Value
|
802.11 or Symbol/WPA Reason Code
|
Description
|
0
|
REASON_CODE_80211_SUCCESS
|
Reserved internally to indicate success
|
1.
|
REASON_CODE_80211_UNSPECIFIED_ERROR
|
Unspecified Reason
|
3.
|
DISASSOCIATION_REASON_CODE_STATION_LEAVING_ESS
|
Deauthenticated because sending station has left or is leaving IBSS or ESS
|
4.
|
DISASSOCIATION_REASON_CODE_INACTIVITY
|
Disassociated due to inactivity
|
5.
|
DISASSOCIATION_REASON_CODE_STATION_LIMIT_EXCEEDED
|
Disassociated because AP is unable to handle all currently associated stations
|
6.
|
DISASSOCIATION_REASON_CODE_CLASS_2_PKT_FROM_NON_AUTH
|
Class 2 frame received from non-authenticated station
|
7.
|
DISASSOCIATION_REASON_CODE_CLASS_3_PKT_FROM_NON_ASSOC
|
Class 3 frame received from non-associated station
|
8.
|
DISASSOCIATION_REASON_CODE_STATION_LEAVING_BSS
|
Disassociated because sending station has left or is leaving BSS
|
9.
|
DISASSOCIATION_REASON_CODE_STATION_NOT_AUTHENTICATED
|
Station requesting re-association is not authenticated with responding station
|
13.
|
DISASSOCIATION_REASON_CODE_INVALID_INFORMATION_ELEMENT
|
Invalid Information Element
|
14.
|
DISASSOCIATION_REASON_CODE_MIC_FAILURE
|
Michael MIC failure
|
15.
|
DISASSOCIATION_REASON_CODE_4WAY_HANDSHAKE_TIMEOUT
|
4-Way Handshake timeout
|
16.
|
DISASSOCIATION_REASON_CODE_GROUP_KEY_UPDATE_TIMEOUT
|
Group key update timeout
|
17.
|
DISASSOCIATION_REASON_CODE_4WAY_IE_DIFFERENCE
|
Information element in 4-Way Handshake different from Re-associated request/Proberesponse/Beacon
|
18.
|
DISASSOCIATION_REASON_CODE_MULTICAST_CIPHER_INVALID
|
Multicast Cipher is not valid
|
19.
|
DISASSOCIATION_REASON_CODE_UNICAST_CIPHER_INVALID
|
Unicast Cipher is not valid
|
20.
|
DISASSOCIATION_REASON_CODE_AKMP_NOT_VALID
|
AKMP is not valid
|
21.
|
DISASSOCIATION_REASON_CODE_UNSUPPORTED_RSNE_VERSION
|
Unsupported RSN IE version
|
22.
|
DISASSOCIATION_REASON_CODE_INVALID_RSNE_CAPABILITIES
|
Invalid RSN IE Capabilities
|
23.
|
DISASSOCIATION_REASON_CODE_8021X_AUTHENTICATION_FAILED
|
IEEE 802.1X Authentication failed
|
44.
|
DISASSOCIATION_REASON_CODE_PSP_TX_PKT_BUFFER_EXCEEDED
|
Symbol defined (non 802.11 standard) code. The Wireless Switch has exceeded it’s time limit in attempting to deliver buffered PSP frames to the Mobile Unit without receiving a single 802.11 PS Poll or NULL data frame. The Wireless Switch begins the timer when it sets the Mobile Unit’s bit in the TIM section of the 802.11 beacon frame for the BSS. The time limit is at least 15 seconds. The Mobile Unit is probably gone (or may be faulty).
|
77.
|
DISASSOCIATION_REASON_CODE_TRANSMIT_RETRIES_EXCEEDED
|
Symbol defined (non 802.11 standard) codes. The Wireless Switch has exceeded it’s retry limit in attempting to deliver a 802.1x EAP message to the Mobile Unit without receiving a single 802.11 ACK. The retry limit varies according to traffic type but is at least 64 times. The Mobile Unit is either gone or has incorrect 802.1x EAP authentication settings.
|
Disassociate和DeleteReason
某些情況下,客戶端會被解除關聯,我們可以根據如下Reason Code和描述對應起來,以明白是什麼原因導致了客戶端解除關聯。
802.11 Dissassociation Codes
發表評論
所有評論
還沒有人評論,想成為第一個評論的人麼? 請在上方評論欄輸入並且點擊發布.