文章目录

Docker下部署Consul集群和ACL权限配置

规划与准备

本次计划部署的consul集群有3个节点，都是server类型

容器IP	节点	类型
172.17.0.2	server1	server
172.17.0.3	server2	server
172.17.0.4	server3	server

把consul的数据文件都映射到宿主机上，有利于备份数据以及方便以后重构容器。
宿主机建立目录server1、server2、server3，下面分别存放3个consul节点的信息：

[root@wuli-centOS7 ~]# mkdir -p /data/consul/server1/config
[root@wuli-centOS7 ~]# mkdir -p /data/consul/server1/data
[root@wuli-centOS7 ~]# mkdir -p /data/consul/server1/log

[root@wuli-centOS7 ~]# mkdir -p /data/consul/server2/config
[root@wuli-centOS7 ~]# mkdir -p /data/consul/server2/data
[root@wuli-centOS7 ~]# mkdir -p /data/consul/server2/log

[root@wuli-centOS7 ~]# mkdir -p /data/consul/server3/config
[root@wuli-centOS7 ~]# mkdir -p /data/consul/server3/data
[root@wuli-centOS7 ~]# mkdir -p /data/consul/server3/log

搭建Consul集群

创建server1配置文件，启动server1节点

创建server1的配置文件：

[root@wuli-centOS7 ~]# vim /data/consul/server1/config/config.json

{
    "datacenter": "dc1",
    "bootstrap_expect": 3,
    "data_dir": "/consul/data",
    "log_file": "/consul/log/",
    "log_level": "INFO",
    "node_name": "consul_server_1",
    "client_addr": "0.0.0.0",
    "server": true,
    "ui": true,
    "enable_script_checks": true,
    "addresses": {
        "https": "0.0.0.0",
        "dns": "0.0.0.0"
    }
}

启动节点consul_server_1

[root@wuli-centOS7 ~]# docker run -d -p 8510:8500 -v /data/consul/server1/data:/consul/data -v /data/consul/server1/config:/consul/config -e CONSUL_BIND_INTERFACE='eth0' --privileged=true --name=consul_server_1 consul agent -data-dir=/consul/data;

docker run命令说明：

Environment Variable（环境变量）：
CONSUL_BIND_INTERFACE=eth0：在容器启动时，自动绑定eth0端口的IP地址
docker参数：
-e：将时区信息传入到容器内部
-d：Daemon模式
-p：绑定端口
–privileged：表示以root权限运行
–name：指定实例名称
consul：consul启动命令

启动后，因为配置了bootstrap_expect=3，但只启动了一个server，所以会报错：没有集群领导者

[root@wuli-centOS7 ~]# docker exec consul_server_1 consul monitor
2020-05-03T18:01:40.453Z [ERROR] agent.anti_entropy: failed to sync remote state: error="No cluster leader"
2020-05-03T18:01:57.802Z [ERROR] agent: Coordinate update error: error="No cluster leader"

创建server2配置文件，启动server2节点

创建server2的配置文件：

[root@wuli-centOS7 ~]# vim /data/consul/server2/config/config.json

{
    "datacenter": "dc1",
    "bootstrap_expect": 3,
    "data_dir": "/consul/data",
    "log_file": "/consul/log/",
    "log_level": "INFO",
    "node_name": "consul_server_2",
    "client_addr": "0.0.0.0",
    "server": true,
    "ui": true,
    "enable_script_checks": true,
    "addresses": {
        "https": "0.0.0.0",
        "dns": "0.0.0.0"
    }
}

启动节点consul_server_2

[root@wuli-centOS7 ~]# docker run -d -p 8520:8500 -v /data/consul/server2/data:/consul/data -v /data/consul/server2/config:/consul/config -e CONSUL_BIND_INTERFACE='eth0' --privileged=true --name=consul_server_2 consul agent -data-dir=/consul/data;

创建server3配置文件，启动server3节点

创建server3的配置文件：

[root@wuli-centOS7 ~]# vim /data/consul/server3/config/config.json

{
    "datacenter": "dc1",
    "bootstrap_expect": 3,
    "data_dir": "/consul/data",
    "log_file": "/consul/log/",
    "log_level": "INFO",
    "node_name": "consul_server_3",
    "client_addr": "0.0.0.0",
    "server": true,
    "ui": true,
    "enable_script_checks": true,
    "addresses": {
        "https": "0.0.0.0",
        "dns": "0.0.0.0"
    }
}

启动节点consul_server_3

[root@wuli-centOS7 ~]# docker run -d -p 8530:8500 -v /data/consul/server3/data:/consul/data -v /data/consul/server3/config:/consul/config -e CONSUL_BIND_INTERFACE='eth0' --privileged=true --name=consul_server_3 consul agent -data-dir=/consul/data;

加入集群

查看节点server2、server3的IP，然后通过join命令把全部节点加入集群

[root@wuli-centOS7 ~]# docker inspect --format '{{ .NetworkSettings.IPAddress }}' consul_server_2
172.17.0.3
[root@wuli-centOS7 ~]# docker inspect --format '{{ .NetworkSettings.IPAddress }}' consul_server_3
172.17.0.4

[root@wuli-centOS7 ~]# docker exec consul_server_1 consul join 172.17.0.3
[root@wuli-centOS7 ~]# docker exec consul_server_1 consul join 172.17.0.4

查看后台日志：

[root@wuli-centOS7 ~]# docker exec consul_server_1 consul monitor
2020-05-03T19:04:39.254Z [INFO]  agent: (LAN) joining: lan_addresses=[172.17.0.3]
2020-05-03T19:04:39.260Z [INFO]  agent.server.serf.lan: serf: EventMemberJoin: consul_server_2 172.17.0.3
2020-05-03T19:04:39.261Z [INFO]  agent: (LAN) joined: number_of_nodes=1
2020-05-03T19:04:39.261Z [INFO]  agent.server: Adding LAN server: server="consul_server_2 (Addr: tcp/172.17.0.3:8300) (DC: dc1)"
2020-05-03T19:04:39.265Z [INFO]  agent.server.serf.wan: serf: EventMemberJoin: consul_server_2.dc1 172.17.0.3
2020-05-03T19:04:39.266Z [INFO]  agent.server: Handled event for server in area: event=member-join server=consul_server_2.dc1 area=wan
2020-05-03T19:04:40.362Z [ERROR] agent: Coordinate update error: error="No cluster leader"
2020-05-03T19:04:44.019Z [INFO]  agent: (LAN) joining: lan_addresses=[172.17.0.4]
2020-05-03T19:04:44.021Z [INFO]  agent.server.serf.lan: serf: EventMemberJoin: consul_server_3 172.17.0.4
2020-05-03T19:04:44.021Z [INFO]  agent: (LAN) joined: number_of_nodes=1
2020-05-03T19:04:44.022Z [INFO]  agent.server: Adding LAN server: server="consul_server_3 (Addr: tcp/172.17.0.4:8300) (DC: dc1)"
2020-05-03T19:04:44.027Z [INFO]  agent.server: Found expected number of peers, attempting bootstrap: peers=172.17.0.2:8300,172.17.0.3:8300,172.17.0.4:8300
2020-05-03T19:04:44.049Z [INFO]  agent.server.serf.wan: serf: EventMemberJoin: consul_server_3.dc1 172.17.0.4
2020-05-03T19:04:44.049Z [INFO]  agent.server: Handled event for server in area: event=member-join server=consul_server_3.dc1 area=wan
2020-05-03T19:04:48.088Z [WARN]  agent.server.raft: heartbeat timeout reached, starting election: last-leader=
2020-05-03T19:04:48.088Z [INFO]  agent.server.raft: entering candidate state: node="Node at 172.17.0.2:8300 [Candidate]" term=2
2020-05-03T19:04:48.100Z [INFO]  agent.server.raft: election won: tally=2
2020-05-03T19:04:48.101Z [INFO]  agent.server.raft: entering leader state: leader="Node at 172.17.0.2:8300 [Leader]"
2020-05-03T19:04:48.101Z [INFO]  agent.server.raft: added peer, starting replication: peer=78293668-16a6-1de0-673f-455d594e7447
2020-05-03T19:04:48.101Z [INFO]  agent.server.raft: added peer, starting replication: peer=0b6169d8-7acc-ed24-682f-56ffd12b486c
2020-05-03T19:04:48.102Z [INFO]  agent.server: cluster leadership acquired
2020-05-03T19:04:48.103Z [INFO]  agent.server: New leader elected: payload=consul_server_1
2020-05-03T19:04:48.104Z [WARN]  agent.server.raft: appendEntries rejected, sending older logs: peer="{Voter 78293668-16a6-1de0-673f-455d594e7447 172.17.0.3:8300}" next=1
2020-05-03T19:04:48.107Z [INFO]  agent.server.raft: pipelining replication: peer="{Voter 0b6169d8-7acc-ed24-682f-56ffd12b486c 172.17.0.4:8300}"
2020-05-03T19:04:48.112Z [INFO]  agent.server.raft: pipelining replication: peer="{Voter 78293668-16a6-1de0-673f-455d594e7447 172.17.0.3:8300}"
2020-05-03T19:04:48.120Z [INFO]  agent.server: Cannot upgrade to new ACLs: leaderMode=0 mode=0 found=true leader=172.17.0.2:8300
2020-05-03T19:04:48.129Z [INFO]  agent.leader: started routine: routine="CA root pruning"
2020-05-03T19:04:48.129Z [INFO]  agent.server: member joined, marking health alive: member=consul_server_1
2020-05-03T19:04:48.146Z [INFO]  agent.server: member joined, marking health alive: member=consul_server_2
2020-05-03T19:04:48.156Z [INFO]  agent.server: member joined, marking health alive: member=consul_server_3
2020-05-03T19:04:48.720Z [INFO]  agent: Synced node info

查看成员

[root@wuli-centOS7 ~]# docker exec consul_server_1 consul members
Node             Address          Status  Type    Build  Protocol  DC   Segment
consul_server_1  172.17.0.2:8301  alive   server  1.7.2  2         dc1  <all>
consul_server_2  172.17.0.3:8301  alive   server  1.7.2  2         dc1  <all>
consul_server_3  172.17.0.4:8301  alive   server  1.7.2  2         dc1  <all>

查看集群的选举情况，领导者为哪个节点等信息

[root@wuli-centOS7 ~]# docker exec consul_server_1 consul operator raft list-peers    
Node             ID                                    Address          State     Voter  RaftProtocol
consul_server_1  0214e0b9-04fe-e8ad-c855-b5091dfc8e2e  172.17.0.2:8300  leader    true   3
consul_server_2  78293668-16a6-1de0-673f-455d594e7447  172.17.0.3:8300  follower  true   3
consul_server_3  0b6169d8-7acc-ed24-682f-56ffd12b486c  172.17.0.4:8300  follower  true   3

访问ui，节点正常，标星的节点表示是leader

验证Consul集群选举机制

Consul中只有server节点会参与Raft算法并且作为peer set中的一部分。Raft中的节点总是处于以下三种状态之一: follower、candidate或leader。目前server1是leader，我们下面重启consul_server_1容器，观察consul集群变化情况。

重启consul_server_1

[root@wuli-centOS7 ~]# docker restart consul_server_1

观察server2和server3的日志，consul_server_2后台日志：

[root@wuli-centOS7 ~]# docker exec consul_server_2 consul monitor
2020-05-03T19:26:29.564Z [INFO]  agent.server.memberlist.lan: memberlist: Suspect consul_server_1 has failed, no acks received
2020-05-03T19:26:30.533Z [INFO]  agent.server.serf.wan: serf: EventMemberUpdate: consul_server_1.dc1
2020-05-03T19:26:30.533Z [INFO]  agent.server: Handled event for server in area: event=member-update server=consul_server_1.dc1 area=wan
2020-05-03T19:26:30.564Z [INFO]  agent.server.serf.lan: serf: EventMemberUpdate: consul_server_1
2020-05-03T19:26:30.565Z [INFO]  agent.server: Updating LAN server: server="consul_server_1 (Addr: tcp/172.17.0.2:8300) (DC: dc1)"
2020-05-03T19:26:33.542Z [WARN]  agent.server.raft: rejecting vote request since we have a leader: from=172.17.0.4:8300 leader=172.17.0.2:8300
2020-05-03T19:26:33.565Z [INFO]  agent.server: New leader elected: payload=consul_server_3

consul_server_3后台日志：

[root@wuli-centOS7 ~]# docker exec consul_server_3 consul monitor
2020-05-03T19:26:28.151Z [ERROR] agent.server.memberlist.lan: memberlist: Push/Pull with consul_server_1 failed: dial tcp 172.17.0.2:8301: connect: connection refused
2020-05-03T19:26:30.235Z [INFO]  agent.server.memberlist.lan: memberlist: Suspect consul_server_1 has failed, no acks received
2020-05-03T19:26:30.420Z [ERROR] agent: Coordinate update error: error="rpc error making call: stream closed"
2020-05-03T19:26:30.536Z [INFO]  agent.server.serf.wan: serf: EventMemberUpdate: consul_server_1.dc1
2020-05-03T19:26:30.536Z [INFO]  agent.server: Handled event for server in area: event=member-update server=consul_server_1.dc1 area=wan
2020-05-03T19:26:30.729Z [INFO]  agent.server.serf.lan: serf: EventMemberUpdate: consul_server_1
2020-05-03T19:26:30.729Z [INFO]  agent.server: Updating LAN server: server="consul_server_1 (Addr: tcp/172.17.0.2:8300) (DC: dc1)"
2020-05-03T19:26:32.234Z [WARN]  agent.server.memberlist.wan: memberlist: Was able to connect to consul_server_1.dc1 but other probes failed, network may be misconfigured
2020-05-03T19:26:33.536Z [WARN]  agent.server.raft: heartbeat timeout reached, starting election: last-leader=172.17.0.2:8300
2020-05-03T19:26:33.536Z [INFO]  agent.server.raft: entering candidate state: node="Node at 172.17.0.4:8300 [Candidate]" term=3
2020-05-03T19:26:33.546Z [INFO]  agent.server.raft: election won: tally=2
2020-05-03T19:26:33.546Z [INFO]  agent.server.raft: entering leader state: leader="Node at 172.17.0.4:8300 [Leader]"
2020-05-03T19:26:33.546Z [INFO]  agent.server.raft: added peer, starting replication: peer=0214e0b9-04fe-e8ad-c855-b5091dfc8e2e
2020-05-03T19:26:33.546Z [INFO]  agent.server.raft: added peer, starting replication: peer=78293668-16a6-1de0-673f-455d594e7447
2020-05-03T19:26:33.547Z [INFO]  agent.server: cluster leadership acquired
2020-05-03T19:26:33.548Z [INFO]  agent.server: New leader elected: payload=consul_server_3
2020-05-03T19:26:33.550Z [INFO]  agent.server.raft: pipelining replication: peer="{Voter 78293668-16a6-1de0-673f-455d594e7447 172.17.0.3:8300}"
2020-05-03T19:26:33.551Z [INFO]  agent.server.raft: pipelining replication: peer="{Voter 0214e0b9-04fe-e8ad-c855-b5091dfc8e2e 172.17.0.2:8300}"
2020-05-03T19:26:33.554Z [INFO]  agent.server: Cannot upgrade to new ACLs: leaderMode=0 mode=0 found=true leader=172.17.0.4:8300
2020-05-03T19:26:33.555Z [INFO]  agent.leader: started routine: routine="CA root pruning"

consul_server_1重启后，查看领导者，此时consul_server_3已被推选为领导者：

[root@wuli-centOS7 ~]# docker exec -it consul_server_1 consul operator raft list-peers
Node             ID                                    Address          State     Voter  RaftProtocol
consul_server_3  0b6169d8-7acc-ed24-682f-56ffd12b486c  172.17.0.4:8300  leader    true   3
consul_server_1  0214e0b9-04fe-e8ad-c855-b5091dfc8e2e  172.17.0.2:8300  follower  true   3
consul_server_2  78293668-16a6-1de0-673f-455d594e7447  172.17.0.3:8300  follower  true   3

配置join参数，节点自动加入集群

在Consul集群中，一个节点优雅退出，不会影响到集群中其他节点的正常运行，而集群的数据中心会把离开的节点标志为left状态，等到该节点重新加入集群，状态会变为alive，默认情况下，数据中心会保留离开节点信息72小时，72小时候后如果仍然没有加入集群，则会把该节点的信息移除掉。

server节点退出集群

下面演示节点退出的情况：

consul_server_2优雅退出

[root@wuli-centOS7 ~]# docker exec consul_server_2 consul leave
Graceful leave complete

查看成员状态，

[root@wuli-centOS7 ~]# docker exec consul_server_1 consul members
Node             Address          Status  Type    Build  Protocol  DC   Segment
consul_server_1  172.17.0.2:8301  alive   server  1.7.2  2         dc1  <all>
consul_server_2  172.17.0.3:8301  left    server  1.7.2  2         dc1  <all>
consul_server_3  172.17.0.4:8301  alive   server  1.7.2  2         dc1  <all>

查看leader

[root@wuli-centOS7 ~]# docker exec consul_server_1 consul operator raft list-peers
Node             ID                                    Address          State     Voter  RaftProtocol
consul_server_3  0b6169d8-7acc-ed24-682f-56ffd12b486c  172.17.0.4:8300  leader    true   3
consul_server_1  0214e0b9-04fe-e8ad-c855-b5091dfc8e2e  172.17.0.2:8300  follower  true   3

查看后台日志，没有报错，访问ui正常，说明配置文件的bootstrap_expect=3，只是在创建集群的时候期待的节点数量，如果达不到就不会初次创建集群，但节点数据量达到3后，集群初次创建成功，后面如果server通过优雅退出，不影响集群的健康情况，集群仍然会正常运行，而优雅退出的集群的状态会标志为“left”。

重新启动consul_server_2后，不会自动加入集群，因为配置文件没有start_join和retry_join参数，需要通过命令consul join加入集群，通过consul_server_2或者集群中的其他server发起命令都可以：

[root@wuli-centOS7 ~]# docker exec consul_server_2 consul join 172.17.0.2
Successfully joined cluster by contacting 1 nodes.

或者：

[root@wuli-centOS7 ~]# docker exec consul_server_1 consul join 172.17.0.3
Successfully joined cluster by contacting 1 nodes.

节点自动加入集群

全部server的配置文件添加start_join和retry_join参数，可以在重启后自动集群。

参看各个server的ip：

[root@wuli-centOS7 server4]# docker inspect --format '{{ .NetworkSettings.IPAddress }}' consul_server_1
172.17.0.2
[root@wuli-centOS7 server4]# docker inspect --format '{{ .NetworkSettings.IPAddress }}' consul_server_2
172.17.0.3
[root@wuli-centOS7 server4]# docker inspect --format '{{ .NetworkSettings.IPAddress }}' consul_server_3
172.17.0.4

分别编辑各个server的配置文件

[root@wuli-centOS7 ~]# vim /data/consul/server1/config/config.json

{
    "datacenter": "dc1",
    "bootstrap_expect": 3,
    "data_dir": "/consul/data",
    "log_file": "/consul/log/",
    "log_level": "INFO",
    "node_name": "consul_server_3",
    "client_addr": "0.0.0.0",
    "server": true,
    "ui": true,
    "enable_script_checks": true,
    "addresses": {
        "https": "0.0.0.0",
        "dns": "0.0.0.0"
    },
    "start_join":[
        "172.17.0.2",
        "172.17.0.3",
        "172.17.0.4"
    ],
    "retry_join":[
        "172.17.0.2",
        "172.17.0.3",
        "172.17.0.4"
    ]
}

重载配置文件，验证配置是否正确

[root@wuli-centOS7 ~]# docker exec consul_server_1 consul reload   
Configuration reload triggered

配置正确，以后重启consul server，或者优雅退出后再启动，会自动加入集群，无需使用命令join。

节点之间加入通讯密钥

增加通讯密钥，可以防止其他节点加入集群。步骤如下：

使用consul keygen命令生成通讯密钥

[root@wuli-centOS7 ~]# docker exec consul_server_1 consul keygen
zVCGFgICqf5MAU61Wd/1wDP1hoQ37rQQFVvMkhzpM1c=

把密钥信息分别写入3个server的配置文件中

[root@wuli-centOS7 ~]# vim /data/consul/server1/config/config.json

{   
    "datacenter": "dc1",
    "bootstrap_expect": 3,
    "data_dir": "/consul/data",
    "log_file": "/consul/log/",
    "log_level": "INFO",
    "node_name": "consul_server_1",
    "client_addr": "0.0.0.0",
    "server": true,
    "ui": true,
    "enable_script_checks": true,
    "addresses": {
        "https": "0.0.0.0",
        "dns": "0.0.0.0"
    },
    "encrypt": "zVCGFgICqf5MAU61Wd/1wDP1hoQ37rQQFVvMkhzpM1c="
}

consul重新加载配置文件

[root@wuli-centOS7 ~]# docker exec consul_server_1 consul reload
Configuration reload triggered

实验中，发现重载配置文件后，其他节点仍然可以加入集群，需要重新启动consul

[root@wuli-centOS7 ~]# docker restart consul_server_1
consul_server_1

[root@wuli-centOS7 ~]# docker restart consul_server_2
consul_server_2

[root@wuli-centOS7 ~]# docker restart consul_server_3
consul_server_3

后面如果有新的节点，要加入集群中，必须提供encrypt才行。

再创建一个节点server4，尝试加入有密钥的集群：
5.1 创建配置配置文件：

[root@wuli-centOS7 ~]# vim /data/consul/server4/config/config.json

{
    "datacenter": "dc1",
    "bootstrap_expect": 1,
    "data_dir": "/consul/data",
    "log_file": "/consul/log/",
    "log_level": "INFO",
    "node_name": "consul_server_4",
    "client_addr": "0.0.0.0",
    "server": true,
    "ui": true,
    "enable_script_checks": true,
    "addresses": {
        "https": "0.0.0.0",
        "dns": "0.0.0.0"
    }
}

5.2 启动server4

[root@wuli-centOS7 ~]# docker run -d -p 8540:8500 -v /data/consul/server4/data:/consul/data -v /data/consul/server4/config:/consul/config -e CONSUL_BIND_INTERFACE='eth0' --privileged=true --name=consul_server_4 consul agent -data-dir=/consul/data;
cdf6edee727f92baf2f7d324cb9522644c851f81fe62356fb2fb9aad126eaf13

5.3 尝试加入集群，失败：

[root@wuli-centOS7 ~]# docker exec consul_server_4 consul join 172.17.0.2         
Error joining address '172.17.0.2': Unexpected response code: 500 (1 error occurred:
        * Failed to join 172.17.0.2: Remote state is encrypted and encryption is not configured

)
Failed to join any nodes.

5.4 在配置文件中加入通讯密钥

[root@wuli-centOS7 ~]# vim /data/consul/server4/config/config.json

{
    "datacenter": "dc1",
    "bootstrap_expect": 1,
    "data_dir": "/consul/data",
    "log_file": "/consul/log/",
    "log_level": "INFO",
    "node_name": "consul_server_4",
    "client_addr": "0.0.0.0",
    "server": true,
    "ui": true,
    "enable_script_checks": true,
    "addresses": {
        "https": "0.0.0.0",
        "dns": "0.0.0.0"
    },
    "encrypt": "zVCGFgICqf5MAU61Wd/1wDP1hoQ37rQQFVvMkhzpM1c="
}

5.5 重载配置文件，然后尝试加入集群，仍然失败，说明添加密钥都需要重启consul才生效

[root@wuli-centOS7 ~]# docker exec consul_server_4 consul reload
Configuration reload triggered

[root@wuli-centOS7 ~]# docker exec consul_server_4 consul join 172.17.0.2
Error joining address '172.17.0.2': Unexpected response code: 500 (1 error occurred:
        * Failed to join 172.17.0.2: Remote state is encrypted and encryption is not configured

)
Failed to join any nodes.

5.6 重启server4，加入集群成功！

[root@wuli-centOS7 server4]# docker restart consul_server_4
consul_server_4
[root@wuli-centOS7 server4]# docker exec consul_server_4 consul join 172.17.0.2
Successfully joined cluster by contacting 1 nodes.
[root@wuli-centOS7 server4]# docker exec consul_server_1 consul members
Node             Address          Status  Type    Build  Protocol  DC   Segment
consul_server_1  172.17.0.2:8301  alive   server  1.7.2  2         dc1  <all>
consul_server_2  172.17.0.3:8301  alive   server  1.7.2  2         dc1  <all>
consul_server_3  172.17.0.4:8301  alive   server  1.7.2  2         dc1  <all>
consul_server_4  172.17.0.5:8301  alive   server  1.7.2  2         dc1  <all>
[root@wuli-centOS7 server4]# docker exec consul_server_1 consul operator raft list-peers
Node             ID                                    Address          State     Voter  RaftProtocol
consul_server_3  0b6169d8-7acc-ed24-682f-56ffd12b486c  172.17.0.4:8300  leader    true   3
consul_server_2  78293668-16a6-1de0-673f-455d594e7447  172.17.0.3:8300  follower  true   3
consul_server_1  0214e0b9-04fe-e8ad-c855-b5091dfc8e2e  172.17.0.2:8300  follower  true   3
consul_server_4  587e81c7-f1b5-5f19-311c-741c06ca446d  172.17.0.5:8300  follower  false  3

增加ACL token权限配置

配置master的token，master的token可以自由定义，但为了与其他token格式一致，官方建议使用64位的UUID。consul的配置文件可以有多个，文件后缀名可以是json或者hcl，我们这里使用hcl来演示。

启用ACL，配置master token

Consul的ACL功能需要显示启用，在配置文件中通过设置参数acl.enabled=true即可。
下面演示了两种方法来配置ACL，个人推荐方法二。
方法一：配置acl.enabled=true，然后通过命令consul acl bootstrap生成token，之后把改token作为master的token。

添加配置文件acl.hcl：

[root@wuli-centOS7 ~]# vim /data/consul/server4/config/acl.hcl

primary_datacenter = "dc1"
acl {
  enabled = true
  default_policy = "deny"
  enable_token_persistence = true
  tokens { 
  }
}

重载配置文件，创建初始token，生成的SecretID就是token

[root@wuli-centOS7 ~]# docker exec consul_server_1 consul reload 
Configuration reload triggered

[root@wuli-centOS7 ~]# consul acl bootstrap
AccessorID:       b6676320-dbef-4020-ae69-8a47ae13dcef
SecretID:         474dcea7-ee4d-3f11-1af1-a38eb37d3f5d
Description:      Bootstrap Token (Global Management)
Local:            false
Create Time:      2020-04-28 11:30:42.2992871 +0800 CST
Policies:
   00000000-0000-0000-0000-000000000001 - global-management

修改配置文件acl.hcl，加入mater token

[root@wuli-centOS7 ~]# vim /data/consul/server4/config/acl.hcl

primary_datacenter = "dc1"
acl {
  enabled = true
  default_policy = "deny"
  enable_token_persistence = true
  tokens { 
    master = "474dcea7-ee4d-3f11-1af1-a38eb37d3f5d  
  }
}

重启服务，验证

方法二：

使用linux的uuidgen命令生成一个64位UUID作为master token

[root@wuli-centOS7 ~]# uuidgen
dcb93655-0661-4ea1-bfc4-e5744317f99e

编写acl.hcl文件文件

[root@wuli-centOS7 ~]# vim /data/consul/server4/config/acl.hcl

primary_datacenter = "dc1"
acl {
  enabled = true
  default_policy = "deny"
  enable_token_persistence = true
  tokens {
    master = "dcb93655-0661-4ea1-bfc4-e5744317f99e"
  }
}

修改config.json配置，把bootstrap_expect修改成1

3.重载配置文件，验证是否正确。

[root@wuli-centOS7 ~]# docker exec consul_server_1 consul reload 
Configuration reload triggered

优雅关闭其他server，重启consul_server_1容器

[root@wuli-centOS7 ~]# docker exec consul_server_2 consul leave
[root@wuli-centOS7 ~]# docker exec consul_server_3 consul leave
[root@wuli-centOS7 ~]# docker exec consul_server_4 consul leave

[root@wuli-centOS7 ~]# docker restart consul_server_1

访问ui，提示需要输入token，输入我们上面的mater token即可
此时，使用consul大部分命令，都需要带上token，否则报错：

[root@wuli-centOS7 ~]# docker exec consul_server_1 consul info
Error querying agent: Unexpected response code: 403 (Permission denied)

带上token参数：

[root@wuli-centOS7 ~]# docker exec consul_server_1 consul info -token=dcb93655-0661-4ea1-bfc4-e5744317f99e   
agent:
        check_monitors = 0
        check_ttls = 0
        checks = 0
        services = 0
……

不是在docker启动的consul，可以通过增加环境变量CONSUL_HTTP_TOKEN代替每次命令后带token参数

[root@wuli-centOS7 ~]# vi /etc/profile
export CONSUL_HTTP_TOKEN=dcb93655-0661-4ea1-bfc4-e5744317f99e

[root@wuli-centOS7 ~]# source /etc/profile

在docker运行中的consul容器，目前不清楚怎么修改环境变量永久生效，但可以rm移除旧容器，然后在run的时候添加上环境变量，这里就不演示了。

查看consul_server_1容器的全部环境变量

[root@wuli-centOS7 ~]# docker exec consul_server_1 env  
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
HOSTNAME=2c2c68c4058f
CONSUL_BIND_INTERFACE=eth0
CONSUL_VERSION=1.7.2
HASHICORP_RELEASES=https://releases.hashicorp.com
HOME=/root

查资料CONSUL_BIND_INTERFACE是什么参数

配置agent token

agent token是每个集群都需要的token
没有配置agent token，查看日志报以下警告：

[root@wuli-centOS7 ~]# docker exec consul_server_1 consul monitor -token=dcb93655-0661-4ea1-bfc4-e5744317f99e   

2020-05-06T02:40:09.386Z [WARN]  agent: Coordinate update blocked by ACLs: accessorID=

使用API生成全权限的token作为agent token，可以根据实际情况分配agent token的权限

[root@wuli-centOS7 ~]# curl -X PUT \
  http://localhost:8510/v1/acl/create \
  -H 'X-Consul-Token: dcb93655-0661-4ea1-bfc4-e5744317f99e' \
  -d '{"Name": "dc1","Type": "management"}'
 
{"ID":"7f587432-3650-9073-e3f4-445a2463b11f"}

把生成的token写入到配置文件acl.hcl中

[root@wuli-centOS7 ~]# vim /data/consul/server1/config/acl.hcl

primary_datacenter = "dc1"
acl {
  enabled = true
  default_policy = "deny"
  enable_token_persistence = true
  tokens {
    master = "dcb93655-0661-4ea1-bfc4-e5744317f99e"
    agent = "7f587432-3650-9073-e3f4-445a2463b11f"
  }
}

重载配置文件，这里无需重启consul或者容器

[root@wuli-centOS7 ~]# docker exec consul_server_1 consul reload -token=dcb93655-0661-4ea1-bfc4-e5744317f99e
Configuration reload triggered

查看日志，重载配置文件后，已经不报任何警告了

[root@wuli-centOS7 ~]# docker exec consul_server_1 consul monitor -token=dcb93655-0661-4ea1-bfc4-e5744317f99e

2020-05-06T03:00:20.034Z [INFO]  agent: Caught: signal=hangup
2020-05-06T03:00:20.034Z [INFO]  agent: Reloading configuration...

在集群中acl的配置信息是一致的，所以直接把server1的acl.hcl配置文件复制到其他server节点的配置文件夹下即可

[root@wuli-centOS7 config]# cp /data/consul/server1/config/acl.hcl /data/consul/server2/config/
[root@wuli-centOS7 config]# cp /data/consul/server1/config/acl.hcl /data/consul/server3/config/

重启其他容器，查看集群情况

[root@wuli-centOS7 config]# docker restart consul_server_2
consul_server_2

[root@wuli-centOS7 config]# docker restart consul_server_3
consul_server_3

[root@wuli-centOS7 config]# docker exec consul_server_1 consul members -token=dcb93655-0661-4ea1-bfc4-e5744317f99e
Node             Address          Status  Type    Build  Protocol  DC   Segment
consul_server_1  172.17.0.2:8301  alive   server  1.7.2  2         dc1  <all>
consul_server_2  172.17.0.3:8301  alive   server  1.7.2  2         dc1  <all>
consul_server_3  172.17.0.4:8301  alive   server  1.7.2  2         dc1  <all>

[root@wuli-centOS7 config]# docker exec consul_server_1 consul operator raft list-peers -token=dcb93655-0661-4ea1-bfc4-e5744317f99e                 
Node             ID                                    Address          State     Voter  RaftProtocol
consul_server_1  0214e0b9-04fe-e8ad-c855-b5091dfc8e2e  172.17.0.2:8300  leader    true   3
consul_server_2  78293668-16a6-1de0-673f-455d594e7447  172.17.0.3:8300  follower  true   3
consul_server_3  0b6169d8-7acc-ed24-682f-56ffd12b486c  172.17.0.4:8300  follower  true   3

可以看到，由于前面配置了join参数，所以节点会自动加入集群。
7. 分别访问各个server的ui，查看到的token信息是一致的

至此，consul集群搭建和ACL token权限配置完成！

Docker下部署Consul集群和ACL权限配置

文章目录

Docker下部署Consul集群和ACL权限配置

规划与准备

搭建Consul集群

创建server1配置文件，启动server1节点

创建server2配置文件，启动server2节点

创建server3配置文件，启动server3节点

加入集群

验证Consul集群选举机制

配置join参数，节点自动加入集群

server节点退出集群

节点自动加入集群

节点之间加入通讯密钥

增加ACL token权限配置

启用ACL，配置master token

配置agent token

使用PL/SQL Developer連接遠程Oracle數據庫

基於CentOS 7.7下安裝Oracle Database 19c

Docker下部署Consul集羣和ACL權限配置

Oracle歸檔日誌

Java SE 5th day：Object-oriented 04

Mac下配置sublime實現LaTeX

https://yachay.unat.edu.pe/blog/index.php?comment_area=format_blog&comment_component=blog&comment_co

linux以太網驅動總結