導讀 | Semanage是用於配置SELinux策略某些元素而無需修改或重新編譯策略源的工具。 這包括將Linux用戶名映射到SELinux用戶身份以及對象(如網絡端口,接口和主機)的安全上下文映射。 |
簡介
Semanage是用於配置SELinux策略某些元素而無需修改或重新編譯策略源的工具。 這包括將Linux用戶名映射到SELinux用戶身份以及對象(如網絡端口,接口和主機)的安全上下文映射。
實驗環境
Centos7.7操作系統
Selinux已經開啓
開啓方式:
[root@localhost ~]# sed -i '/^SELINUX/s/disabled/enforcing/g' /etc/selinux/config
# 然後重啓一下操作系統
[root@localhost ~]# reboot
# 重啓完成之後檢查一下是否是enforcing模式
[root@localhost ~]# getenforce
Enforcing
常用參數
- port: 管理定義的網絡端口類型
- fcontext: 管理定義的文件上下文
- -l: 列出所有記錄
- -a: 添加記錄
- -m: 修改記錄
- -d: 刪除記錄
- -t: 添加的類型
- -p: 指定添加的端口是tcp或udp協議的,port子命令下使用
- -e: 目標路徑參考原路徑的上下文類型,fcontext子命令下使用
列出所有定義的端口
使用semanage port命令列出所有端口
[root@localhost ~]# semanage port -l
SELinux Port Type Proto Port Number
afs3_callback_port_t tcp 7001
afs3_callback_port_t udp 7001
afs_bos_port_t udp 7007
afs_fs_port_t tcp 2040
afs_fs_port_t udp 7000, 7005
afs_ka_port_t udp 7004
afs_pt_port_t tcp 7002
afs_pt_port_t udp 7002
afs_vl_port_t udp 7003
agentx_port_t tcp 705
agentx_port_t udp 705
amanda_port_t tcp 10080-10083
amanda_port_t udp 10080-10082
…
…
列出指定的端口類型的端口
[root@localhost ~]# semanage port -l|grep -w http_port_t
http_port_t tcp 80, 81, 443, 488, 8008, 8009, 8443, 9000
通過查詢端口號來列出端口類型
[root@localhost ~]# semanage port -l|grep -w 53
dns_port_t tcp 53
dns_port_t udp 53
[root@localhost ~]# semanage port -l|grep -w 20
ftp_data_port_t tcp 20
[root@localhost ~]# semanage port -l|grep -w 21
ftp_port_t tcp 21, 989, 990
創建、添加、修改端口
通過下面的命令爲http添加新端口
[root@localhost ~]#
[root@localhost ~]# semanage port -a -t http_port_t -p tcp 8888
[root@localhost ~]#
# 查看新添加的端口
[root@localhost ~]# semanage port -l|grep -w 8888
http_port_t tcp 8888, 80, 81, 443, 488, 8008, 8009, 8443, 9000
# 也可以使用-C參數查看自定義的端口號
[root@localhost ~]# semanage port -lC
SELinux Port Type Proto Port Number
http_port_t tcp 8888
添加一個範圍的端口
[root@localhost ~]# semanage port -a -t http_port_t -p tcp 11180-11188
[root@localhost ~]#
[root@localhost ~]# semanage port -lC
SELinux Port Type Proto Port Number
http_port_t tcp 8888, 11180-11188
刪除端口
[root@localhost ~]# semanage port -d -t http_port_t -p tcp 8888
[root@localhost ~]#
[root@localhost ~]# semanage port -d -t http_port_t -p tcp 11180-11188
[root@localhost ~]#
# 查看一下,已經沒有自定義的端口了
[root@localhost ~]# semanage port -lC
修改安全上下文
爲samba共享目錄添加安全上下文
# 沒添加安全上下文之前是default_t
[root@localhost ~]# ll -dZ /share/
drwxr-xr-x. root root unconfined_u:object_r:default_t:s0 /share/
[root@localhost ~]# semanage fcontext -a -t samba_share_t '/share(/.*)?'
# 恢復文件默認的安全上下文
[root@localhost ~]# restorecon -Rv /share
restorecon reset /share context unconfined_u:object_r:default_t:s0->unconfined_u:object_r:samba_share_t:s0
# 查看一下文件夾已經變成samba_share_t了
[root@localhost ~]# ll -dZ /share
drwxr-xr-x. root root unconfined_u:object_r:samba_share_t:s0 /share
爲nfs共享目錄添加讀寫
[root@localhost ~]# ll -dZ /nfsshare/
drwxr-xr-x. root root unconfined_u:object_r:default_t:s0 /nfsshare/
[root@localhost ~]#
[root@localhost ~]# semanage fcontext -a -t public_content_rw_t '/nfsshare(/.*)?'
[root@localhost ~]# restorecon -Rv /nfsshare
[root@localhost ~]# ll -dZ /nfsshare/
drwxr-xr-x. root root unconfined_u:object_r:public_content_rw_t:s0 /nfsshare/
總結
本文講述了添加、修改和刪除端口,修改安全上下文。如果你的系統有安裝桌面,可以安裝圖形化管理軟件 policycoreutils-gui來進行管理。
[root@localhost ~]# yum -y install policycoreutils-gui
# system-config-selinux執行該命令打開圖形化管理界面
[root@localhost ~]# system-config-selinux
原文地址:https://www.linuxprobe.com/semanage-selinux-policy.html