人工智能學習--RISC-V架構 K210 Maix-Go 基本使用（二）

LED例程

from fpioa_manager import *
from Maix import GPIO

fm.register(board_info.LED_R, fm.fpioa.GPIO0)

led_r=GPIO(GPIO.GPIO0,GPIO.OUT)

led_r.value(0)

攝像頭例程

import sensor, image, time, lcd

lcd.init(freq=15000000)
sensor.reset()                      # Reset and initialize the sensor. It will
                                    # run automatically, call sensor.run(0) to stop
sensor.set_pixformat(sensor.RGB565) # Set pixel format to RGB565 (or GRAYSCALE)
sensor.set_framesize(sensor.QVGA)   # Set frame size to QVGA (320x240)
sensor.skip_frames(time = 2000)     # Wait for settings take effect.
clock = time.clock()                # Create a clock object to track the FPS.

while(True):
    clock.tick()                    # Update the FPS clock.
    img = sensor.snapshot()         # Take a picture and return the image.
    lcd.display(img)                # Display on LCD
    print(clock.fps())              # Note: MaixPy's Cam runs about half as fast when connected
                                    # to the IDE. The FPS should increase once disconnected.

觸摸屏畫圖例程

import touchscreen as ts
from Maix import GPIO
from machine import I2C
import lcd, image
from board import board_info
from fpioa_manager import fm

fm.register(board_info.BOOT_KEY, fm.fpioa.GPIO1, force=True)
btn_clear = GPIO(GPIO.GPIO1, GPIO.IN)

lcd.init()
i2c = I2C(I2C.I2C0, freq=400000, scl=30, sda=31)
ts.init(i2c)
#ts.calibrate()
lcd.clear()
img = image.Image()
status_last = ts.STATUS_IDLE
x_last = 0
y_last = 0
draw = False
while True:
    (status,x,y) = ts.read()
    print(status, x, y)
    if draw:
        img.draw_line((x_last, y_last, x, y))
    if status_last!=status:
        if (status==ts.STATUS_PRESS or status == ts.STATUS_MOVE):
            draw = True
        else:
            draw = False
        status_last = status
    lcd.display(img)
    x_last = x
    y_last = y
    if btn_clear.value() == 0:
        img.clear()