新裝了Centos7後發現ifconfig命令失效
解決:需要按照net-tools工具
命令:yum install net-tools
輸入上述命令按回車,
安裝成功後命令生效了
在centos下 ifconfig 無報錯但無輸出結果?ifconfig不能用? [root@xwx~]# ifconfig [root@xwx~]# 如果已安裝則卸載載安裝就好了 #卸載net-tools yum remove
ifconfig命令是設置或顯示網絡接口的程序,可以顯示出我們機器的網卡信息,可是有些時候最小化安裝CentOS等Linux發行版的時候會默認不安裝ifconfig等命令,這時候你進入終端,運行ifconfig命令就會出錯 這是我
剛安裝的系統,可能不帶網絡命令工具,centos有網絡工具包net-tools,裏面包含:ifconfig, netstat, route, and others. 安裝: yum -y install net-tools
引子 最近,在調試基於Freescale IMX6UL板子的以太網口時,遇到了一個奇怪的問題:網口插拔時,系統檢測不到Link Down、Link UP事件。並且,在使用ifconfig eth0 up,然後再ifconfig e
本文翻譯自:How to get the primary IP address of the local machine on Linux and OS X? [closed] I am looking for a command lin
獲取e開頭的網卡的ip for i in `ifconfig|grep ^e[0-9a-z]*[0-9]:|sed 's/\:.*//g'`;do ifconfig $i;done|grep inet\\s|awk '{print $2
主要在linux系統中增加start.sh腳本: linux系統主要完成insmod和分配網卡id及netmask工作 root@imx8qmmek:/etc/profile.d# cat start.sh insmod /lib
CentOS7靜態網絡初始化配置 修改文件/etc/sysconfig/network-scripts/ifcfg-ens33和文件/etc/sysconfig/network # vi /etc/sysconfig/network-sc
1.修改主機名 1)/etc/sysconfig/network NETWORK=yes <=== 是否啓動網絡 HOSTNAME= <=== 主機名稱 2)/etc/hosts: 127.0.0.1 修改前一個主機名 2.修改IP地址
一、ConfigParser簡介 ConfigParser 是用來讀取配置文件的包。配置文件的格式如下:中括號“[ ]”內包含的爲section。section 下面爲類似於key-value 的配置內容。 [db] db_hos