一、软件安装
简介:Fabric是基于Python实现的SSH命令行工具，简化了SSH的应用程序部署及系统管理任务，它提供了系统基础的操作组件，可以实现本地或远程shell命令，包括：命令执行、文件上传、下载及完整执行日志输出等功能。Fabric在Paramiko的基础上做了更高一层的封装，操作起来会更加简单。
1、系统环境
[root@ansible ~]# cat /etc/redhat-release
CentOS release 6.10 (Final)
[root@ansible ~]# uname -r
2.6.32-504.el6.x86_64
2、升级python到python2.7版本
1、提前安装依赖包
yum install zlib zlib-devel gcc -y
2、先把python升级到python2.7
下载：
wget https://www.python.org/ftp/python/2.7.12/Python-2.7.12.tgz
#编译安装：
tar zxf Python-2.7.12.tgz
cd Python-2.7.12
./configure
make
make install
#修改python默认版本
mv /usr/bin/python /usr/bin/python2.6
#做个软链接
ln -s /usr/local/bin/python2.7 /usr/bin/python
#为防止yum执行异常，修改yum使用的python版本
vi /usr/bin/yum
将文件头#!/usr/bin/python修改为#!/usr/bin/python2.6
3、安装模块
1、setuptools(easy_install)模块
下载地址:(打开网站下载)
https://pypi.python.org/pypi/setuptools/27.1.2
软件包：setuptools-27.1.2.tar.gz
编译安装：
tar zxf setuptools-27.1.2.tar.gz
cd setuptools-27.1.2
python setup.py install
2、pip模块
easy_install pip
3、安装pycrypto
https://ftp.dlitz.net/pub/dlitz/crypto/pycrypto/pycrypto-2.6.1.tar.gz
#解压
tar -xzvf pycrypto-2.6.tar.gz
cd pycrypto-2.6
python setup.py install
4、通过pip安装常用模块
[root@paramiko-server tools]# pip install paramiko
4、安装Fabric
pip install Fabric
验证是否安装成功，出现如下图所示，说明fabric模块安装成功：
[root@template tools]# python
Python 2.7.12 (default, Apr 27 2017, 00:01:51)
[GCC 4.4.7 20120313 (Red Hat 4.4.7-18)] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> from fabric.api import run
>>> exit()
二、使用Fabric模块实现自动化运维
语法：
fab -p 123456 -H localhost -- 'uname -s' #--后面要加空格，主机密码：123456
示例1：
编写一个fabfile.py文件
vim fabfile.py
#!/usr/bin/env python
# -*- coding:utf-8 -*-
from fabric.api import run
#定义一个任务函数，通过run方法实现远程执行‘uname -s’命令
def host_type():
run('uname -s')
执行结果跟下面一样：
#直接在linux中执行命令。
[root@Fabric ~]# pwd
/root
[root@ansible ~]# fab -p 123456 -H localhost -- 'uname -s'
[localhost] Executing task '<remainder>'
[localhost] run: uname -s
[localhost] out: Linux
[localhost] out:
Done.
Disconnecting from localhost... done.
示例2：
[root@ansible ~]# fab -p 123wen -H localhost -- 'ifconfig'
[localhost] Executing task '<remainder>'
[localhost] run: ifconfig
[localhost] out: eth0 Link encap:Ethernet HWaddr 00:0C:29:A1:04:41
[localhost] out: inet addr:192.168.30.128 Bcast:192.168.30.255 Mask:255.255.255.0
[localhost] out: inet6 addr: fe80::20c:29ff:fea1:441/64 Scope:Link
[localhost] out: UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[localhost] out: RX packets:6079 errors:0 dropped:0 overruns:0 frame:0
[localhost] out: TX packets:3985 errors:0 dropped:0 overruns:0 carrier:0
[localhost] out: collisions:0 txqueuelen:1000
[localhost] out: RX bytes:563557 (550.3 KiB) TX bytes:449284 (438.7 KiB)
[localhost] out:
[localhost] out: lo Link encap:Local Loopback
[localhost] out: inet addr:127.0.0.1 Mask:255.0.0.0
[localhost] out: inet6 addr: ::1/128 Scope:Host
[localhost] out: UP LOOPBACK RUNNING MTU:65536 Metric:1
[localhost] out: RX packets:318 errors:0 dropped:0 overruns:0 frame:0
[localhost] out: TX packets:318 errors:0 dropped:0 overruns:0 carrier:0
[localhost] out: collisions:0 txqueuelen:0
[localhost] out: RX bytes:54589 (53.3 KiB) TX bytes:54589 (53.3 KiB)
[localhost] out:
[localhost] out:
Done.
Disconnecting from localhost... done.
fabfile文件的编写
fab命令是结合fabfile.py文件（其他文件通过-f filename 参数来引用）来搭配使用的。fab的部分命令行参数还能通过相应的方法来代替。
如：
fab -H 192.168.1.21,192.168.1.22 ... ...
#可以在fabfile.py文件中用env.hosts来实现，命令行中就可以不用写了
#可以在fabfile中这么写：
env.hosts = ['192.168.1.21','192.168.1.22']
三、fabfile之env对象
env对象的作用是定义fabfile的全局设定，就像上面的举例。下面对各属性进行说明：
env.hosts #定义目标主机，可以用IP或主机名表示，以python的列表形式定义。如env.hosts=['192.168.1.21','192.168.1.22']
env.exclude_hosts #排除指定主机，如env.exclude_hosts=['192.168.1.21']
env.user #定义用户名，如env.user='root'
env.port #定义端口，默认为22，如env.port='22'
env.password #定义密码，如env.password='123456'
env.passwords #定义多个密码，不同主机对应不同密码，如：env.passwords = {'[email protected]:22':'123456','[email protected]:22':'654321'}
env.gateway #定义网关（中转、堡垒机）IP，如env.gateway='192.168.1.23
env.roledefs #定义角色分组，比如web组合db组主机区分开来：env.roledefs = {'webserver':['192.168.1.21','192.168.1.22'],'dbserver':['192.168.1.25','192.168.1.26']}
env.deploy_release_dir #自定义全局变量，格式：env. + '变量名称'，如env.age,env.sex等
env.roledefs的使用方法实例：
env.roledefs = {'webserver':['192.168.1.21','192.168.1.22'],'dbserver':['192.168.1.25','192.168.1.26']}
#引用分组时使用python装饰器方式来进行,如：
@roles('webserver')
def webtask():
run('/usr/local/nginx/sbin/nginx')
@roles('webserver','dbserver')
def publictask():
run('uptime')
四、Fabric常用API
在上面的简单实例中使用了api函数run,下面再列举几个常用的api
local #执行本地命令，如local('uname -s')
lcd #切换本地目录，如lcd('/home')
cd #切换远程目录
run #执行远程命令
sudo #sudo方式执行远程命令，如sudo('/etc/init.d/httpd start')
put #上次本地文件导远程主机，如put('/home/user.info','/data/user.info')
get #从远程主机下载文件到本地，如：get('/data/user.info','/home/user.info')
prompt #获得用户输入信息，如：prompt('please input user password:')
confirm #获得提示信息确认，如：confirm('Test failed,Continue[Y/N]?')
reboot #重启远程主机，如：reboot()
@task #函数修饰符，标识的函数为fab可调用的，非标记对fab不可见，纯业务逻辑
@runs_once #函数修饰符，标识的函数只会执行一次，不受多台主机影响
Fabric应用示例说明
示例调用local方法执行本地命令，添加@runs_once修饰符保证任务函数只执行一次，调用run方法执行远程命令
#!/usr/bin/env python
# -*- encoding: utf-8 -*-
from fabric.api import *
env.user = 'root'
env.hosts = ['192.168.1.22']
env.password = '123456'
@runs_once #查看本地系统信息，当有多台主机时只运行一次
def local_task(): #本地任务函数
local('uname -a')
def remote_task():
with cd('/var/logs'): #with的作用是让后面的表达式语句继承当前状态，实现：cd /var/logs && ls -l的效果
run('ls -l')
simple1.py
执行：
fab -f simple1.py local_task
fab -f simple1.py remote_task
五、应用实例
实例一：
1.查看本地信息
本示例调用local()方法执行本地(主控端)命令，添加"@runs_once"修饰符保证该任务函数只执行一次。调用run()方法执行远程命令。
[devops@ansible ]$ pwd
/home/devops/devops
[devops@ansible ]$ cat simple1.py
#!/usr/bin/env python
from fabric.api import *
env.user = 'devops'
env.hosts = ['localhost']
env.password = '1234567'
@runs_once #查看本地系统信息，当有多台主机时只运行一次
def local_task(): #本地任务函数
local("uname -a")
通过fab命令调用local_task任务函数运行结果如下：
[devops@ansible ]$ fab -f simple1.py local_task
[localhost] Executing task 'local_task'
[localhost] local: uname -a
Linux devops-virtual-machine 4.15.0-20-generic #21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
Done.
2.查看远程主机信息
[devops@ansible ]$ cat simple2.py
#!/usr/bin/env python
from fabric.api import *
env.user = 'root'
env.hosts = ['192.168.56.11']
env.password = '1234567'
def remote_task():
with cd('/root'): #"with"的作用是让后面的表达式的语句继承当前状态，实现"cd /root/ && ls -l'的效果
run('ls -l')
调用remote_task任务函数运行结果如下：
[devops@ansible ]$ fab -f simple2.py remote_task
[192.168.33.11] Executing task 'remote_task'
[192.168.33.11] run: ls -l
[192.168.33.11] out: total 4
[192.168.33.11] out: -rw-------. 1 root root 1273 Feb 20 20:21 anaconda-ks.cfg
[192.168.33.11] out:
Done.
Disconnecting from 192.168.33.11... done.
示例二：动态获取远程目录列表
本示例使用"@task’修复符标志入口函数go()对外部可见，配合"@runs_once"修饰符接受用户输入，最后调用worktask()任务函数实现远程命令执行。
[devops@ansible ]$ cat simple3.py
#!/usr/bin/env python
from fabric.api import *
env.user = 'root'
env.hosts = ['192.168.33.11','192.168.33.12']
env.password = '1234567'
@runs_once #主机遍历过程中，只有第一台触发此函数
def input_raw():
return prompt("Please input directory name:",default="/home")
def worktask(dirname):
run("ls -l "+dirname)
@task #限定只有go函数对fab命令可见
def go():
getdirname = input_raw()
worktask(getdirname)
该示例实现了一个动态输入远程目录名称，再获取目录列表的功能，由于我们只要求输入一次，在显示所有主机上该目录的列表信息，调用一个子函数input_raw()同时配置@runs_once修复符来达到此目的。
执行结果如下：
[devops@ansible ]$ fab -f simple3.py go
[192.168.33.11] Executing task 'go'
Please input directory name: [/home] /root
[192.168.33.11] run: ls -l /root
[192.168.33.11] out: total 4
[192.168.33.11] out: -rw-------. 1 root root 1273 Feb 16 11:47 anaconda-ks.cfg
[192.168.33.11] out:
[192.168.33.12] Executing task 'go'
[192.168.33.12] run: ls -l /root
[192.168.33.12] out: total 4
[192.168.33.12] out: -rw-------. 1 root root 1273 Feb 16 11:59 anaconda-ks.cfg
[192.168.33.12] out:
Done.
Disconnecting from 192.168.33.11... done.
Disconnecting from 192.168.33.12... done.
示例三：网关模式文件上传与执行
本示例通过Fabric的env对象定义网关模式，即俗称的中转、堡垒机环境。定义格式为"env.gateway=‘192.168.33.11’",其中IP“192.168.33.11”为堡垒机IP，再结合任务函数实现目标主机文件上传与执行的操作。
[devops@ansible ]$ cat /home/devops/devops/simple4.py
#!/usr/bin/env python
from fabric.api import *
from fabric.context_managers import *
from fabric.contrib.console import confirm
env.user = 'root'
env.gateway = '192.168.33.11' #定义堡垒机IP，作为文件上传、执行的中转设备
env.hosts = ['192.168.33.12','192.168.33.13']
env.passwords = {
'[email protected]:22':'1234567', #堡垒机账号信息
'[email protected]:22':'1234567',
'[email protected]:22':'1234567'
}
l_pack_path = "/home/install/nginx-1.6.3.tar.gz" #本地安装包路径
r_pack_path = "/tmp/install" #远程安装包路径
@task
def put_task():
run("mkdir -p /tmp/install")
with settings(warn_only=True):
result = put(l_pack_path,r_pack_path) #上传安装包
if result.failed and not confirm("put file failed, Continue[Y/N]?"):
abort("Aborint file put task!")
@task
def run_task(): #执行远程命令，安装nginx
with cd(r_pack_path):
run("tar -xvf nginx-1.6.3.tar.gz")
with cd("nginx-1.6.3/"): #使用with继续继承/tmp/install目录位置状态
run("./nginx_install.sh")
@task
def go(): #上传、安装
put_task()
run_task()
执行命令fab -f simple4.py go。运行结果如下：
[devops@ansible ]$ fab -f simple4.py go
[192.168.33.12] Executing task 'go'
[192.168.33.12] run: mkdir -p /tmp/install
[192.168.33.12] put: /home/install/nginx-1.6.3.tar.gz -> /tmp/install/nginx-1.6.3.tar.gz
[192.168.33.12] run: tar -xvf nginx-1.6.3.tar.gz
.....
.....
.....
[192.168.33.12] out: cp conf/nginx.conf '/usr/local/nginx/conf/nginx.conf.default'
[192.168.33.12] out: test -d '/usr/local/nginx/logs' || mkdir -p '/usr/local/nginx/logs'
[192.168.33.12] out: test -d '/usr/local/nginx/logs' || mkdir -p '/usr/local/nginx/logs'
[192.168.33.12] out: test -d '/usr/local/nginx/html' || cp -R html '/usr/local/nginx'
[192.168.33.12] out: test -d '/usr/local/nginx/logs' || mkdir -p '/usr/local/nginx/logs'
[192.168.33.12] out: make[1]: Leaving directory `/tmp/install/nginx-1.6.3'
[192.168.33.12] out: nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
[192.168.33.12] out: nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful
[192.168.33.12] out:
[192.168.33.13] Executing task 'go'
[192.168.33.13] run: mkdir -p /tmp/install
[192.168.33.13] put: /home/install/nginx-1.6.3.tar.gz -> /tmp/install/nginx-1.6.3.tar.gz
[192.168.33.13] run: tar -xvf nginx-1.6.3.tar.gz
....
....
....
[192.168.33.13] out: cp conf/nginx.conf '/usr/local/nginx/conf/nginx.conf.default'
[192.168.33.13] out: test -d '/usr/local/nginx/logs' || mkdir -p '/usr/local/nginx/logs'
[192.168.33.13] out: test -d '/usr/local/nginx/logs' || mkdir -p '/usr/local/nginx/logs'
[192.168.33.13] out: test -d '/usr/local/nginx/html' || cp -R html '/usr/local/nginx'
[192.168.33.13] out: test -d '/usr/local/nginx/logs' || mkdir -p '/usr/local/nginx/logs'
[192.168.33.13] out: make[1]: Leaving directory `/tmp/install/nginx-1.6.3'
[192.168.33.13] out: nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
[192.168.33.13] out: nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful
[192.168.33.13] out:
Done.
Disconnecting from 192.168.33.11... done.
Disconnecting from 192.168.33.12... done.
Disconnecting from 192.168.33.13... done.
运行结果,默认为串行运行
执行命令fab -Pf simple4.py go。运行结果如下：
[devops@ansible ]$ fab -Pf simple4.py go
[192.168.33.12] Executing task 'go'
[192.168.33.13] Executing task 'go'
[192.168.33.12] run: mkdir -p /tmp/install
[192.168.33.13] run: mkdir -p /tmp/install
[192.168.33.12] put: /home/install/nginx-1.6.3.tar.gz -> /tmp/install/nginx-1.6.3.tar.gz
[192.168.33.13] put: /home/install/nginx-1.6.3.tar.gz -> /tmp/install/nginx-1.6.3.tar.gz
[192.168.33.12] run: tar -xvf nginx-1.6.3.tar.gz
....
....
....
[192.168.33.12] out: nginx-1.6.3/html/index.html
[192.168.33.12] out: nginx-1.6.3/README
[192.168.33.12] out: nginx-1.6.3/nginx_install.sh
[192.168.33.12] out: nginx-1.6.3/configure
[192.168.33.12] out:
[192.168.33.12] run: ./nginx_install.sh
[192.168.33.13] run: tar -xvf nginx-1.6.3.tar.gz
[192.168.33.13] out: nginx-1.6.3/
[192.168.33.13] out: nginx-1.6.3/src/
....
....
....
[192.168.33.12] out: make[1]: Leaving directory `/tmp/install/nginx-1.6.3'
[192.168.33.12] out: nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
[192.168.33.12] out: nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful
[192.168.33.12] out:
....
....
...
[192.168.33.13] out: make[1]: Leaving directory `/tmp/install/nginx-1.6.3'
[192.168.33.13] out: nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
[192.168.33.13] out: nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful
[192.168.33.13] out:
加P参数该为异步并行执行，运行结果
示例四：文件打包、上传与校验
我们时常做一些文件包分发的工作，实施步骤一般是先压缩打包，在批量上传至目标服务器，最后做一致性校验。本示例通过put()方法实现文件的上传，通过对比本地与远程主机文件的md5，最终实现文件一致性校验。
[devops@ansible ]$ cat simple5.py
#!/usr/bin/env python
from fabric.api import *
from fabric.context_managers import *
from fabric.contrib.console import confirm
env.user = 'root'
env.hosts = ['192.168.33.12','192.168.33.13']
env.passwords = {
'[email protected]:22':'1234567',
'[email protected]:22':'1234567',
}
@runs_once
def tar_task(): #本地打包任务函数，只执行一次
with lcd('/home/devops/devops'):
local("tar -zcf devops.tar.gz *")
@task
def put_task(): #上传文件任务函数
run("mkdir -p /root/devops")
with cd("/root/devops"):
with settings(warn_only=True): #put(上传)出现异常时继续执行，非终止
result = put("/home/devops/devops/devops.tar.gz","/root/devops/devops.tar.gz")
if result.failed and not confirm("put file failed.Continue[Y/N]?"):
abort("Aborting file put task!") #出现异常时，确认用户是否继续，(Y继续)
@task
def check_task(): #校验文件任务函数
with settings(warn_only=True):
#本地local命令需要配置capture=True才能捕获返回值
lmd5 = local("md5sum /home/devops/devops/devops.tar.gz",capture=True).split(' ')[0]
rmd5 = run("md5sum /root/devops/devops.tar.gz").split(' ')[0]
if lmd5 == rmd5: #对比本地及远程文件md5信息
prompt("OK")
else:
prompt("ERROR")
@task
def go():
tar_task()
put_task()
check_task()
执行命令fab -f simple5.py go。运行结果如下：(此程序不支持-P参数并行执行、如需并行执行，程序需要做调整)
[devops@ansible ]$ fab -f simple5.py go
[192.168.33.12] Executing task 'go'
[localhost] local: tar -zcf devops.tar.gz *
[192.168.33.12] run: mkdir -p /root/devops
[192.168.33.12] put: /home/devops/devops/devops.tar.gz -> /root/devops/devops.tar.gz
[localhost] local: md5sum /home/devops/devops/devops.tar.gz
[192.168.33.12] run: md5sum /root/devops/devops.tar.gz
[192.168.33.12] out: a1cf2be82647cbed0d41514bd80373de /root/devops/devops.tar.gz
[192.168.33.12] out:
OK
[192.168.33.13] Executing task 'go'
[192.168.33.13] run: mkdir -p /root/devops
[192.168.33.13] put: /home/devops/devops/devops.tar.gz -> /root/devops/devops.tar.gz
[localhost] local: md5sum /home/devops/devops/devops.tar.gz
[192.168.33.13] run: md5sum /root/devops/devops.tar.gz
[192.168.33.13] out: a1cf2be82647cbed0d41514bd80373de /root/devops/devops.tar.gz
[192.168.33.13] out:
OK
Done.
Disconnecting from 192.168.33.12... done.
Disconnecting from 192.168.33.13... done.
示例五：部署LNMP业务服务环境
本示例通过env.roledefs定义不同主机角色，在使用"@roles(‘webservers’)"修复符绑定到对应的任务函数，实现不同角色主机的部署差异。
[devops@ansible ]$ cat simple6.py
#!/usr/bin/env python
from fabric.colors import *
from fabric.api import *
env.user = 'root'
env.roledefs = {
'webservers':['192.168.33.11','192.168.33.12'],
'dbservers':['192.168.33.13']
}
env.passwords = {
'[email protected]:22':'1234567',
'[email protected]:22':'1234567',
'[email protected]:22':'1234567',
}
@roles('webservers') #使用webtask任务函数引用'webservers'角色修复符
def webtask():
print(yellow('Install nginx php php-fpm...'))
with settings(warn_only=True):
run("yum -y install nginx")
run("yum -y install php-fpm php-mysql php-mbstring php-xml php-mcrypt php-gd")
run("chkconfig --levels 235 php-fpm on")
run("chkconfig --levels 235 nginx on")
@roles('dbservers') #dbtask任务函数引用'dbservers'角色修复符
def dbtask():
print(yellow("Install Mysql..."))
with settings(warn_only=True):
run("yum -y install mysql mysql-server")
run("chkconfig --levels 235 mysqld on")
@roles('webservers','dbservers') #publictask任务函数同时引用两个角色修复符
def publictask(): #部署公共类环境，如epel、ntp等
print(yellow("Install epel ntp...."))
with settings(warn_only=True):
run("wget -O /etc/yum.repos.d/epel.repo http://mirrors.aliyun.com/repo/epel-7.repo")
run("yum -y install ntp")
def deploy():
execute(publictask)
execute(webtask)
execute(dbtask)
执行命令fab -Pf simple6.py deploy
[devops@ansible ]$ fab -Pf simple6.py deploy
[192.168.33.11] Executing task 'publictask'
[192.168.33.12] Executing task 'publictask'
[192.168.33.13] Executing task 'publictask'
Install epel ntp....
[192.168.33.13] run: wget -O /etc/yum.repos.d/epel.repo http://mirrors.aliyun.com/repo/epel-7.repo
Install epel ntp....
[192.168.33.12] run: wget -O /etc/yum.repos.d/epel.repo http://mirrors.aliyun.com/repo/epel-7.repo
Install epel ntp....
[192.168.33.11] run: wget -O /etc/yum.repos.d/epel.repo http://mirrors.aliyun.com/repo/epel-7.repo
[192.168.33.12] out: --2018-06-23 20:32:30-- http://mirrors.aliyun.com/repo/epel-7.repo
[192.168.33.11] out: --2018-06-23 20:32:30-- http://mirrors.aliyun.com/repo/epel-7.repo
[192.168.33.13] out: --2018-06-23 20:32:30-- http://mirrors.aliyun.com/repo/epel-7.repo
....
[192.168.33.13] run: yum -y install ntp
[192.168.33.12] run: yum -y install ntp
[192.168.33.11] run: yum -y install ntp
....
....
....
[192.168.33.11] Executing task 'webtask'
[192.168.33.12] Executing task 'webtask'
Install nginx php php-fpm...
[192.168.33.11] run: yum -y install nginx
Install nginx php php-fpm...
[192.168.33.12] run: yum -y install nginx
....
....
....
[192.168.33.13] Executing task 'dbtask'
Install Mysql...
[192.168.33.13] run: rpm -ivh http://dev.mysql.com/get/mysql-community-release-el6-5.noarch.rpm
.....
.....
.....
[192.168.33.13] run: chkconfig --levels 235 mysqld on
Done.
示例六：生产环境代码包发布管理
程序生产环境的发布是业务上线的最后一个环境，要求具备源码打包、发布、切换、回滚、版本管理等功能。本示例实现了这一套流程功能，其中版本切换与回滚使用了Linux下的软链接实现。
#!/usr/local/env python
from fabric.api import *
from fabric.colors import *
from fabric.context_managers import *
from fabric.contrib.console import confirm
import time
env.user = 'root'
env.host = ['192.168.33.12','192.168.33.13']
env.passwords = {
'[email protected]:22':'1234567',
'[email protected]:22':'1234567',
}
env.project_dev_source = '/data/dev/Lwebadmin/' #开发服务器项目主目录
env.project_tar_source = '/data/dev/releases/' #开发服务器项目压缩包存储目录
env.project_pack_name = 'release' #项目压缩包前缀，文件名为release.tar.gz
env.deploy_project_root = '/data/www/Lwebadmin/' #项目生产环境主目录
env.deploy_release_dir = 'releases' #项目发布目录，位于主目录下面
env.deploy_current_dir = 'current' #对外服务的当前版本软链接
env.deploy_version = time.strftime("%Y%m%d")+"v2" #版本号
@runs_once
def input_versionid(): #获得用户输入的版本号，以便做版本回滚操作
return prompt("Please input project rollback version ID:",default="")
@task
@runs_once
def tar_source(): #打包本地项目主目录，并将压缩包存储到本地压缩包目录
prompt(yellow("Creating source package...."))
with lcd(env.project_dev_source):
local("tar -zcf %s.tar.gz ." %(env.project_tar_source + env.project_pack_name))
prompt(green("Creating source package success!"))
@task
def put_package(): #上传任务函数
prompt(yellow("Start put package...."))
with settings(warn_only=True):
with cd(env.deploy_project_root + env.deploy_release_dir):
run("mkdir %s" %(env.deploy_version)) #创建版本目录
env.deploy_full_path = env.deploy_project_root + env.deploy_release_dir + "/" + env.deploy_version
with settings(warn_only=True): #上传项目压缩包至此目录
result = put(env.project_tar_source + env.project_pack_name + ".tar.gz",env.deploy_full_path)
if result.failed and not ("put file failed,Continue[Y/N]?"):
abort("Aborting file put task!")
with cd(env.deploy_full_path): #成功解压后删除压缩包
run("tar -zxvf %s.tar.gz" %(env.project_pack_name))
run("rm -rf %s.tar.gz" %(env.project_pack_name))
print(green("Put & untar package success!"))
@task
def make_symlink(): #为当前版本目录做软链接
print(yellow("update current symlink"))
env.deploy_full_path = env.deploy_project_root + env.deploy_release_dir + "/" + env.deploy_version
with settings(warn_only=True): #删除软链接，重新创建并指定软链接源目录，新版本生效
run("rm -rf %s" %(env.deploy_project_root + env.deploy_current_dir))
run("ln -s %s %s" %(env.deploy_full_path,env.deploy_project_root + env.deploy_current_dir))
print(green("make symlink success!"))
@task
def rollback(): #版本回滚任务函数
print(yellow("rollback project version"))
versionid = input_versionid() #获取用户输入的回滚版本号
if versionid == '':
abort("Project version ID error,abort!")
env.deploy_full_path = env.deploy_project_root + env.deploy_release_dir + "/" + versionid
run("rm -r %s" %(env.deploy_project_root + env.deploy_current_dir))
run("ln -s %s %s" %(env.deploy_full_path,env.deploy_project_root + env.deploy_current_dir)) #删除软链接，重新创建并指定软链接源目录，新版本生效
print(green("rollback sucess!"))
@task
def go(): #自动化程序版本发布入口函数
tar_source()
put_package()
make_symlink()