實驗一鏈路捆綁eth-trunk
實驗環境
Ensp，win10
實驗需求
交換機和路由器通過配置eth-trunk捆綁鏈路和LACP協議靜態模式實現全網通。
實驗步驟
1.SW1配置
system-view
[haiwei]sysname SW1
[SW1] lacp priority 1000 //優先級1000
[SW1-Eth-Trunk1]bpdu enable //打開自動協商功能
[SW1-Eth-Trunk1]mode lacp-static //lacp設置爲靜態模式
[SW1]int g0/0/1
[SW1-g0/0/1]eth-trunk 1
[SW1-g0/0/1]undo shutdown
[SW1]int g0/0/2
[SW1-g0/0/2]eth-trunk 1
[SW1-g0/0/2]undo shutdown
[SW1]int g0/0/3
[SW1-g0/0/3]eth-trunk 1
[SW1-g0/0/3]undo shutdown
[SW1]int Eth-Trunk 1
[SW1-Eth-Trunk1]max active-linknumber 2
[sw1]int vlan1
[SW1-vlanif1]ip add 192.168.10.2 24 //配置交換機的網關
[SW1]int eth-trunk 2
[SW1-eth-trunk2]trunkport g 0/0/1 to 0/0/2
[SW1-eth-trunk2]undo shutdown //SW1中的eth-trunk2中的兩個接口之間配就好，不需要設置優先級和mode lacp-static和bpdu enable
注：如果誤配了mode lacp-static
刪除方法：
進入g0/0/1和g0/0/2接口，輸入undo Eth-trunk
之後進入eth-trunk 2接口，輸入undo mode ,之後輸入dis this 查看詳情，然後重新配置兩個接口的eth-trunk2
2.SW2配置
system-view
[haiwei]sysname SW2
[SW2-Eth-Trunk1]bpdu enable //打開自動協商功能
[SW2-Eth-Trunk1]mode lacp-static //lacp設置爲靜態模式
[SW2]int g0/0/1
[SW2-g0/0/1]eth-trunk 1
[SW2-g0/0/1]undo shutdown
[SW2]int g0/0/2
[SW2-g0/0/2]eth-trunk 1
[SW2-g0/0/2]undo shutdown
[SW2]int g0/0/3
[SW2-g0/0/3]eth-trunk 1
[SW2-g0/0/3]undo shutdown
[sw2]int vlan1
[SW2-vlanif1]ip add 192.168.10.3 24 //配置交換機網關
R1配置
[R1]int eth-trunk 2
[R1-eth-trunk2]trunkport g 0/0/0 to 0/0/2
[R1-eth-trunk2]ip add 192.168.10.1 24
[R1-eth-trunk2]undo shutdown
[R1]int eth-trunk 1
[R1-eth-trunk1]trunkport g 0/0/1 to 0/0/3
[R1-eth-trunk1]ip add 12.0.0.1 30
[R1-eth-trunk1]undo shutdown
Ｒ２的配置
[R2]int eth-trunk ５
[R2-eth-trunk2]trunkport g 0/0/0 to 0/0/2
[R2-eth-trunk2]ip add 192.168.10.２ 24
[R2-eth-trunk2]undo shutdown
[R2]ip route-static 192.168.10.1 24 12.0.0.1 //配置靜態路由實現跨網通信
配置PC1和PC2
PC1和Ｒ１、R2，網關全部相通的
