H3C交換機恢復出廠配置

方法一

<H3C> reset saved-configuration main   //清空交換機配置

The saved configuration file will be erased. Are you sure? [Y/N]:y  //設備提示保存的配置將會被刪除,是否繼續,選擇y。

Configuration file inflash: is being cleared. Please wait... 

Configuration file is cleared. //配置已被清空

<H3C> reboot      //重啓交換機

Start to check configuration with next startup configuration file, please wait.........DONE!

Current configuration may be lost after the reboot, save current configuration? [Y/N]:n //設備提示會在重啓後丟失當前配置,是否保存當前配置,選擇n

This commandwill reboot the device. Continue? [Y/N]:y //設備提示設備將會重啓,是否繼續,選擇y

Now rebooting, please wait...

 

發表評論
所有評論
還沒有人評論,想成為第一個評論的人麼? 請在上方評論欄輸入並且點擊發布.
相關文章