總結了 10 種 Mybatis 經常寫錯且必會的知識點

知道的越多,不知道的就越多,業餘的像一棵小草!

編輯:業餘草
來源:https://www.xttblog.com/?p=4998

用來循環容器的標籤forEach,查看例子

foreach元素的屬性主要有item,index,collection,open,separator,close。

  • item:集合中元素迭代時的別名,

  • index:集合中元素迭代時的索引

  • open:常用語where語句中,表示以什麼開始,比如以'('開始

  • separator:表示在每次進行迭代時的分隔符,

  • close 常用語where語句中,表示以什麼結束,

在使用foreach的時候最關鍵的也是最容易出錯的就是collection屬性,該屬性是必須指定的,但是在不同情況下,該屬性的值是不一樣的,主要有一下3種情況:

  • 如果傳入的是單參數且參數類型是一個List的時候,collection屬性值爲list .

  • 如果傳入的是單參數且參數類型是一個array數組的時候,collection的屬性值爲array .

  • 如果傳入的參數是多個的時候,我們就需要把它們封裝成一個Map了,當然單參數也可以封裝成map,實際上如果你在傳入參數的時候,在MyBatis裏面也是會把它封裝成一個Map的,map的key就是參數名,所以這個時候collection屬性值就是傳入的List或array對象在自己封裝的map裏面的key.

針對最後一條,我們來看一下官方說法:

注意 你可以將一個 List 實例或者數組作爲參數對象傳給 MyBatis,當你這麼做的時候,MyBatis 會自動將它包裝在一個 Map 中並以名稱爲鍵。List 實例將會以“list”作爲鍵,而數組實例的鍵將是“array”。

所以,不管是多參數還是單參數的list,array類型,都可以封裝爲map進行傳遞。如果傳遞的是一個List,則mybatis會封裝爲一個list爲key,list值爲object的map,如果是array,則封裝成一個array爲key,array的值爲object的map,如果自己封裝呢,則colloection裏放的是自己封裝的map裏的key值

//mapper中我們要爲這個方法傳遞的是一個容器,將容器中的元素一個一個的
//拼接到xml的方法中就要使用這個forEach這個標籤了
public List<Entity> queryById(List<String> userids);

//對應的xml中如下
  <select id="queryById" resultMap="BaseReslutMap" >
      select * FROM entity
      where id in 
      <foreach collection="userids" item="userid" index="index" open="(" separator="," close=")">
              #{userid}
      </foreach>
  </select>

concat模糊查詢

//比如說我們想要進行條件查詢,但是幾個條件不是每次都要使用,那麼我們就可以
//通過判斷是否拼接到sql中
  <select id="queryById" resultMap="BascResultMap" parameterType="entity">
    SELECT *  from entity
    <where>
        <if test="name!=null">
            name like concat('%',concat(#{name},'%'))
        </if>
    </where>
  </select>

choose (when, otherwise)標籤

choose標籤是按順序判斷其內部when標籤中的test條件出否成立,如果有一個成立,則 choose 結束。當 choose 中所有 when 的條件都不滿則時,則執行 otherwise 中的sql。類似於Java 的 switch 語句,choose 爲 switch,when 爲 case,otherwise 則爲 default。

例如下面例子,同樣把所有可以限制的條件都寫上,方面使用。choose會從上到下選擇一個when標籤的test爲true的sql執行。安全考慮,我們使用where將choose包起來,放置關鍵字多於錯誤。

<!--  choose(判斷參數) - 按順序將實體類 User 第一個不爲空的屬性作爲:where條件 -->  
<select id="getUserList_choose" resultMap="resultMap_user" parameterType="com.yiibai.pojo.User">  
    SELECT *  
      FROM User u   
    <where>  
        <choose>  
            <when test="username !=null ">  
                u.username LIKE CONCAT(CONCAT('%', #{username, jdbcType=VARCHAR}),'%')  
            </when >  
            <when test="sex != null and sex != '' ">  
                AND u.sex = #{sex, jdbcType=INTEGER}  
            </when >  
            <when test="birthday != null ">  
                AND u.birthday = #{birthday, jdbcType=DATE}  
            </when >  
            <otherwise>  
            </otherwise>  
        </choose>  
    </where>    
</select> 

selectKey 標籤

在insert語句中,在Oracle經常使用序列、在MySQL中使用函數來自動生成插入表的主鍵,而且需要方法能返回這個生成主鍵。使用myBatis的selectKey標籤可以實現這個效果。

下面例子,使用mysql數據庫自定義函數nextval('student'),用來生成一個key,並把他設置到傳入的實體類中的studentId屬性上。所以在執行完此方法後,邊可以通過這個實體類獲取生成的key。

<!-- 插入學生 自動主鍵-->  
<insert id="createStudentAutoKey" parameterType="liming.student.manager.data.model.StudentEntity" keyProperty="studentId">  
    <selectKey keyProperty="studentId" resultType="String" order="BEFORE">  
        select nextval('student')  
    </selectKey>  
    INSERT INTO STUDENT_TBL(STUDENT_ID,  
                            STUDENT_NAME,  
                            STUDENT_SEX,  
                            STUDENT_BIRTHDAY,  
                            STUDENT_PHOTO,  
                            CLASS_ID,  
                            PLACE_ID)  
    VALUES (#{studentId},  
            #{studentName},  
            #{studentSex},  
            #{studentBirthday},  
            #{studentPhoto, javaType=byte[], jdbcType=BLOB, typeHandler=org.apache.ibatis.type.BlobTypeHandler},  
            #{classId},  
            #{placeId})  
</insert>  

調用接口方法,和獲取自動生成key

StudentEntity entity = new StudentEntity();  
entity.setStudentName("黎明你好");  
entity.setStudentSex(1);  
entity.setStudentBirthday(DateUtil.parse("1985-05-28"));  
entity.setClassId("20000001");  
entity.setPlaceId("70000001");  
this.dynamicSqlMapper.createStudentAutoKey(entity);  
System.out.println("新增學生ID: " + entity.getStudentId());  

if標籤

if標籤可用在許多類型的sql語句中,我們以查詢爲例。首先看一個很普通的查詢:

<!-- 查詢學生list,like姓名 -->  
<select id="getStudentListLikeName" parameterType="StudentEntity" resultMap="studentResultMap">  
    SELECT * from STUDENT_TBL ST   
WHERE ST.STUDENT_NAME LIKE CONCAT(CONCAT('%', #{studentName}),'%')  
</select>  

但是此時如果studentName爲null,此語句很可能報錯或查詢結果爲空。此時我們使用if動態sql語句先進行判斷,如果值爲null或等於空字符串,我們就不進行此條件的判斷,增加靈活性。

參數爲實體類StudentEntity。將實體類中所有的屬性均進行判斷,如果不爲空則執行判斷條件。

<!-- 2 if(判斷參數) - 將實體類不爲空的屬性作爲where條件 -->  
<select id="getStudentList_if" resultMap="resultMap_studentEntity" parameterType="liming.student.manager.data.model.StudentEntity">  
    SELECT ST.STUDENT_ID,  
           ST.STUDENT_NAME,  
           ST.STUDENT_SEX,  
           ST.STUDENT_BIRTHDAY,  
           ST.STUDENT_PHOTO,  
           ST.CLASS_ID,  
           ST.PLACE_ID  
      FROM STUDENT_TBL ST   
     WHERE  
    <if test="studentName !=null ">  
        ST.STUDENT_NAME LIKE CONCAT(CONCAT('%', #{studentName, jdbcType=VARCHAR}),'%')  
    </if>  
    <if test="studentSex != null and studentSex != '' ">  
        AND ST.STUDENT_SEX = #{studentSex, jdbcType=INTEGER}  
    </if>  
    <if test="studentBirthday != null ">  
        AND ST.STUDENT_BIRTHDAY = #{studentBirthday, jdbcType=DATE}  
    </if>  
    <if test="classId != null and classId!= '' ">  
        AND ST.CLASS_ID = #{classId, jdbcType=VARCHAR}  
    </if>  
    <if test="classEntity != null and classEntity.classId !=null and classEntity.classId !=' ' ">  
        AND ST.CLASS_ID = #{classEntity.classId, jdbcType=VARCHAR}  
    </if>  
    <if test="placeId != null and placeId != '' ">  
        AND ST.PLACE_ID = #{placeId, jdbcType=VARCHAR}  
    </if>  
    <if test="placeEntity != null and placeEntity.placeId != null and placeEntity.placeId != '' ">  
        AND ST.PLACE_ID = #{placeEntity.placeId, jdbcType=VARCHAR}  
    </if>  
    <if test="studentId != null and studentId != '' ">  
        AND ST.STUDENT_ID = #{studentId, jdbcType=VARCHAR}  
    </if>   
</select> 

使用時比較靈活, new一個這樣的實體類,我們需要限制那個條件,只需要附上相應的值就會where這個條件,相反不去賦值就可以不在where中判斷。

public void select_test_2_1() {  
    StudentEntity entity = new StudentEntity();  
    entity.setStudentName("");  
    entity.setStudentSex(1);  
    entity.setStudentBirthday(DateUtil.parse("1985-05-28"));  
    entity.setClassId("20000001");  
    //entity.setPlaceId("70000001");  
    List<StudentEntity> list = this.dynamicSqlMapper.getStudentList_if(entity);  
    for (StudentEntity e : list) {  
        System.out.println(e.toString());  
    }  
}

if + where 的條件判斷

當where中的條件使用的if標籤較多時,這樣的組合可能會導致錯誤。我們以在3.1中的查詢語句爲例子,當java代碼按如下方法調用時:

@Test  
public void select_test_2_1() {  
    StudentEntity entity = new StudentEntity();  
    entity.setStudentName(null);  
    entity.setStudentSex(1);  
    List<StudentEntity> list = this.dynamicSqlMapper.getStudentList_if(entity);  
    for (StudentEntity e : list) {  
        System.out.println(e.toString());  
    }  
} 

如果上面例子,參數studentName爲null,將不會進行STUDENT_NAME列的判斷,則會直接導“WHERE AND”關鍵字多餘的錯誤SQL。

這時我們可以使用where動態語句來解決。這個“where”標籤會知道如果它包含的標籤中有返回值的話,它就插入一個‘where’。此外,如果標籤返回的內容是以AND 或OR 開頭的,則它會剔除掉。

上面例子修改爲:

<!-- 3 select - where/if(判斷參數) - 將實體類不爲空的屬性作爲where條件 -->  
<select id="getStudentList_whereIf" resultMap="resultMap_studentEntity" parameterType="liming.student.manager.data.model.StudentEntity">  
    SELECT ST.STUDENT_ID,  
           ST.STUDENT_NAME,  
           ST.STUDENT_SEX,  
           ST.STUDENT_BIRTHDAY,  
           ST.STUDENT_PHOTO,  
           ST.CLASS_ID,  
           ST.PLACE_ID  
      FROM STUDENT_TBL ST   
    <where>  
        <if test="studentName !=null ">  
            ST.STUDENT_NAME LIKE CONCAT(CONCAT('%', #{studentName, jdbcType=VARCHAR}),'%')  
        </if>  
        <if test="studentSex != null and studentSex != '' ">  
            AND ST.STUDENT_SEX = #{studentSex, jdbcType=INTEGER}  
        </if>  
        <if test="studentBirthday != null ">  
            AND ST.STUDENT_BIRTHDAY = #{studentBirthday, jdbcType=DATE}  
        </if>  
        <if test="classId != null and classId!= '' ">  
            AND ST.CLASS_ID = #{classId, jdbcType=VARCHAR}  
        </if>  
        <if test="classEntity != null and classEntity.classId !=null and classEntity.classId !=' ' ">  
            AND ST.CLASS_ID = #{classEntity.classId, jdbcType=VARCHAR}  
        </if>  
        <if test="placeId != null and placeId != '' ">  
            AND ST.PLACE_ID = #{placeId, jdbcType=VARCHAR}  
        </if>  
        <if test="placeEntity != null and placeEntity.placeId != null and placeEntity.placeId != '' ">  
            AND ST.PLACE_ID = #{placeEntity.placeId, jdbcType=VARCHAR}  
        </if>  
        <if test="studentId != null and studentId != '' ">  
            AND ST.STUDENT_ID = #{studentId, jdbcType=VARCHAR}  
        </if>  
    </where>    
</select>  

if + set實現修改語句

當update語句中沒有使用if標籤時,如果有一個參數爲null,都會導致錯誤。

當在update語句中使用if標籤時,如果前面的if沒有執行,則或導致逗號多餘錯誤。使用set標籤可以將動態的配置SET 關鍵字,和剔除追加到條件末尾的任何不相關的逗號。使用if+set標籤修改後,如果某項爲null則不進行更新,而是保持數據庫原值。

如下示例:

<!-- 4 if/set(判斷參數) - 將實體類不爲空的屬性更新 -->  
<update id="updateStudent_if_set" parameterType="liming.student.manager.data.model.StudentEntity">  
    UPDATE STUDENT_TBL  
    <set>  
        <if test="studentName != null and studentName != '' ">  
            STUDENT_TBL.STUDENT_NAME = #{studentName},  
        </if>  
        <if test="studentSex != null and studentSex != '' ">  
            STUDENT_TBL.STUDENT_SEX = #{studentSex},  
        </if>  
        <if test="studentBirthday != null ">  
            STUDENT_TBL.STUDENT_BIRTHDAY = #{studentBirthday},  
        </if>  
        <if test="studentPhoto != null ">  
            STUDENT_TBL.STUDENT_PHOTO = #{studentPhoto, javaType=byte[], jdbcType=BLOB, typeHandler=org.apache.ibatis.type.BlobTypeHandler},  
        </if>  
        <if test="classId != '' ">  
            STUDENT_TBL.CLASS_ID = #{classId}  
        </if>  
        <if test="placeId != '' ">  
            STUDENT_TBL.PLACE_ID = #{placeId}  
        </if>  
    </set>  
    WHERE STUDENT_TBL.STUDENT_ID = #{studentId};      
</update> 

if + trim代替where/set標籤

trim是更靈活的去處多餘關鍵字的標籤,他可以實踐where和set的效果。

trim代替where

<!-- 5.1if/trim代替where(判斷參數) -將實體類不爲空的屬性作爲where條件-->  
<select id="getStudentList_if_trim" resultMap="resultMap_studentEntity">  
    SELECT ST.STUDENT_ID,  
           ST.STUDENT_NAME,  
           ST.STUDENT_SEX,  
           ST.STUDENT_BIRTHDAY,  
           ST.STUDENT_PHOTO,  
           ST.CLASS_ID,  
           ST.PLACE_ID  
      FROM STUDENT_TBL ST   
    <trim prefix="WHERE" prefixOverrides="AND|OR">  
        <if test="studentName !=null ">  
            ST.STUDENT_NAME LIKE CONCAT(CONCAT('%', #{studentName, jdbcType=VARCHAR}),'%')  
        </if>  
        <if test="studentSex != null and studentSex != '' ">  
            AND ST.STUDENT_SEX = #{studentSex, jdbcType=INTEGER}  
        </if>  
        <if test="studentBirthday != null ">  
            AND ST.STUDENT_BIRTHDAY = #{studentBirthday, jdbcType=DATE}  
        </if>  
        <if test="classId != null and classId!= '' ">  
            AND ST.CLASS_ID = #{classId, jdbcType=VARCHAR}  
        </if>  
        <if test="classEntity != null and classEntity.classId !=null and classEntity.classId !=' ' ">  
            AND ST.CLASS_ID = #{classEntity.classId, jdbcType=VARCHAR}  
        </if>  
        <if test="placeId != null and placeId != '' ">  
            AND ST.PLACE_ID = #{placeId, jdbcType=VARCHAR}  
        </if>  
        <if test="placeEntity != null and placeEntity.placeId != null and placeEntity.placeId != '' ">  
            AND ST.PLACE_ID = #{placeEntity.placeId, jdbcType=VARCHAR}  
        </if>  
        <if test="studentId != null and studentId != '' ">  
            AND ST.STUDENT_ID = #{studentId, jdbcType=VARCHAR}  
        </if>  
    </trim>     
</select> 

trim代替set

<!-- 5.2 if/trim代替set(判斷參數) - 將實體類不爲空的屬性更新 -->  
<update id="updateStudent_if_trim" parameterType="liming.student.manager.data.model.StudentEntity">  
    UPDATE STUDENT_TBL  
    <trim prefix="SET" suffixOverrides=",">  
        <if test="studentName != null and studentName != '' ">  
            STUDENT_TBL.STUDENT_NAME = #{studentName},  
        </if>  
        <if test="studentSex != null and studentSex != '' ">  
            STUDENT_TBL.STUDENT_SEX = #{studentSex},  
        </if>  
        <if test="studentBirthday != null ">  
            STUDENT_TBL.STUDENT_BIRTHDAY = #{studentBirthday},  
        </if>  
        <if test="studentPhoto != null ">  
            STUDENT_TBL.STUDENT_PHOTO = #{studentPhoto, javaType=byte[], jdbcType=BLOB, typeHandler=org.apache.ibatis.type.BlobTypeHandler},  
        </if>  
        <if test="classId != '' ">  
            STUDENT_TBL.CLASS_ID = #{classId},  
        </if>  
        <if test="placeId != '' ">  
            STUDENT_TBL.PLACE_ID = #{placeId}  
        </if>  
    </trim>  
    WHERE STUDENT_TBL.STUDENT_ID = #{studentId}  
</update>

foreach

對於動態SQL 非常必須的,主是要迭代一個集合,通常是用於IN 條件。List 實例將使用“list”做爲鍵,數組實例以“array” 做爲鍵。

foreach元素是非常強大的,它允許你指定一個集合,聲明集合項和索引變量,它們可以用在元素體內。它也允許你指定開放和關閉的字符串,在迭代之間放置分隔符。這個元素是很智能的,它不會偶然地附加多餘的分隔符。

注意:你可以傳遞一個List實例或者數組作爲參數對象傳給MyBatis。當你這麼做的時候,MyBatis會自動將它包裝在一個Map中,用名稱在作爲鍵。List實例將會以“list”作爲鍵,而數組實例將會以“array”作爲鍵。

這個部分是對關於XML配置文件和XML映射文件的而討論的。下一部分將詳細討論Java API,所以你可以得到你已經創建的最有效的映射。

1.參數爲array示例的寫法

接口的方法聲明:

public List<StudentEntity> getStudentListByClassIds_foreach_array(String[] classIds);  

動態SQL語句:

<!-- 7.1 foreach(循環array參數) - 作爲where中in的條件 -->  
<select id="getStudentListByClassIds_foreach_array" resultMap="resultMap_studentEntity">  
    SELECT ST.STUDENT_ID,  
           ST.STUDENT_NAME,  
           ST.STUDENT_SEX,  
           ST.STUDENT_BIRTHDAY,  
           ST.STUDENT_PHOTO,  
           ST.CLASS_ID,  
           ST.PLACE_ID  
      FROM STUDENT_TBL ST  
      WHERE ST.CLASS_ID IN   
     <foreach collection="array" item="classIds"  open="(" separator="," close=")">  
        #{classIds}  
     </foreach>  
</select> 

測試代碼,查詢學生中,在20000001、20000002這兩個班級的學生:

@Test  
public void test7_foreach() {  
    String[] classIds = { "20000001", "20000002" };  
    List<StudentEntity> list = this.dynamicSqlMapper.getStudentListByClassIds_foreach_array(classIds);  
    for (StudentEntity e : list) {  
        System.out.println(e.toString());  
    }  
}

2.參數爲list示例的寫法

接口的方法聲明:

public List<StudentEntity> getStudentListByClassIds_foreach_list(List<String> classIdList); 

動態SQL語句:

<!-- 7.2 foreach(循環List<String>參數) - 作爲where中in的條件 -->  
<select id="getStudentListByClassIds_foreach_list" resultMap="resultMap_studentEntity">  
    SELECT ST.STUDENT_ID,  
           ST.STUDENT_NAME,  
           ST.STUDENT_SEX,  
           ST.STUDENT_BIRTHDAY,  
           ST.STUDENT_PHOTO,  
           ST.CLASS_ID,  
           ST.PLACE_ID  
      FROM STUDENT_TBL ST  
      WHERE ST.CLASS_ID IN   
     <foreach collection="list" item="classIdList"  open="(" separator="," close=")">  
        #{classIdList}  
     </foreach>  
</select>

測試代碼,查詢學生中,在20000001、20000002這兩個班級的學生:

@Test  
public void test7_2_foreach() {  
    ArrayList<String> classIdList = new ArrayList<String>();  
    classIdList.add("20000001");  
    classIdList.add("20000002");  
    List<StudentEntity> list = this.dynamicSqlMapper.getStudentListByClassIds_foreach_list(classIdList);  
    for (StudentEntity e : list) {  
        System.out.println(e.toString());  
    }  
} 

sql片段標籤<sql>:通過該標籤可定義能複用的sql語句片段,在執行sql語句標籤中直接引用即可。這樣既可以提高編碼效率,還能有效簡化代碼,提高可讀性

需要配置的屬性:id="" >>>表示需要改sql語句片段的唯一標識

引用:通過<include refid="" />標籤引用,refid="" 中的值指向需要引用的<sql>中的id=“”屬性

<!--定義sql片段-->  
<sql id="orderAndItem">  
    o.order_id,o.cid,o.address,o.create_date,o.orderitem_id,i.orderitem_id,i.product_id,i.count  
  </sql>  

 <select id="findOrderAndItemsByOid" parameterType="java.lang.String" resultMap="BaseResultMap">  
    select  
<!--引用sql片段-->  
    <include refid="orderAndItem" />  
    from ordertable o  
    join orderitem i on o.orderitem_id = i.orderitem_id  
    where o.order_id = #{orderId}  
  </select>  

發表評論
所有評論
還沒有人評論,想成為第一個評論的人麼? 請在上方評論欄輸入並且點擊發布.
相關文章