
C++的boost提供了Options庫,在shell中,處理此事的是getopts和getopt.
getopts和getopt功能相似但又不完全相同,其中getopt是獨立的可執行文件,而getopts是由Bash內置的。
先來看看參數傳遞的典型用法:
* ./test.sh -a -b -c : 短選項,各選項不需參數
* ./test.sh -abc : 短選項,和上一種方法的效果一樣,只是將所有的選項寫在一起。
* ./test.sh -a args -b -c :短選項,其中-a需要參數,而-b -c不需參數。
* ./test.sh --a-long=args --b-long :長選項
我們先來看getopts,它不支持長選項。
使用getopts非常簡單:
代碼
#test.sh
#!/bin/bash
while getopts "a:bc" arg #選項後面的冒號表示該選項需要參數
do
case $arg in
a)
echo "a's arg:$OPTARG" #參數存在$OPTARG中 $OPTARG是一個特殊參數類似於$1
;;
b)
echo "b"
;;
c)
echo "c"
;;
?) #當有不認識的選項的時候arg爲?
echo "unkonw argument"
exit 1
;;
esac
done
現在就可以使用:
./test.sh -a arg -b -c
或
./test.sh -a arg -bc
來加載了。
應該說絕大多數腳本使用該函數就可以了,如果需要支持長選項以及可選參數,那麼就需要使用getopt.
下面是getopt自帶的一個例子:
#!/bin/bash
# A small example program for using the new getopt(1) program.
# This program will only work with bash(1)
# An similar program using the tcsh(1) script language can be found
# as parse.tcsh
# Example input and output (from the bash prompt):
# ./parse.bash -a par1 'another arg' --c-long 'wow!*\?' -cmore -b " very long "
# Option a
# Option c, no argument
# Option c, argument `more'
# Option b, argument ` very long '
# Remaining arguments:
# --> `par1'
# --> `another arg'
# --> `wow!*\?'
# Note that we use `"$@"' to let each command-line parameter expand to a
# separate word. The quotes around `$@' are essential!
# We need TEMP as the `eval set --' would nuke the return value of getopt.
#-o表示短選項,兩個冒號表示該選項有一個可選參數,可選參數必須緊貼選項
#如-carg 而不能是-c arg
#--long表示長選項
#"$@"在上面解釋過
# -n:出錯時的信息
# -- :舉一個例子比較好理解:
#我們要創建一個名字爲 "-f"的目錄你會怎麼辦?
# mkdir -f #不成功,因爲-f會被mkdir當作選項來解析,這時就可以使用
# mkdir -- -f 這樣-f就不會被作爲選項。
TEMP=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \
-n 'example.bash' -- "$@"`
if [ $? != 0 ] ; then echo "Terminating..." >&2 ; exit 1 ; fi
# Note the quotes around `$TEMP': they are essential!
#set 會重新排列參數的順序,也就是改變$1,$2...$n的值,這些值在getopt中重新排列過了
eval set -- "$TEMP"
#經過getopt的處理,下面處理具體選項。
while true ; do
case "$1" in
-a|--a-long) echo "Option a" ; shift ;;
-b|--b-long) echo "Option b, argument \`$2'" ; shift 2 ;;
-c|--c-long)
# c has an optional argument. As we are in quoted mode,
# an empty parameter will be generated if its optional
# argument is not found.
case "$2" in
"") echo "Option c, no argument"; shift 2 ;;
*) echo "Option c, argument \`$2'" ; shift 2 ;;
esac ;;
--) shift ; break ;;
*) echo "Internal error!" ; exit 1 ;;
esac
done
echo "Remaining arguments:"
for arg do
echo '--> '"\`$arg'" ;
done
比如我們使用
./test -a -b arg arg1 -c
你可以看到,命令行中多了個arg1參數,在經過getopt和set之後,命令行會變爲:
-a -b arg -c – arg1
3.總結
一般小腳本手工處理也許就夠了,getopts能處理絕大多數的情況,getopt較複雜,功能也更強大。
有問題請指出,不勝感激。
該文轉載於http://www.cnblogs.com/FrankTan/archive/2010/03/01/1634516.html