esp-touch配置eps8266筆記

 

[2020-03-23_14:09:05]AT+RST

[2020-03-23_14:09:05]OK
[2020-03-23_14:09:05]WIFI DISCONNECT
[2020-03-23_14:09:05]
[2020-03-23_14:09:05] ets Jan  8 2013,rst cause:2, boot mode:(3,0)

[2020-03-23_14:09:05]load 0x40100000, len 1856, room 16 
[2020-03-23_14:09:05]tail 0
[2020-03-23_14:09:05]chksum 0x63
[2020-03-23_14:09:05]load 0x3ffe8000, len 776, room 8 
[2020-03-23_14:09:05]tail 0
[2020-03-23_14:09:05]chksum 0x02
[2020-03-23_14:09:05]load 0x3ffe8310, len 552, room 8 
[2020-03-23_14:09:05]tail 0
[2020-03-23_14:09:05]chksum 0x79
[2020-03-23_14:09:05]csum 0x79

[2020-03-23_14:09:05]2nd boot version : 1.5
[2020-03-23_14:09:05]  SPI Speed      : 40MHz
[2020-03-23_14:09:05]  SPI Mode       : DOUT
[2020-03-23_14:09:05]  SPI Flash Size & Map: 32Mbit(512KB+512KB)
[2020-03-23_14:09:05]jump to run user1 @ 1000

[2020-03-23_14:09:05]勩??鋻s皿n|?$d燁l勩{揹宭d`你r?靌?l`屻s抣嚐 ?$l`{$弬sl専銊cl刢s<?x`靌靋ls膌#祗n鐎og??鷖l?d那???噇?d€g?屵銓b$鞆x倪銓#$刢p;l{l
[2020-03-23_14:09:05]Ai-Thinker Technology Co. Ltd.

[2020-03-23_14:09:05]ready
[2020-03-23_14:09:07]WIFI DISCONNECT
[2020-03-23_14:09:08]AT+CWMODE=1

[2020-03-23_14:09:08]OK
[2020-03-23_14:09:09]WIFI CONNECTED
[2020-03-23_14:09:10]AT+CWSTARTSMART=3
[2020-03-23_14:09:10]
[2020-03-23_14:09:10]OK
[2020-03-23_14:09:10]WIFI DISCONNECT
[2020-03-23_14:09:39]smartconfig type:ESPTOUCH
[2020-03-23_14:09:43]Smart get wifi info
[2020-03-23_14:09:43]ssid:TP-LINK907C
[2020-03-23_14:09:43]password:2P1xz989
[2020-03-23_14:09:43]WIFI CONNECTED
[2020-03-23_14:09:46]WIFI GOT IP
[2020-03-23_14:09:50]smartconfig connected wifi

其實挺簡單的，就是先敲 3 條紅色的AT命令，然後打開手機ESP-Touch App，在打開APP之前請先確保你的手機已經聯網可上網的路由器，APP打開後，輸入當前wifi密碼，然後點提交就可以了。