解決方案
1、fosconfig --show查看VF模式是否啓用
DCXa:FID128:admin> fosconfig --show
FC Routing service: enabled
iSCSI service: Service not supported on this Platform
iSNS client service: Service not supported on this Platform
Virtual Fabric: enabled
Ethernet Switch Service: disabled
DCXa:FID128:admin>
2、將所有端口移動到默認的logic switch,默認logic switchFID爲128
DCXa:FID128:admin> lscfg --config 128 -slot 1-4 -port 0-31 //將slot1-4,每個slot上0-31端口移到FID爲128的logic switch
This operation requires that the affected ports be disabled.
Would you like to continue [y/n]?: y
lscfg: A port or ports is already in the current switch.
3、刪除非默認logic switch,刪除前需要通過命令lscfg --show 可以查看FID
4、使用命令lscfg --delete FID刪除logic switch(注意:默認logic switch無法刪除)
DCXa:FID128:admin> lscfg --delete 128(此處128替換爲lscfg)
Unable to delete the default switch.
5、使用命令fosconfig --disable vf禁用Virtual Fabric
DCXa:FID128:admin> fosconfig --disable vf
WARNING: This is a disruptive operation that requires a reboot to take effect.
Would you like to continue [Y/N]: y
Please delete all but the default switch before disabling Virtual Fabric.
6、再次查看Virtual Fabric
DCXa:FID128:admin>
DCXa:FID128:admin> fosconfig --show
FC Routing service: enabled
iSCSI service: Service not supported on this Platform
iSNS client service: Service not supported on this Platform
Virtual Fabric: disabled
Ethernet Switch Servic