windows配置skywalking集羣

一、zookeeper

準備配置三個zookeeper，因爲我是單臺模擬，所以需要使用不同的端口，使用版本是apache-zookeeper-3.6.3-bin （必須是3.5+）

1、第1個zookeeper

vi conf/zoo.cfg

修改 dataDir 帶指定目錄下的

# The number of milliseconds of each tick
tickTime=2000
# The number of ticks that the initial 
# synchronization phase can take
initLimit=10
# The number of ticks that can pass between 
# sending a request and getting an acknowledgement
syncLimit=5
# the directory where the snapshot is stored.
# do not use /tmp for storage, /tmp here is just 
# example sakes.
dataDir=H:\\ruanjian\\apache-zookeeper-3.6.3-bin\\apache-zookeeper-3.6.3-bin\\tmp\\zookeeper
# the port at which the clients will connect
clientPort=2181
# the maximum number of client connections.
# increase this if you need to handle more clients
#maxClientCnxns=60
#
# Be sure to read the maintenance section of the 
# administrator guide before turning on autopurge.
#
# http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance
#
# The number of snapshots to retain in dataDir
#autopurge.snapRetainCount=3
# Purge task interval in hours
# Set to "0" to disable auto purge feature
#autopurge.purgeInterval=1

## Metrics Providers
#
# https://prometheus.io Metrics Exporter
#metricsProvider.className=org.apache.zookeeper.metrics.prometheus.PrometheusMetricsProvider
#metricsProvider.httpPort=7000
#metricsProvider.exportJvmInfo=true
server.1=127.0.0.1:3888:2888
server.2=127.0.0.1:3788:2788
server.3=127.0.0.1:3688:2688

在這個對應的tmp\zookeeper 生成一個myid 裏面的值是 1

可以用命令生成

echo 1 >目錄/myid

2、第2個zookeeper

vi conf/zoo.cfg

修改 dataDir 帶指定目錄下的

修改 clientPort 、dataDir ，新增

server.1=127.0.0.1:3888:2888
server.2=127.0.0.1:3788:2788
server.3=127.0.0.1:3688:2688

# The number of milliseconds of each tick
tickTime=2000
# The number of ticks that the initial 
# synchronization phase can take
initLimit=10
# The number of ticks that can pass between 
# sending a request and getting an acknowledgement
syncLimit=5
# the directory where the snapshot is stored.
# do not use /tmp for storage, /tmp here is just 
# example sakes.
dataDir=H:\\ruanjian\\apache-zookeeper-3.6.3-bin-2\\apache-zookeeper-3.6.3-bin\\tmp\\zookeeper
# the port at which the clients will connect
clientPort=2182
# the maximum number of client connections.
# increase this if you need to handle more clients
#maxClientCnxns=60
#
# Be sure to read the maintenance section of the 
# administrator guide before turning on autopurge.
#
# http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance
#
# The number of snapshots to retain in dataDir
#autopurge.snapRetainCount=3
# Purge task interval in hours
# Set to "0" to disable auto purge feature
#autopurge.purgeInterval=1

## Metrics Providers
#
# https://prometheus.io Metrics Exporter
#metricsProvider.className=org.apache.zookeeper.metrics.prometheus.PrometheusMetricsProvider
#metricsProvider.httpPort=7000
#metricsProvider.exportJvmInfo=true
server.1=127.0.0.1:3888:2888
server.2=127.0.0.1:3788:2788
server.3=127.0.0.1:3688:2688

2.2

在這個對應的tmp\zookeeper 生成一個myid 裏面的值是 2

可以用命令生成

echo 2 >目錄/myid

3、第3臺zookeeper

vi conf/zoo.cfg

修改 dataDir 帶指定目錄下的

修改 clientPort 、dataDir ，新增

server.1=127.0.0.1:3888:2888
server.2=127.0.0.1:3788:2788
server.3=127.0.0.1:3688:2688

# The number of milliseconds of each tick
tickTime=2000
# The number of ticks that the initial 
# synchronization phase can take
initLimit=10
# The number of ticks that can pass between 
# sending a request and getting an acknowledgement
syncLimit=5
# the directory where the snapshot is stored.
# do not use /tmp for storage, /tmp here is just 
# example sakes.
dataDir=H:\\ruanjian\\apache-zookeeper-3.6.3-bin-3\\apache-zookeeper-3.6.3-bin\\tmp\\zookeeper
# the port at which the clients will connect
clientPort=2183
# the maximum number of client connections.
# increase this if you need to handle more clients
#maxClientCnxns=60
#
# Be sure to read the maintenance section of the 
# administrator guide before turning on autopurge.
#
# http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance
#
# The number of snapshots to retain in dataDir
#autopurge.snapRetainCount=3
# Purge task interval in hours
# Set to "0" to disable auto purge feature
#autopurge.purgeInterval=1

## Metrics Providers
#
# https://prometheus.io Metrics Exporter
#metricsProvider.className=org.apache.zookeeper.metrics.prometheus.PrometheusMetricsProvider
#metricsProvider.httpPort=7000
#metricsProvider.exportJvmInfo=true
server.1=127.0.0.1:3888:2888
server.2=127.0.0.1:3788:2788
server.3=127.0.0.1:3688:2688

3.2

在這個對應的tmp\zookeeper 生成一個myid 裏面的值是 3

可以用命令生成

echo 3 >目錄/myid

二、elasticsearch 集羣

準備單臺電腦部署三個集羣，使用的 elasticsearch-7.6.1-windows-x86_64 版本

1、第1個，修改 config/elasticsearch.yml

設置node-1爲主節點，另外設置可以跨域訪問

# ======================== Elasticsearch Configuration =========================
#
# NOTE: Elasticsearch comes with reasonable defaults for most settings.
#       Before you set out to tweak and tune the configuration, make sure you
#       understand what are you trying to accomplish and the consequences.
#
# The primary way of configuring a node is via this file. This template lists
# the most important settings you may want to configure for a production cluster.
#
# Please consult the documentation for further information on configuration options:
# https://www.elastic.co/guide/en/elasticsearch/reference/index.html
#
# ---------------------------------- Cluster -----------------------------------
#
# Use a descriptive name for your cluster:
#
cluster.name: esapp
#
# ------------------------------------ Node ------------------------------------
#
# Use a descriptive name for the node:
#
node.name: node-1
node.master: true
node.data: true
#
# Add custom attributes to the node:
#
#node.attr.rack: r1
#
# ----------------------------------- Paths ------------------------------------
#
# Path to directory where to store the data (separate multiple locations by comma):
#
#path.data: /path/to/data
#
# Path to log files:
#
#path.logs: /path/to/logs
#
# ----------------------------------- Memory -----------------------------------
#
# Lock the memory on startup:
#
#bootstrap.memory_lock: true
#
# Make sure that the heap size is set to about half the memory available
# on the system and that the owner of the process is allowed to use this
# limit.
#
# Elasticsearch performs poorly when the system is swapping the memory.
#
# ---------------------------------- Network -----------------------------------
#
# Set the bind address to a specific IP (IPv4 or IPv6):
#
network.host: 0.0.0.0
#
# Set a custom port for HTTP:
#
http.port: 9200
transport.port: 9300
#
# For more information, consult the network module documentation.
#
# --------------------------------- Discovery ----------------------------------
#
# Pass an initial list of hosts to perform discovery when this node is started:
# The default list of hosts is ["127.0.0.1", "[::1]"]
#
discovery.seed_hosts: ["127.0.0.1:9300","127.0.0.1:9302","127.0.0.1:9303"]
#
# Bootstrap the cluster using an initial set of master-eligible nodes:
#
cluster.initial_master_nodes: ["node-1"]
#
# For more information, consult the discovery and cluster formation module documentation.
#
# ---------------------------------- Gateway -----------------------------------
#
# Block initial recovery after a full cluster restart until N nodes are started:
#
#gateway.recover_after_nodes: 3
#
# For more information, consult the gateway module documentation.
#
# ---------------------------------- Various -----------------------------------
#
# Require explicit names when deleting indices:
#
#action.destructive_requires_name: true
http.cors.enabled: true
http.cors.allow-origin: "*"

2、第2個，修改 config/elasticsearch.yml

# ======================== Elasticsearch Configuration =========================
#
# NOTE: Elasticsearch comes with reasonable defaults for most settings.
#       Before you set out to tweak and tune the configuration, make sure you
#       understand what are you trying to accomplish and the consequences.
#
# The primary way of configuring a node is via this file. This template lists
# the most important settings you may want to configure for a production cluster.
#
# Please consult the documentation for further information on configuration options:
# https://www.elastic.co/guide/en/elasticsearch/reference/index.html
#
# ---------------------------------- Cluster -----------------------------------
#
# Use a descriptive name for your cluster:
#
cluster.name: esapp
#
# ------------------------------------ Node ------------------------------------
#
# Use a descriptive name for the node:
#
node.name: node-2
node.master: false
node.data: true
#
# Add custom attributes to the node:
#
#node.attr.rack: r1
#
# ----------------------------------- Paths ------------------------------------
#
# Path to directory where to store the data (separate multiple locations by comma):
#
#path.data: /path/to/data
#
# Path to log files:
#
#path.logs: /path/to/logs
#
# ----------------------------------- Memory -----------------------------------
#
# Lock the memory on startup:
#
#bootstrap.memory_lock: true
#
# Make sure that the heap size is set to about half the memory available
# on the system and that the owner of the process is allowed to use this
# limit.
#
# Elasticsearch performs poorly when the system is swapping the memory.
#
# ---------------------------------- Network -----------------------------------
#
# Set the bind address to a specific IP (IPv4 or IPv6):
#
network.host: 0.0.0.0
#
# Set a custom port for HTTP:
#
http.port: 9202
transport.port: 9302
#
# For more information, consult the network module documentation.
#
# --------------------------------- Discovery ----------------------------------
#
# Pass an initial list of hosts to perform discovery when this node is started:
# The default list of hosts is ["127.0.0.1", "[::1]"]
#
discovery.seed_hosts: ["127.0.0.1:9300","127.0.0.1:9302","127.0.0.1:9303"]
#
# Bootstrap the cluster using an initial set of master-eligible nodes:
#
cluster.initial_master_nodes: ["node-1"]
#
# For more information, consult the discovery and cluster formation module documentation.
#
# ---------------------------------- Gateway -----------------------------------
#
# Block initial recovery after a full cluster restart until N nodes are started:
#
#gateway.recover_after_nodes: 3
#
# For more information, consult the gateway module documentation.
#
# ---------------------------------- Various -----------------------------------
#
# Require explicit names when deleting indices:
#
#action.destructive_requires_name: true
http.cors.enabled: true
http.cors.allow-origin: "*"

3、第3個，修改 config/elasticsearch.yml

# ======================== Elasticsearch Configuration =========================
#
# NOTE: Elasticsearch comes with reasonable defaults for most settings.
#       Before you set out to tweak and tune the configuration, make sure you
#       understand what are you trying to accomplish and the consequences.
#
# The primary way of configuring a node is via this file. This template lists
# the most important settings you may want to configure for a production cluster.
#
# Please consult the documentation for further information on configuration options:
# https://www.elastic.co/guide/en/elasticsearch/reference/index.html
#
# ---------------------------------- Cluster -----------------------------------
#
# Use a descriptive name for your cluster:
#
cluster.name: esapp
#
# ------------------------------------ Node ------------------------------------
#
# Use a descriptive name for the node:
#
node.name: node-3
node.master: false
node.data: true
#
# Add custom attributes to the node:
#
#node.attr.rack: r1
#
# ----------------------------------- Paths ------------------------------------
#
# Path to directory where to store the data (separate multiple locations by comma):
#
#path.data: /path/to/data
#
# Path to log files:
#
#path.logs: /path/to/logs
#
# ----------------------------------- Memory -----------------------------------
#
# Lock the memory on startup:
#
#bootstrap.memory_lock: true
#
# Make sure that the heap size is set to about half the memory available
# on the system and that the owner of the process is allowed to use this
# limit.
#
# Elasticsearch performs poorly when the system is swapping the memory.
#
# ---------------------------------- Network -----------------------------------
#
# Set the bind address to a specific IP (IPv4 or IPv6):
#
network.host: 0.0.0.0
#
# Set a custom port for HTTP:
#
http.port: 9203
transport.port: 9303
#
# For more information, consult the network module documentation.
#
# --------------------------------- Discovery ----------------------------------
#
# Pass an initial list of hosts to perform discovery when this node is started:
# The default list of hosts is ["127.0.0.1", "[::1]"]
#
discovery.seed_hosts: ["127.0.0.1:9300","127.0.0.1:9302","127.0.0.1:9303"]
#
# Bootstrap the cluster using an initial set of master-eligible nodes:
#
cluster.initial_master_nodes: ["node-1"]
#
# For more information, consult the discovery and cluster formation module documentation.
#
# ---------------------------------- Gateway -----------------------------------
#
# Block initial recovery after a full cluster restart until N nodes are started:
#
#gateway.recover_after_nodes: 3
#
# For more information, consult the gateway module documentation.
#
# ---------------------------------- Various -----------------------------------
#
# Require explicit names when deleting indices:
#
#action.destructive_requires_name: true
http.cors.enabled: true
http.cors.allow-origin: "*"

三、apache-skywalking-apm

1、設置第1臺，apache-skywalking-apm

1.1修改 config/application.yml

cluster.selector 設置爲zookeeper

修改cluster.zookeeper.namespace 和 cluster.zookeeper.hostPort

cluster:
  selector: ${SW_CLUSTER:zookeeper}
  standalone:
  # Please check your ZooKeeper is 3.5+, However, it is also compatible with ZooKeeper 3.4.x. Replace the ZooKeeper 3.5+
  # library the oap-libs folder with your ZooKeeper 3.4.x library.
  zookeeper:
    namespace: ${SW_NAMESPACE:"skywalking"}
    #hostPort: ${SW_CLUSTER_ZK_HOST_PORT:localhost:2181}
    hostPort: ${SW_CLUSTER_ZK_HOST_PORT:localhost:2181,localhost:2182,localhost:2183}

設置 storage.selector 爲 elasticsearch （我這個版本的apm及時使用elasticsearch7也是設置這個）

修改storage.elasticsearch.namespace 和storage.elasticsearch.clusterNodes

storage:
  selector: ${SW_STORAGE:elasticsearch}
  elasticsearch:
    namespace: ${SW_NAMESPACE:"esapp"}
    clusterNodes: ${SW_STORAGE_ES_CLUSTER_NODES:localhost:9200,localhost:9202,localhost:9203}

1.2 修改webapp/webapp.yml

修改 server.port 的端口爲8090(因爲8080已被其它程序佔用)

server:
  port: 8090

2、設置第2臺，apache-skywalking-apm

2.1 修改 config/application.yml

cluster.selector 設置爲zookeeper

修改cluster.zookeeper.namespace 和 cluster.zookeeper.hostPort

cluster:
  selector: ${SW_CLUSTER:zookeeper}
  standalone:
  # Please check your ZooKeeper is 3.5+, However, it is also compatible with ZooKeeper 3.4.x. Replace the ZooKeeper 3.5+
  # library the oap-libs folder with your ZooKeeper 3.4.x library.
  zookeeper:
    namespace: ${SW_NAMESPACE:"skywalking"}
    #hostPort: ${SW_CLUSTER_ZK_HOST_PORT:localhost:2181}
    hostPort: ${SW_CLUSTER_ZK_HOST_PORT:localhost:2181,localhost:2182,localhost:2183}

設置 storage.selector 爲 elasticsearch （我這個版本的apm及時使用elasticsearch7也是設置這個）

修改storage.elasticsearch.namespace 和storage.elasticsearch.clusterNodes

storage:
  selector: ${SW_STORAGE:elasticsearch}
  elasticsearch:
    namespace: ${SW_NAMESPACE:"esapp"}
    clusterNodes: ${SW_STORAGE_ES_CLUSTER_NODES:localhost:9200,localhost:9202,localhost:9203}

設置core.default.restPort 爲 22800 和core.default.gRPCPort 爲 21800

core:
  selector: ${SW_CORE:default}
  default:
    # Mixed: Receive agent data, Level 1 aggregate, Level 2 aggregate
    # Receiver: Receive agent data, Level 1 aggregate
    # Aggregator: Level 2 aggregate
    role: ${SW_CORE_ROLE:Mixed} # Mixed/Receiver/Aggregator
    restHost: ${SW_CORE_REST_HOST:0.0.0.0}
    restPort: ${SW_CORE_REST_PORT:22800}
    restContextPath: ${SW_CORE_REST_CONTEXT_PATH:/}
    restMinThreads: ${SW_CORE_REST_JETTY_MIN_THREADS:1}
    restMaxThreads: ${SW_CORE_REST_JETTY_MAX_THREADS:200}
    restIdleTimeOut: ${SW_CORE_REST_JETTY_IDLE_TIMEOUT:30000}
    restAcceptorPriorityDelta: ${SW_CORE_REST_JETTY_DELTA:0}
    restAcceptQueueSize: ${SW_CORE_REST_JETTY_QUEUE_SIZE:0}
    httpMaxRequestHeaderSize: ${SW_CORE_HTTP_MAX_REQUEST_HEADER_SIZE:8192}
    gRPCHost: ${SW_CORE_GRPC_HOST:0.0.0.0}
    gRPCPort: ${SW_CORE_GRPC_PORT:21800}

2.2 修改webapp/webapp.yml

修改 server.port 的端口爲8090(因爲8080已被其它程序佔用)

server:
  port: 8091

四、java 設置agent代理（apache-skywalking-java-agent-8.8.0）

-javaagent:H:\ruanjian\apache-skywalking-java-agent-8.8.0\skywalking-agent\skywalking-agent.jar
-Dskywalking.agent.service_name=Your_ApplicationName
-Dskywalking.collector.backend_service=127.0.0.1:11800,127.0.0.1:21800

windows配置skywalking集羣

一、zookeeper

二、elasticsearch 集羣

自學編程兩個月，現在我月入 4 萬元

Google Chrome驅動程序 124.0.6367.62（正式版本）去哪下載？

vue3 url不包含#

vue父組件調用子組件的方法，獲取同步(實時)的返回結果

vue3 設置el-dialog height超過滾動條

vue3 循環引用的解決辦法問題，Cannot access ‘xxxx‘ before initialization

el-upload 跟Form表單一起提交

https://yachay.unat.edu.pe/blog/index.php?comment_area=format_blog&comment_component=blog&comment_co

linux以太網驅動總結