4.6 語法(其實和寫c,沒啥區別)
存儲過程是可以編程的,意味着可以使用變量,表達式,控制結構 , 來完成比較複雜的功能。
4.6.1 變量
-
DECLARE(聲明變量)
通過 DECLARE 可以定義一個局部變量,該變量的作用範圍只能在 BEGIN…END 塊中。
DECLARE var_name[,...] type [DEFAULT value]
示例 :
delimiter $
create procedure pro_test2()
begin
declare num int default 5;
select num+ 10;
end$
delimiter ;
-
SET(給變量賦值)
直接賦值使用 SET,可以賦常量或者賦表達式,具體語法如下:
SET var_name = expr [, var_name = expr] ...
示例 :
DELIMITER $
CREATE PROCEDURE pro_test3()
BEGIN
DECLARE NAME VARCHAR(20);
SET NAME = 'MYSQL';
SELECT NAME ;
END$
DELIMITER ;
也可以通過select ... into 方式進行賦值操作 :
DELIMITER $
CREATE PROCEDURE pro_test5()
BEGIN
declare countnum int;
select count(*) into countnum from city;
select countnum;
END$
DELIMITER ;
4.6.2 if條件判斷
語法結構 :
if search_condition then statement_list
[elseif search_condition then statement_list] ...
[else statement_list]
end if;
舉個例子,有個小需求:
根據定義的身高變量,判定當前身高的所屬的身材類型
180 及以上 ----------> 身材高挑
170 - 180 ---------> 標準身材
170 以下 ----------> 一般身材
delimiter $
create procedure pro_test6()
begin
declare height int default 175;
declare description varchar(50);
if height >= 180 then
set description = '身材高挑';
elseif height >= 170 and height < 180 then
set description = '標準身材';
else
set description = '一般身材';
end if;
select description ;
end$
delimiter ;
調用結果爲 :
4.6.3 傳遞參數
現在我得需求變化了,我想要動態傳入height的值,然後你給我做判斷,這時候,就用到了傳遞參數。
語法格式 :
create procedure procedure_name([in/out/inout] 參數名 參數類型)
...
IN : 該參數可以作爲輸入,也就是需要調用方傳入值 , 默認
OUT: 該參數作爲輸出,也就是該參數可以作爲返回值
INOUT: 既可以作爲輸入參數,也可以作爲輸出參數
IN - 輸入
需求 :
根據定義的身高變量,判定當前身高的所屬的身材類型
示例 :
delimiter $
create procedure pro_test5(in height int)
begin
declare description varchar(50) default '';
if height >= 180 then
set description='身材高挑';
elseif height >= 170 and height < 180 then
set description='標準身材';
else
set description='一般身材';
end if;
select concat('身高 ', height , '對應的身材類型爲:',description);
end$
delimiter ;
調用:
call pro_test5(168, @description)$
select @description$
小知識
@description : 這種變量要在變量名稱前面加上“@”符號,叫做用戶會話變量,代表整個會話過程他都是有作用的,這個類似於全局變量一樣。
@@global.sort_buffer_size : 這種在變量前加上 "@@" 符號, 叫做 系統變量
4.6.4 case結構
語法結構 :
方式一 :
CASE case_value
WHEN when_value THEN statement_list
[WHEN when_value THEN statement_list] ...
[ELSE statement_list]
END CASE;
方式二 :
CASE
WHEN search_condition THEN statement_list
[WHEN search_condition THEN statement_list] ...
[ELSE statement_list]
END CASE;
需求:
給定一個月份, 然後計算出所在的季度
示例 :
delimiter $
create procedure pro_test9(month int)
begin
declare result varchar(20);
case
when month >= 1 and month <=3 then
set result = '第一季度';
when month >= 4 and month <=6 then
set result = '第二季度';
when month >= 7 and month <=9 then
set result = '第三季度';
when month >= 10 and month <=12 then
set result = '第四季度';
end case;
select concat('您輸入的月份爲 :', month , ' , 該月份爲 : ' , result) as content ;
end$
delimiter ;
4.6.5 while循環
語法結構:
while search_condition do
statement_list
end while;
需求:
計算從1加到n的值
示例 :
delimiter $
create procedure pro_test8(n int)
begin
declare total int default 0;
declare num int default 1;
while num<=n do
set total = total + num;
set num = num + 1;
end while;
select total;
end$
delimiter ;
4.6.6 repeat結構
有條件的循環控制語句, 當滿足條件的時候退出循環 。while 是滿足條件才執行,repeat 是滿足條件就退出循環。
語法結構 :
REPEAT
statement_list
UNTIL search_condition
END REPEAT;
需求:
計算從1加到n的值
示例 :
delimiter $
create procedure pro_test10(n int)
begin
declare total int default 0;
repeat
set total = total + n;
set n = n - 1;
until n=0 # 注意後面沒有分號哦
end repeat;
select total ;
end$
delimiter ;
4.6.7 loop語句(與leave語句配合)
LOOP 實現簡單的循環,退出循環的條件需要使用其他的語句定義,通常可以使用 LEAVE 語句實現,具體語法如下:
[begin_label:] LOOP
statement_list
END LOOP [end_label]
如果不在 statement_list 中增加退出循環的語句,那麼 LOOP 語句可以用來實現簡單的死循環。
4.6.8 leave語句
用來從標註的流程構造中退出,通常和 BEGIN ... END 或者循環一起使用。下面是一個使用 LOOP 和 LEAVE 的簡單例子 , 退出循環:
delimiter $
CREATE PROCEDURE pro_test11(n int)
BEGIN
declare total int default 0;
ins: LOOP #ins 爲這個loop的別名
IF n <= 0 then
leave ins;
END IF;
set total = total + n;
set n = n - 1;
END LOOP ins;
select total;
END$
delimiter ;
4.6.9 遊標/光標
遊標是用來存儲查詢結果集的數據類型 , 在存儲過程和函數中可以使用光標對結果集進行循環的處理。光標的使用包括光標的聲明、OPEN、FETCH 和 CLOSE,其語法分別如下。
聲明光標:
DECLARE cursor_name CURSOR FOR select_statement ;
OPEN 光標:
OPEN cursor_name ;
FETCH 光標:
FETCH cursor_name INTO var_name [, var_name] ...
CLOSE 光標:
CLOSE cursor_name ;
示例 :
初始化腳本:
create table emp(
id int(11) not null auto_increment ,
name varchar(50) not null comment '姓名',
age int(11) comment '年齡',
salary int(11) comment '薪水',
primary key(`id`)
)engine=innodb default charset=utf8 ;
insert into emp(id,name,age,salary) values(null,'金毛獅王',55,3800),(null,'白眉鷹王',60,4000),(null,'青翼蝠王',38,2800),(null,'紫衫龍王',42,1800);
-- 查詢emp表中數據, 並逐行獲取進行展示
create procedure pro_test11()
begin
declare e_id int(11);
declare e_name varchar(50);
declare e_age int(11);
declare e_salary int(11);
declare emp_result cursor for select * from emp;
open emp_result;
fetch emp_result into e_id,e_name,e_age,e_salary;
select concat('id=',e_id , ', name=',e_name, ', age=', e_age, ', 薪資爲: ',e_salary);
fetch emp_result into e_id,e_name,e_age,e_salary;
select concat('id=',e_id , ', name=',e_name, ', age=', e_age, ', 薪資爲: ',e_salary);
fetch emp_result into e_id,e_name,e_age,e_salary;
select concat('id=',e_id , ', name=',e_name, ', age=', e_age, ', 薪資爲: ',e_salary);
fetch emp_result into e_id,e_name,e_age,e_salary;
select concat('id=',e_id , ', name=',e_name, ', age=', e_age, ', 薪資爲: ',e_salary);
fetch emp_result into e_id,e_name,e_age,e_salary;
select concat('id=',e_id , ', name=',e_name, ', age=', e_age, ', 薪資爲: ',e_salary);
close emp_result;
end$
通過循環結構 , 獲取遊標中的數據 :
DELIMITER $
create procedure pro_test12()
begin
DECLARE id int(11);
DECLARE name varchar(50);
DECLARE age int(11);
DECLARE salary int(11);
DECLARE has_data int default 1;
DECLARE emp_result CURSOR FOR select * from emp;
DECLARE EXIT HANDLER FOR NOT FOUND set has_data = 0;
open emp_result;
repeat
fetch emp_result into id , name , age , salary;
select concat('id爲',id, ', name 爲' ,name , ', age爲 ' ,age , ', 薪水爲: ', salary);
until has_data = 0
end repeat;
close emp_result;
end$
DELIMITER ;