無論是Samba服務還是NFS服務,都要把掛載信息寫入到/etc/fstab中,這樣遠程共享資源就會自動隨服務器開機而進行掛載。 |
[root@localhost ~]# yum install autofs Loaded plugins: langpacks, product-id, subscription-manager ...... Running transaction Installing : hesiod-3.2.1-3.el7.x86_64 1/2 Installing : 1:autofs-5.0.7-40.el7.x86_64 2/2 Verifying : hesiod-3.2.1-3.el7.x86_64 1/2 Verifying : 1:autofs-5.0.7-40.el7.x86_64 2/2 Installed: autofs.x86_64 1:5.0.7-40.el7 Dependency Installed: hesiod.x86_64 0:3.2.1-3.el7 Complete!
處於生產環境中的Linux服務器,一般會同時管理許多設備的掛載操作。如果把這些設備掛載信息都寫入到autofs服務的主配置文件中,無疑會讓主配置文件臃腫不堪,不利於服務執行效率,也不利於日後修改裏面的配置內容,因此在 autofs 服務程序的主配置文件中需要按照“掛載目錄 子配置文件”的格式進行填寫。掛載目錄是設備掛載位置的上一級目錄。
例如,光盤設備一般掛載到/media/cdrom目錄中,那麼掛載目錄寫成/media即可。對應的子配置文件則是對這個掛載目錄內的掛載設備信息作進一步的說明。子配置文件需要用戶自行定義,文件名字沒有嚴格要求,但後綴必須以.misc結束。具體的配置參數如第7行的加粗字所示。
[root@localhost ~]# vim /etc/auto.master # # Sample auto.master file # This is an automounter map and it has the following format # key [ -mount-options-separated-by-comma ] location # For details of the format look at autofs(5). /media /etc/iso.misc /misc /etc/auto.misc # # NOTE: mounts done from a hosts map will be mounted with the # "nosuid" and "nodev" options unless the "suid" and "dev" # options are explicitly given. /net -hosts # # Include /etc/auto.master.d/*.autofs +dir:/etc/auto.master.d # # Include central master map if it can be found using # nsswitch sources. # # Note that if there are entries for /net or /misc (as # above) in the included master map any keys that are the # same will not be seen as the first read key seen takes # precedence. +auto.master
在子配置文件中,應按照“掛載目錄 掛載文件類型及權限 :設備名稱”的格式進行填寫。例如,要把光盤設備掛載到/media/iso目錄中,可將掛載目錄寫爲iso,而-fstype爲文件系統格式參數,iso9660爲光盤設備格式,ro、nosuid及nodev爲光盤設備具體的權限參數,/dev/cdrom則是定義要掛載的設備名稱。配置完成後再順手將autofs服務程序啓動並加入到系統啓動項中:
[root@localhost ~]# vim /etc/iso.misc iso -fstype=iso9660,ro,nosuid,nodev :/dev/cdrom [root@localhost ~]# systemctl start autofs [root@localhost ~]# systemctl enable autofs ln -s '/usr/lib/systemd/system/autofs.service' '/etc/systemd/system/multi-user.target.wants/autofs.service'
接下來將發生一件非常有趣的事情。我們先查看當前的光盤設備掛載情況,確認光盤設備沒有被掛載上,而且/media目錄中根本就沒有iso子目錄。但是,我們卻可以使用cd命令切換到這個iso子目錄中,而且光盤設備會被立即自動掛載上。我們也就能順利查看光盤內的內容了。
[root@localhost ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/rhel-root 18G 3.0G 15G 17% / devtmpfs 905M 0 905M 0% /dev tmpfs 914M 140K 914M 1% /dev/shm tmpfs 914M 8.9M 905M 1% /run tmpfs 914M 0 914M 0% /sys/fs/cgroup /dev/sda1 497M 119M 379M 24% /boot [root@linuxprobe ~]# cd /media [root@localhost media]# ls [root@localhost media]# cd iso [root@localhost iso]# ls -l total 812 dr-xr-xr-x. 4 root root 2048 May 7 2017 addons dr-xr-xr-x. 3 root root 2048 May 7 2017 EFI -r--r--r--. 1 root root 8266 Apr 4 2017 EULA -r--r--r--. 1 root root 18092 Mar 6 2012 GPL dr-xr-xr-x. 3 root root 2048 May 7 2017 images dr-xr-xr-x. 2 root root 2048 May 7 2017 isolinux dr-xr-xr-x. 2 root root 2048 May 7 2017 LiveOS -r--r--r--. 1 root root 108 May 7 2017 media.repo dr-xr-xr-x. 2 root root 774144 May 7 2017 Packages dr-xr-xr-x. 24 root root 6144 May 7 2017 release-notes dr-xr-xr-x. 2 root root 4096 May 7 2017 repodata -r--r--r--. 1 root root 3375 Apr 1 2017 RPM-GPG-KEY-redhat-beta -r--r--r--. 1 root root 3211 Apr 1 2017 RPM-GPG-KEY-redhat-release -r--r--r--. 1 root root 1568 May 7 2017 TRANS.TBL
[root@localhost ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/rhel-root 18G 3.0G 15G 17% / devtmpfs 905M 0 905M 0% /dev tmpfs 914M 140K 914M 1% /dev/shm tmpfs 914M 8.9M 905M 1% /run tmpfs 914M 0 914M 0% /sys/fs/cgroup /dev/cdrom 3.5G 3.5G 0 100% /media/iso /dev/sda1 497M 119M 379M 24% /boot