- 空間積分
- 0
- 信譽積分
- 50
- UID
- 17135777
- 閱讀權限
- 100
- 積分
- 1025
- 帖子
- 4467
- 精華
- 1
- 可用積分
- 1026
- 專家積分
- 20
- 在線時間
- 3751 小時
- 註冊時間
- 2008-03-04
- 最後登錄
- 2012-02-02
- 帖子
- 4467
- 主題
- 452
- 精華
- 1
- 可用積分
- 1026
- 專家積分
- 20
- 在線時間
- 3751 小時
- 註冊時間
- 2008-03-04
- 最後登錄
- 2012-02-02
- 論壇徽章:
- 0
|
我的以前是eth5
root@ubuntu:/etc/udev/rules.d#
ifconfig
eth5 Link encap:Ethernet HWaddr 00:0c:29:c6:bc:7c
inet addr:192.168.16.25 Bcast:192.168.16.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fec6:bc7c/64
Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1111 errors:0 dropped:0 overruns:0 frame:0
TX packets:871 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:152479
(152.4 KB) TX bytes:106075
(106.0 KB)
Interrupt:18 Base address:0x2000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr:
::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:80 errors:0 dropped:0 overruns:0 frame:0
TX packets:80 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4000
(4.0 KB) TX bytes:4000
(4.0 KB)
更改如下文件,看好你的mac地址
root@ubuntu:/etc/udev/rules.d#
vim /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single line.
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add",
DRIVERS=="?*", ATTR{address}=="00:0c:29:0e:ad:8a",
ATTR{type}=="1", KERNEL=="eth*",
NAME="eth5" # PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add",
DRIVERS=="?*", ATTR{address}=="00:0c:29:26:0b:66",
ATTR{type}=="1", KERNEL=="eth*",
NAME="eth1" # PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add",
DRIVERS=="?*", ATTR{address}=="00:0c:29:d5:16:28",
ATTR{type}=="1", KERNEL=="eth*",
NAME="eth2" # PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add",
DRIVERS=="?*", ATTR{address}=="00:0c:29:fe:47:db",
ATTR{type}=="1", KERNEL=="eth*",
NAME="eth3" # PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add",
DRIVERS=="?*", ATTR{address}=="00:0c:29:3e:b1:4f",
ATTR{type}=="1", KERNEL=="eth*",
NAME="eth4"
下面這裏mac地址我對應的,是eth5,我改爲eth0了 # PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add",
DRIVERS=="?*", ATTR{address}=="00:0c:29:c6:bc:7c",
ATTR{type}=="1", KERNEL=="eth*",
NAME="eth0"
root@ubuntu:/etc/udev/rules.d#
init 6
重啓後從新登錄
root@ubuntu:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0c:29:c6:bc:7c
inet addr:192.168.16.25 Bcast:192.168.16.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fec6:bc7c/64
Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:34 errors:0 dropped:0 overruns:0 frame:0
TX packets:82 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:8409
(8.4 KB) TX bytes:11509
(11.5 KB)
Interrupt:18 Base address:0x2000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr:
::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:108 errors:0 dropped:0 overruns:0 frame:0
TX packets:108 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:6124
(6.1 KB) TX bytes:6124
(6.1 KB)
|
|