一、定義變量
--簡單賦值 declare @a
int set @a=5 print
@a --使用select語句賦值 declare @user1
nvarchar(50) select @user1= '張三' print
@user1 declare @user2
nvarchar(50) select @user2
= Name from ST_User
where ID=1 print
@user2 --使用update語句賦值 declare @user3
nvarchar(50) update ST_User
set @user3
= Name where ID=1 print
@user3 |
二、表、臨時表、表變量
--創建臨時表1 create table #DU_User1 ( [ID]
[ int ]
NOT NULL , [Oid]
[ int ]
NOT NULL , [Login]
[nvarchar](50) NOT NULL , [Rtx]
[nvarchar](4) NOT NULL , [ Name ]
[nvarchar](5) NOT NULL , [ Password ]
[nvarchar]( max )
NULL , [State]
[nvarchar](8) NOT NULL ); --向臨時表1插入一條記錄 insert into #DU_User1
(ID,Oid,[Login],Rtx, Name ,[ Password ],State)
values (100,2, 'LS' , '0000' , '臨時' , '321' , '特殊' ); --從ST_User查詢數據,填充至新生成的臨時表 select *
into #DU_User2
from ST_User
where ID<8 --查詢並聯合兩臨時表 select *
from #DU_User2
where ID<3
union select *
from #DU_User1 --刪除兩臨時表 drop table #DU_User1 drop table #DU_User2 |
--創建臨時表 CREATE TABLE #t ( [ID]
[ int ]
NOT NULL , [Oid]
[ int ]
NOT NULL , [Login]
[nvarchar](50) NOT NULL , [Rtx]
[nvarchar](4) NOT NULL , [ Name ]
[nvarchar](5) NOT NULL , [ Password ]
[nvarchar]( max )
NULL , [State]
[nvarchar](8) NOT NULL , ) --將查詢結果集(多條數據)插入臨時表 insert into #t
select *
from ST_User --不能這樣插入 --select
* into #t from dbo.ST_User --添加一列,爲int型自增長子段 alter table #t
add [myid]
int NOT NULL IDENTITY(1,1) --添加一列,默認填充全球唯一標識 alter table #t
add [myid1]
uniqueidentifier NOT NULL default (newid()) select *
from #t drop table #t |
--給查詢結果集增加自增長列 --無主鍵時: select IDENTITY( int ,1,1) as ID,
Name ,[Login],[ Password ]
into #t
from ST_User select *
from #t --有主鍵時: select ( select SUM (1)
from ST_User
where ID<=
a.ID) as myID,*
from ST_User
a order by myID |
--定義表變量 declare @t
table ( id
int not null , msg
nvarchar(50) null ) insert into @t
values (1, '1' ) insert into @t
values (2, '2' ) select *
from @t |
三、循環
--while循環計算1到100的和 declare @a
int declare @ sum int set @a=1 set @ sum =0 while
@a<=100 begin set @ sum +=@a set @a+=1 end print
@ sum |
四、條件語句
--if,else條件分支 if(1+1=2) begin print
'對' end else begin print
'錯' end --when
then條件分支 declare @today
int declare @week
nvarchar(3) set @today=3 set @week= case when @today=1
then '星期一' when @today=2
then '星期二' when @today=3
then '星期三' when @today=4
then '星期四' when @today=5
then '星期五' when @today=6
then '星期六' when @today=7
then '星期日' else '值錯誤' end print
@week |
五、遊標
declare @ID
int declare @Oid
int declare @Login
varchar (50) --定義一個遊標 declare user_cur
cursor for select ID,Oid,[Login]
from ST_User --打開遊標 open user_cur while
@@fetch_status=0 begin --讀取遊標 fetch next from user_cur
into @ID,@Oid,@Login print
@ID --print
@Login end close user_cur --摧毀遊標 deallocate user_cur |
六、觸發器
觸發器中的臨時表:
Inserted
存放進行insert和update 操作後的數據
Deleted
存放進行delete 和update操作前的數據
--創建觸發器 Create trigger User_OnUpdate
On ST_User
for Update As declare @msg
nvarchar(50) --@msg記錄修改情況 select @msg
= N '姓名從“' +
Deleted. Name +
N '”修改爲“' +
Inserted. Name +
'”' from Inserted,Deleted --插入日誌表 insert into [LOG](MSG) values (@msg) --刪除觸發器 drop trigger User_OnUpdate |
七、存儲過程
--創建帶output參數的存儲過程 CREATE PROCEDURE PR_Sum @a
int , @b
int , @ sum int output AS BEGIN set @ sum =@a+@b END --創建Return返回值存儲過程 CREATE PROCEDURE PR_Sum2 @a
int , @b
int AS BEGIN Return @a+@b END --執行存儲過程獲取output型返回值 declare @mysum
int execute PR_Sum
1,2,@mysum output print
@mysum --執行存儲過程獲取Return型返回值 declare @mysum2
int execute @mysum2=
PR_Sum2 1,2 print
@mysum2 |
八、自定義函數
函數的分類:
1)標量值函數
2)表值函數
a:內聯表值函數
b:多語句表值函數
3)系統函數
--新建標量值函數 create function FUNC_Sum1 ( @a
int , @b
int ) returns int as begin return @a+@b end --新建內聯表值函數 create function FUNC_UserTab_1 ( @myId
int ) returns table as return ( select *
from ST_User
where ID<@myId) --新建多語句表值函數 create function FUNC_UserTab_2 ( @myId
int ) returns @t
table ( [ID]
[ int ]
NOT NULL , [Oid]
[ int ]
NOT NULL , [Login]
[nvarchar](50) NOT NULL , [Rtx]
[nvarchar](4) NOT NULL , [ Name ]
[nvarchar](5) NOT NULL , [ Password ]
[nvarchar]( max )
NULL , [State]
[nvarchar](8) NOT NULL ) as begin insert into @t
select *
from ST_User
where ID<@myId return end --調用表值函數 select *
from dbo.FUNC_UserTab_1(15) --調用標量值函數 declare @s
int set @s=dbo.FUNC_Sum1(100,50) print
@s --刪除標量值函數 drop function FUNC_Sum1 |
談談自定義函數與存儲過程的區別:
一、自定義函數:
1. 可以返回表變量
2. 限制頗多,包括
不能使用output參數;
不能用臨時表;
函數內部的操作不能影響到外部環境;
不能通過select返回結果集;
不能update,delete,數據庫表;
3. 必須return 一個標量值或表變量
自定義函數一般用在複用度高,功能簡單單一,爭對性強的地方。
二、存儲過程
1. 不能返回表變量
2. 限制少,可以執行對數據庫表的操作,可以返回數據集
3. 可以return一個標量值,也可以省略return
存儲過程一般用在實現複雜的功能,數據操縱方面。