世紀網通CNG系列常用配置

 

基本參數設置:
Login:root
Password:centnet
Centnet Cos [Software Version V03.01.r4.330 For CNG300 4FXS]
Copyright (C) By 1999-2004 Centnet Technologies Co..Ltd All rights reserved.
Centnet>con
Please input the Password:(密碼爲空)
Centnet/Conf>sup(超級管理員登陸)
Please input the Password:(密碼爲szcentnet)
Centnet/Conf>e0 (設置10M端口)
Centnet/Conf/E0>ip ***.***.***.*** 255.255.255.*** (設置IP地址和子網掩碼)
Centnet/Conf/E0>quit
Centnet/Conf>route add def ***.***.***.*** (設置路由地址或網關地址)
Centnet/Conf>wr (寫入FLASH閃存)
Centnet/Conf>h323
Centnet/Conf/H323>gk ***.***.***.*** (設置gkip)
Centnet/Conf/H323>h323id ******** (設置h323id)
Centnet/Conf/H323>qu
Centnet/Conf>wr
Centnet/Conf>dia t (設置撥號規則)
Centnet/Conf/Dial T>qu
Centnet/Conf>wr
Centnet/Conf>lin (設置各端口參數)
Centnet/Conf/LineALL>pre del t (刪除被叫號碼)
Centnet/Conf/LineALL>pre add ******(加入被叫號碼)
Centnet/Conf/LineALL>num ****** (設置主叫號碼)
Centnet/Conf/LineALL>ter (設置爲終端模式)
Centnet/Conf/LineALL>dis (打開來電顯示)
Centnet/Conf/LineALL>qu
Centnet/Conf>wr
恢復出廠設置命令：
Centnet/Conf>setdefault

重起網關命令:
Centnet/Conf>reboot

用E穿模式註冊網守：
如果已經用GK註冊網守,先去除GK命令,Centnet/Conf/H323>no gk
Centnet/Conf>easy ***.***.***.***

如果註冊平臺需要E.164值
Centnet/Conf/H323>alias ******* (此處爲主叫號碼的值)

免區號設置(鄭州):
Centnet/Conf>dia 0t
Centnet/Conf/Dial 0T>qu
Centnet/Conf>dia t
Centnet/Conf/Dial T>pre +0371
Centnet/Conf/Dial T>qu
Centnet/Conf>wr

網關內部互打：
1.先給每個端口設置號碼
Centnet/Conf>lin
Centnet/Conf/LineAll>pre del t (出廠值每個端口被叫號碼都爲T,如果存在一定要刪除,如果已經刪除過,這兩步可以省略)

Centnet/Conf>lin 0
Centnet/Conf/Line0>pre add 99000
Centnet/Conf/Line0>qu
Centnet/Conf>lin 1
Centnet/Conf/Line1>pre add 99001
Centnet/Conf/Line1>qu
Centnet/Conf>lin 2
Centnet/Conf/Line2>pre add 99002
Centnet/Conf/Line2>qu
Centnet/Conf>lin 3
Centnet/Conf/Line3>pre add 99003
Centnet/Conf/Line3>qu
Centnet/Conf>wr
2.加映射本地的撥號規則
Centnet/Conf>dia 99t
Centnet/Conf/Dial 99T>map 127.0.0.1
Centnet/Conf/Dial 99T>qu
Centnet/Conf>wr

配合多路計費器使用，打開反極信號
Centnet/Conf/LineAll>invertcheck

設置PPPOE撥號連網
Centnet/Conf/E0>pppoe 帳號密碼

打開/關閉路由功能
Centnet/Conf/E0/Nat>start/stop

修改聲音的增益問題：
迴音調製
1.如果本地聽到對方聲音小 Centnet/Conf/LineAll>iv d ** (默認32)
2.如果對方聽到本地聲音小 Centnet/Conf/LineAll>ov d ** (默認32)
音量調製
1.如果本地聽到對方聲音小 Centnet/Conf/LineAll>iv a ** (默認32)
2.如果對方聽到本地聲音小 Centnet/Conf/LineAll>ov a ** (默認32)

當電話撥打對方，對方有響鈴並可以接通，而本方電話沒回鈴
Centnet/Conf/Dial T>ter(設置振鈴爲終端模式，打開假回鈴)

修改登陸密碼：
Centnet/Conf>enpass *****

修改Config模式密碼：
Centnet/Conf>conpass *****

給電話設置模式加密：
Centnet/Conf>app
Centnet/Conf/APP>ivr
Centnet/Conf/APP/IVR>ivrpass ******
Centnet/Conf/APP/IVR>qu
Centnet/Conf/APP>qu
Centnet/Conf>wr

IVR功能開啓/關閉
Centnet/Conf/APP/IVR>ivrcon/no ivrcon(當關閉時，按電話**鍵，系統無任何提示語音)

IVR系統鎖定/解鎖
Centnet/Conf/APP/IVR>ivrlock/no ivrlock(當被鎖定時，按電話**鍵，系統提示“系統已被鎖”)