轉自http://www.cnblogs.com/kykuaileren/archive/2011/09/25/2190217.html
1、string類的構造函數
eg:
string(const char *s); // 用c字符串初始化
string(int n, char c); // 用n個字符c初始化
此外,string類還支持默認構造函數和複製構造函數,如string s1; string s2 = “hello”; 都是正確寫法。
當構造的string太長而無法表達時會拋出length_error異常,而且一般不支持中文字符操作。
2、string類的字符操作
1: const char &operator[](int n)const;
2: const char &at(int n)const;
3: char &operator[](int n);
4: char &at(int n);
5: //operator[]和at()均返回當前字符串中第n個字符的位置
6: //但at函數提供範圍檢查,當越界時會拋出out_of_range異常
7: //下標運算符[]不提供檢查訪問。
8:
9: const char *data()const;//返回一個非null終止的c字符數組
10: const char *c_str();//返回一個以null終止的c字符串
11: int copy(char *s, int n, int pos = 0) const;//把當前串中以pos開始的n個字符拷貝到以s爲起始位置的字符數組中,返回實際拷貝的數目
3、 string類的屬性描述
1: int capacity() const; //返回當前容量(即string中不必增加內存即可存放的元素個數)
2: int max_size() const;//返回string對象中可存放的最大字符串的長度
3: int size() const;//返回當前字符串的大小
4: int length() const;//返回當前字符串的長度,目前所知,長度和大小沒什麼區別
5: bool empty() const;//當前字符串是否爲空
6: void resize(int len, char c);//把當前字符串大小置爲len,如果len比原字符串小,則從後面開始截斷,如果比原字符串大,用字符c填充不足的部分。
1: string &operator=(const string &s);//把字符串s賦給當前字符串
2: string &assign(const char *s);//用c類型字符串s賦值
3: string &assign(const char *s,int n);//用c字符串s開始的n個字符賦值
4: string &assign(const string &s);//把字符串s賦給當前字符串
5: string &assign(int n,char c);//用n個字符c賦值給當前字符串
6: string &assign(const string &s,int start,int n);//把字符串s中從start開始的n個字符賦給當前字符串
7: string &assign(const_iterator first,const_itertor last);//把first和last迭代器之間的部分賦給字符串
8: //大部分都要求輸入的變量時靜態變量
5、string的連接
1: string &operator +=(const string &s);//把s連接到當前字符串的結尾
2: string &append(const char *s);//把s連接到當前字符串的結尾
3: string &append(const_iterator first, const_iterate last);//把迭代器first和last之間的部分連接到當前字符串的結尾
6、string的比較
1: bool operator==(const string &s1,const string &s2)const;//比較兩個字符串是否相等
2: //運算符">","<",">=","<=","!="均被重載用於字符串的比較;
3: int compare(const string &s) const;//比較當前字符串和s的大小
4: int compare(int pos, int n,const string &s)const;//比較當前字符串從pos開始的n個字符組成的字符串與s的大小
5: int compare(int pos, int n,const string &s,int pos2,int n2)const;//比較當前字符串從pos開始的n個字符組成的字符串與s中pos2開始的n2個字符組成的字符串的大小
6: int compare(const char *s) const;
7: int compare(int pos, int n,const char *s) const;
8: int compare(int pos, int n,const char *s, int pos2) const;
9: //compare函數在>時返回1,<時返回-1,==時返回0
7、string的子串
string substr(int pos = 0, int n = npos) const; // 返回pos開始的n個字符組成的字符串
8、string的交換
void swap(string &s2); //交換當前字符串與s2的值
9、string類的查找函數
1: int find(char c, int pos = 0) const;//從pos開始查找字符c在當前字符串的位置
2: int find(const char *s, int pos = 0) const;//從pos開始查找字符串s在當前串中的位置
3: int find(const char *s, int pos, int n) const;//從pos開始查找字符串s中前n個字符在當前串中的位置
4: int find(const string &s, int pos = 0) const;//從pos開始查找字符串s在當前串中的位置
5: //查找成功時返回所在位置,失敗返回string::npos的值
6:
7: int rfind(char c, int pos = npos) const;//從pos開始從後向前查找字符c在當前串中的位置
8: int rfind(const char *s, int pos = npos) const;
9: int rfind(const char *s, int pos, int n = npos) const;
10: int rfind(const string &s,int pos = npos) const;
11: //從pos開始從後向前查找字符串s中前n個字符組成的字符串在當前串中的位置,成功返回所在位置,失敗時返回string::npos的值
12:
13: int find_first_of(char c, int pos = 0) const;//從pos開始查找字符c第一次出現的位置
14: int find_first_of(const char *s, int pos = 0) const;
15: int find_first_of(const char *s, int pos, int n) const;
16: int find_first_of(const string &s,int pos = 0) const;
17: //從pos開始查找當前串中第一個在s的前n個字符組成的數組裏的字符的位置。查找失敗返回string::npos
18:
19: int find_first_not_of(char c, int pos = 0) const;
20: int find_first_not_of(const char *s, int pos = 0) const;
21: int find_first_not_of(const char *s, int pos,int n) const;
22: int find_first_not_of(const string &s,int pos = 0) const;
23: //從當前串中查找第一個不在串s中的字符出現的位置,失敗返回string::npos
24:
25: int find_last_of(char c, int pos = npos) const;
26: int find_last_of(const char *s, int pos = npos) const;
27: int find_last_of(const char *s, int pos, int n = npos) const;
28: int find_last_of(const string &s,int pos = npos) const;
29:
30: int find_last_not_of(char c, int pos = npos) const;
31: int find_last_not_of(const char *s, int pos = npos) const;
32: int find_last_not_of(const char *s, int pos, int n) const;
33: int find_last_not_of(const string &s,int pos = npos) const;
34: //find_last_of和find_last_not_of與find_first_of和find_first_not_of相似,只不過是從後向前查找
10、string類的替換函數
1: string &replace(int p0, int n0,const char *s);//刪除從p0開始的n0個字符,然後在p0處插入串s
2: string &replace(int p0, int n0,const char *s, int n);//刪除p0開始的n0個字符,然後在p0處插入字符串s的前n個字符
3: string &replace(int p0, int n0,const string &s);//刪除從p0開始的n0個字符,然後在p0處插入串s
4: string &replace(int p0, int n0,const string &s, int pos, int n);//刪除p0開始的n0個字符,然後在p0處插入串s中從pos開始的n個字符
5: string &replace(int p0, int n0,int n, char c);//刪除p0開始的n0個字符,然後在p0處插入n個字符c
6: string &replace(iterator first0, iterator last0,const char *s);//把[first0,last0)之間的部分替換爲字符串s
7: string &replace(iterator first0, iterator last0,const char *s, int n);//把[first0,last0)之間的部分替換爲s的前n個字符
8: string &replace(iterator first0, iterator last0,const string &s);//把[first0,last0)之間的部分替換爲串s
9: string &replace(iterator first0, iterator last0,int n, char c);//把[first0,last0)之間的部分替換爲n個字符c
10: string &replace(iterator first0, iterator last0,const_iterator first, const_iterator last);//把[first0,last0)之間的部分替換成[first,last)之間的字符串
11、string類的插入函數
1: string &insert(int p0, const char *s);
2: string &insert(int p0, const char *s, int n);
3: string &insert(int p0,const string &s);
4: string &insert(int p0,const string &s, int pos, int n);
5: //前4個函數在p0位置插入字符串s中pos開始的前n個字符
6: string &insert(int p0, int n, char c);//此函數在p0處插入n個字符c
7: iterator insert(iterator it, char c);//在it處插入字符c,返回插入後迭代器的位置
8: void insert(iterator it, const_iterator first, const_iterator last);//在it處插入[first,last)之間的字符
9: void insert(iterator it, int n, char c);//在it處插入n個字符c
12、string類的刪除函數
1: iterator erase(iterator first, iterator last);//刪除[first,last)之間的所有字符,返回刪除後迭代器的位置
2: iterator erase(iterator it);//刪除it指向的字符,返回刪除後迭代器的位置
3: string &erase(int pos = 0, int n = npos);//刪除pos開始的n個字符,返回修改後的字符串
13、string類的迭代器處理
1: //string類提供了向前和向後遍歷的迭代器iterator,迭代器提供了訪問各個字符的語法,類似於指針操作,迭代器不檢查範圍。
2: //用string::iterator或string::const_iterator聲明迭代器變量,const_iterator不允許改變迭代的內容。常用迭代器函數有:
3: const_iterator begin()const;
4: iterator begin(); //返回string的起始位置
5: const_iterator end()const;
6: iterator end(); //返回string的最後一個字符後面的位置
7: const_iterator rbegin()const;
8: iterator rbegin(); //返回string的最後一個字符的位置
9: const_iterator rend()const;
10: iterator rend(); //返回string第一個字符位置的前面
11: //rbegin和rend用於從後向前的迭代訪問,通過設置迭代器string::reverse_iterator,string::const_reverse_iterator實現
14、字符串流處理
通過定義ostringstream和istringstream變量實現,<sstream>頭文件中
例如:
1: string input("hello,this is a test");
2: istringstream is(input);
3: string s1,s2,s3,s4;
4: is>>s1>>s2>>s3>>s4;//s1="hello,this",s2="is",s3="a",s4="test"
5: ostringstream os;
6: os<<s1<<s2<<s3<<s4;
7: cout<<os.str();