#安裝部署nginx所用到的安裝工具和相關庫
#默認安裝的http_rewrite_module(使用正則對請求重寫)需pcre庫
#默認安裝的httP_gzip_module(Gzip壓縮)需zlib庫
#安裝http_ssl_module(HTTPS/SLL)需openssl庫
yum -y install gcc pcre pcre-devel zlib zlib-devel openssl openssl-devel
#下載nginx源碼包,並解壓
wget http://nginx.org/download/nginx-1.10.3.tar.gz
tar -zxvf nginx-1.10.3.tar.gz
cd nginx-1.10.3
#設置參數 參數具體參考《Nginx編譯參數》
./configure \
--prefix=/usr/local/nginx \
--with-http_ssl_module
#編譯並安裝
- make && make install
#Nginx的worker進程運行用戶以及用戶組
#user nobody nobody;
#Nginx開啓的進程數
worker_processes 1;
#worker_processes auto;
#以下參數指定了哪個cpu分配給哪個進程,一般來說不用特殊指定。如果一定要設的話,用0和1指定分配方式.
#這樣設就是給1-4個進程分配單獨的核來運行,出現第5個進程是就是隨機分配了。
eg:#worker_processes 4 #4核CPU
#worker_cpu_affinity 0001 0010 0100 1000
#定義全局錯誤日誌定義類型,[debug|info|notice|warn|crit]
#error_log logs/error.log info;
#指定進程ID存儲文件位置
#pid logs/nginx.pid;
#一個nginx進程打開的最多文件描述符數目,理論值應該是最多打開文件數(ulimit -n)與nginx進程數相除,但是nginx分配請求並不是那麼均勻,所以最好與ulimit -n的值保持一致。
- #vim /etc/security/limits.conf
- # * soft nproc 65535
- # * hard nproc 65535
- # * soft nofile 65535
# * hard nofile 65535
worker_rlimit_nofile 65535;
events {
#use [ kqueue | rtsig | epoll | /dev/poll | select | poll ]; epoll模型是Linux 2.6以上版本內核中的高性能網絡I/O模型,如果跑在FreeBSD上面,就用kqueue模型。
use epoll;
#每個進程可以處理的最大連接數,理論上每臺nginx服務器的最大連接數爲worker_processes*worker_connections。理論值:worker_rlimit_nofile/worker_processes
#注意:最大客戶數也由系統的可用socket連接數限制(~ 64K),所以設置不切實際的高沒什麼好處
worker_connections 65535;
#worker工作方式:串行(一定程度降低負載,但服務器吞吐量大時,關閉使用並行方式)
#multi_accept on;
}
#文件擴展名與文件類型映射表
include mime.types;
#默認文件類型
default_type application/octet-stream;
- #日誌相關定義
- #log_format main '$remote_addr - $remote_user [$time_local] "$request" '
# '$status $body_bytes_sent "$http_referer" '
# '"$http_user_agent" "$http_x_forwarded_for"';
#定義日誌的格式。後面定義要輸出的內容。
#1.$remote_addr 與$http_x_forwarded_for 用以記錄客戶端的ip地址;
#2.$remote_user :用來記錄客戶端用戶名稱;
#3.$time_local :用來記錄訪問時間與時區;
#4.$request :用來記錄請求的url與http協議;
#5.$status :用來記錄請求狀態;
#6.$body_bytes_sent :記錄發送給客戶端文件主體內容大小;
#7.$http_referer :用來記錄從那個頁面鏈接訪問過來的;
#8.$http_user_agent :記錄客戶端瀏覽器的相關信息
#連接日誌的路徑,指定的日誌格式放在最後。
#access_log logs/access.log main;
#只記錄更爲嚴重的錯誤日誌,減少IO壓力
error_log logs/error.log crit;
#關閉日誌
#access_log off;
#默認編碼
#charset utf-8;
#服務器名字的hash表大小
server_names_hash_bucket_size 128;
#客戶端請求單個文件的最大字節數
client_max_body_size 8m;
#指定來自客戶端請求頭的hearerbuffer大小
client_header_buffer_size 32k;
#指定客戶端請求中較大的消息頭的緩存最大數量和大小。
large_client_header_buffers 4 64k;
#開啓高效傳輸模式。
sendfile on;
#防止網絡阻塞
tcp_nopush on;
tcp_nodelay on;
#客戶端連接超時時間,單位是秒
keepalive_timeout 60;
#客戶端請求頭讀取超時時間
client_header_timeout 10;
#設置客戶端請求主體讀取超時時間
client_body_timeout 10;
#響應客戶端超時時間
send_timeout 10;
#FastCGI相關參數是爲了改善網站的性能:減少資源佔用,提高訪問速度。
fastcgi_connect_timeout 300;
fastcgi_send_timeout 300;
fastcgi_read_timeout 300;
fastcgi_buffer_size 64k;
fastcgi_buffers 4 64k;
fastcgi_busy_buffers_size 128k;
fastcgi_temp_file_write_size 128k;
#gzip模塊設置
#開啓gzip壓縮輸出
gzip on;
#最小壓縮文件大小
gzip_min_length 1k;
#壓縮緩衝區
gzip_buffers 4 16k;
#壓縮版本(默認1.1,前端如果是squid2.5請使用1.0)
gzip_http_version 1.0;
#壓縮等級 1-9 等級越高,壓縮效果越好,節約寬帶,但CPU消耗大
gzip_comp_level 2;
#壓縮類型,默認就已經包含text/html,所以下面就不用再寫了,寫上去也不會有問題,但是會有一個warn。
gzip_types text/plain application/x-javascript text/css application/xml;
#前端緩存服務器緩存經過壓縮的頁面
gzip_vary on;
#虛擬主機定義
server {
#監聽端口
listen 80;
#訪問域名
server_name localhost;
#編碼格式,若網頁格式與此不同,將被自動轉碼
#charset koi8-r;
#虛擬主機訪問日誌定義
#access_log logs/host.access.log main;
#對URL進行匹配
location / {
#訪問路徑,可相對也可絕對路徑
root html;
#首頁文件。以下按順序匹配
index index.html index.htm;
}
#錯誤信息返回頁面
#error_page 404 /404.html;
# redirect server error pages to the static page /50x.html
#
error_page 500 502 503 504 /50x.html;
location = /50x.html {
root html;
}
#訪問URL以.php結尾則自動轉交給127.0.0.1
# proxy the PHP scripts to Apache listening on 127.0.0.1:80
#
#location ~ \.php$ {
# proxy_pass http://127.0.0.1;
#}
#php腳本請求全部轉發給FastCGI處理
# pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
#
#location ~ \.php$ {
# root html;
# fastcgi_pass 127.0.0.1:9000;
# fastcgi_index index.php;
# fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name;
# include fastcgi_params;
#}
#禁止訪問.ht頁面 (需ngx_http_access_module模塊)
# deny access to .htaccess files, if Apache's document root
# concurs with nginx's one
#
#location ~ /\.ht {
# deny all;
#}
}
#HTTPS虛擬主機定義
# HTTPS server
#
#server {
# listen 443 ssl;
# server_name localhost;
# ssl_certificate cert.pem;
# ssl_certificate_key cert.key;
# ssl_session_cache shared:SSL:1m;
# ssl_session_timeout 5m;
# ssl_ciphers HIGH:!aNULL:!MD5;
# ssl_prefer_server_ciphers on;
# location / {
# root html;
# index index.html index.htm;
# }
#}
#Nginx運行狀態,StubStatus模塊獲取Nginx自啓動的工作狀態(編譯時要開啓對應功能)
#location /NginxStatus {
# #啓用StubStatus的工作訪問狀態
# stub_status on;
# #指定StubStaus模塊的訪問日誌文件
- # access_log logs/Nginxstatus.log;
- # #Nginx認證機制(需Apache的htpasswd命令生成)
- # #auth_basic "NginxStatus";
- # #用來認證的密碼文件
- # #auth_basic_user_file ../htpasswd;
#}
- 訪問:http://IP/NginxStatus(測試就不加密碼驗證相關)
- #以下配置追加在HTTP的全局變量中
- #nginx跟後端服務器連接超時時間(代理連接超時)
proxy_connect_timeout 5;
- #後端服務器數據回傳時間(代理髮送超時)
proxy_send_timeout 5;
- #連接成功後,後端服務器響應時間(代理接收超時)
proxy_read_timeout 60;
- #設置代理服務器(nginx)保存用戶頭信息的緩衝區大小
proxy_buffer_size 16k;
- #proxy_buffers緩衝區,網頁平均在32k以下的話,這樣設置
proxy_buffers 4 32k;
- #高負荷下緩衝大小(proxy_buffers*2)
proxy_busy_buffers_size 64k;
- #設定緩存文件夾大小,大於這個值,將從upstream服務器傳
proxy_temp_file_write_size 64k;
- #反向代理緩存目錄
- proxy_cache_path /data/proxy/cache levels=1:2 keys_zone=cache_one:500m inactive=1d max_size=1g;
#levels=1:2 設置目錄深度,第一層目錄是1個字符,第2層是2個字符
#keys_zone:設置web緩存名稱和內存緩存空間大小
#inactive:自動清除緩存文件時間。
#max_size:硬盤空間最大可使用值。
#指定臨時緩存文件的存儲路徑(路徑需和上面路徑在同一分區)
proxy_temp_path
/data/proxy/temp
#服務配置
server {
#偵聽的80端口
listen 80;
server_name localhost;
location / {
#反向代理緩存設置命令(proxy_cache zone|off,默認關閉所以要設置)
proxy_cache cache_one;
#對不同的狀態碼緩存不同時間
proxy_cache_valid 200 304 12h;
#設置以什麼樣參數獲取緩存文件名
proxy_cache_key $host$uri$is_args$args;
#後7端的Web服務器可以通過X-Forwarded-For獲取用戶真實IP
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
#代理設置
proxy_pass http://IP;
#文件過期時間控制
expires 1d;
}
#配置手動清楚緩存(實現此功能需第三方模塊 ngx_cache_purge)
#http://www.123.com/2017/0316/17.html訪問
#http://www.123.com/purge/2017/0316/17.html清楚URL緩存
- location ~ /purge(/.*) {
- allow 127.0.0.1;
- deny all;
- proxy_cache_purge cache_one $host$1$is_args$args;
- }
- #設置擴展名以.jsp、.php、.jspx結尾的動態應用程序不做緩存
- location ~.*\.(jsp|php|jspx)?$ {
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
- proxy_pass http://http://IP;
- }
#負載均衡服務器池
upstream my_server_pool {
#調度算法
#1.輪循(默認)(weight輪循權值)
#2.ip_hash:根據每個請求訪問IP的hash結果分配。(會話保持)
#3.fair:根據後端服務器響應時間最短請求。(upstream_fair模塊)
#4.url_hash:根據訪問的url的hash結果分配。(需hash軟件包)
#參數:
#down:表示不參與負載均衡
#backup:備份服務器
#max_fails:允許最大請求錯誤次數
#fail_timeout:請求失敗後暫停服務時間。
- server 192.168.1.109:80 weight=1 max_fails=2 fail_timeout=30;
server 192.168.1.108:80 weight=2 max_fails=2 fail_timeout=30;
}
#負載均衡調用
server {
...
location / {
proxy_pass http://my_server_pool;
}
}
#根據不同的瀏覽器URL重寫
if($http_user_agent ~ Firefox){
rewrite ^(.*)$ /firefox/$1 break;
}
if($http_user_agent ~ MSIE){
rewrite ^(.*)$ /msie/$1 break;
}
#實現域名跳轉
location / {
rewrite ^/(.*)$ https://web8.example.com$1 permanent;
}
#限制IP訪問
location / {
deny 192.168.0.2;
allow 192.168.0.0/24;
allow 192.168.1.1;
deny all;
}
- #啓動nginx
- nginx
- #關閉nginx
- nginx -s stop
- #平滑重啓
- kill -HUP `cat /usr/local/nginx/logs/nginx.pid`
#!/bin/bash
#chkconfig: 2345 80 90 #description:auto_run
PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:~/bin
export PATH
# Check if user is root
if [ $(id -u) != "0" ]; then
echo "Error: You must be root to run this script!\n"
exit 1
fi
NGINXDAEMON=/usr/local/nginx/sbin/nginx
PIDFILE=/usr/local/nginx/logs/nginx.pid
function_start()
{
echo -en "\033[32;49;1mStarting nginx......\n"
echo -en "\033[39;49;0m"
if [ -f $PIDFILE ]; then
printf "Nginx is runing!\n"
exit 1
else
$NGINXDAEMON
printf "Nginx is the successful start!\n"
fi
}
function_stop()
{
echo -en "\033[32;49;1mStoping nginx......\n"
echo -en "\033[39;49;0m"
if [ -f $PIDFILE ]; then
kill `cat $PIDFILE`
printf "Nginx program is stoped\n"
else
printf "Nginx program is not runing!\n"
fi
}
function_reload()
{
echo -en "\033[32;49;1mReload nginx......\n"
echo -en "\033[39;49;0m"
- function_stop function_start
}
function_restart()
{
echo -en "\033[32;49;1mRestart nginx......\n"
echo -en "\033[39;49;0m"
printf "Reload Nginx configure...\n"
$NGINXDAEMON -t
kill -HUP `cat $PIDFILE`
printf "Nginx program is reloding!\n"
}
function_kill()
{
killall nginx
}
function_status()
{
if ! ps -ef|grep -v grep|grep 'nginx:' > /dev/null 2>&1
then
printf "Nginx is down!!!\n"
else
printf "Nginx is running now!\n"
fi
}
if [ "$1" = "start" ]; then
function_start
elif [ "$1" = "stop" ]; then
function_stop
elif [ "$1" = "reload" ]; then
function_reload
elif [ "$1" = "restart" ]; then
function_restart
elif [ "$1" = "kill" ]; then
function_kill
elif [ "$1" = "status" ]; then
function_status
else
echo -en "\033[32;49;1m Usage: nginx {start|stop|reload|restart|kill|status}\n"
echo -en "\033[39;49;0m"
fi