線上測試高可用集羣部署文檔
目錄：
目錄： 1
項目需求： 2
實現方式： 2
拓撲圖： 3
系統及軟件版本： 3
安裝步驟： 4
IP分配： 4
LVS和keepalived的安裝和配置： 4
LVS主配置： 4
LVS2備 配置： 7
web服務器配置 9
Mysql-MHA高可用： 13
Mysql主配置： 13
manager管理端操作： 15
VIP切換： 16
測試： 26
下面是centos5.6的系統環境，如果是centos6版本，只需改動少許地方即可，步驟一致 。 ---- by 金戈鐵馬行飛燕
其他文章請移步 http://bbotte.com/ Linux工匠
項目需求：
1.兩臺WEB/J2EE應用服務器同時提供服務，且負載均衡，當一臺服務器當機時，另一臺繼續提供服務。
2..兩臺MYSQL數據庫實時同步，保證數據一致性及完整性。
實現方式：
lvs + keepalived + nginx + tomcat + redis + mysql
1.使用lvs+Keepalived集羣
LVS的通過控制IP來實現負載均衡。IPVS是其具體的實現模塊。IPVS的主要作用：安裝在Director Server上面，在Director Server虛擬一個對外訪問的IP（VIP）。用戶訪問VIP，到達Director Server，Director Server根據一定的規則選擇一個Real Server，處理完成後然後返回給客戶端數據。使用lvs+Keepalived集羣技術( DR模式 )讓兩臺WEB/J2EE服務器實現負載均衡和高可用。
2.redis一主一從，實現會話保持
redis主從複製，保證session不丟失，實現會話保持。當用戶往Master端寫入數據時，通過Redis Sync機制將數據文件發送至Slave，Slave也會執行相同的操作確保數據一致。
3.使用MysqlMHA高可用
MysqlMHA是一套優秀的作爲MySQL高可用性環境下故障切換和主從提升的高可用軟件。在MySQL故障切換過程中，MHA能做到0~30秒之內自動完成數據庫的故障切換操作，並且在進行故障切換的過程中，MHA能最大程度上保證數據庫的一致性，以達到真正意義上的高可用。使用MysqlMHA高可用建立穩定的mysql數據庫集羣，可以隨時切換mysql數據庫
4.nginx + tomcat實現頁面訪問
現公司使用的即是前端nginx +後端 tomcat 訪問網站
拓撲圖：
系統及軟件版本：
系統 | CentOS 5.6 X86-64 | kernel | 2.6.18-238.el5 |
LVS | 1.2.1 | keepalived | 1.2.13 |
mysql | 5.1.73 | mysqlMHA | manager-0.55 |
nginx | 1.6.2 | tomcat | 6.0.44 |
jdk | jdk-6u41-linux-amd64 | redis | 2.8.19 |
安裝步驟：
系統分區及安裝：
最小化安裝，並修復bash漏洞，openssl心臟流血漏洞，glibc幽靈漏洞。
修復系統漏洞略，系統安裝略。
IP分配：
LVS主 | 192.168.3.1 | LVS備 | 192.168.3.2 |
LVS VIP | 192.168.3.100 | MHA VIP | 192.168.3.80 |
web1 | 192.168.3.3 | web2 | 192.168.3.4 |
Mysql主 | 192.168.3.5 | Mysql備 | 192.168.3.6 |
LVS和keepalived的安裝和配置：
LVS主配置：
setenforce 0
vim /etc/sysconfig/selinux
yum install -y ipvsadm
wget http://mirrors.opencas.cn/epel/5/x86_64/epel-release-5-4.noarch.rpm
rpm -ivh epel-release-5-4.noarch.rpm
yum install gcc gcc-c++ vim wget lrzsz ntpdate sysstat dstat wget man tree popt popt-devel popt-static libnl libnl-devel openssl* -y
yum install kernel-devel
tar -xzf keepalived-1.2.13.tar.gz
cd keepalived-1.2.13
./configure --prefix=/usr/local/keepalived --disable-fwmark
cp /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/rc.d/init.d/
chmod +x /etc/rc.d/init.d/keepalived
mkdir /etc/keepalived
cp /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/
cp /etc/keepalived/keepalived.conf{,.bak}
sed -i 's/net\.ipv4\.ip\_forward\ \=\ 0/net\.ipv4\.ip\_forward\ \=\ 1/' /etc/sysctl.conf
service keepalived restart
ipvsadm -ln
# vim /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
notification_email {
}
notification_email_from [email protected]
smtp_server 192.168.200.1
smtp_connect_timeout 30
router_id LVS_DEVEL
}
vrrp_sync_group LVS_DEVEL {
group {
VI_1
}
}
vrrp_instance VI_1 {
state MASTER
interface eth0
lvs_sync_daemon_interface eth0
garp_master_delay 5
virtual_router_id 99
priority 151
advert_int 1
authentication {
auth_type PASS
auth_pass 1234567
}
virtual_ipaddress {
192.168.3.100
}
track_interface {
eth0
}
}
virtual_server 192.168.3.100 80 {
delay_loop 2
lb_algo wrr
lb_kind DR
nat_mask 255.255.255.0
# persistence_timeout 3
protocol TCP
real_server 192.168.3.3 80 {
weight 1
TCP_CHECK {
connect_timeout 2
nb_get_retry 3
delay_before_retry 2
connect_port 80
}
}
real_server 192.168.3.4 80 {
weight 1
TCP_CHECK {
connect_timeout 2
nb_get_retry 3
delay_before_retry 2
connect_port 80
}
}
}
service keepalived start
tail -f /var/log/messages
LVS1 日誌：
Jul 7 10:58:03 dr1 Keepalived_vrrp[3645]: Opening file '/etc/keepalived/keepalived.conf'.
Jul 7 10:58:03 dr1 Keepalived_vrrp[3645]: Configuration is using : 66961 Bytes
Jul 7 10:58:03 dr1 Keepalived_vrrp[3645]: Using LinkWatch kernel netlink reflector...
Jul 7 10:58:03 dr1 kernel: IPVS: sync thread started: state = MASTER, mcast_ifn = eth0, syncid = 99
Jul 7 10:58:03 dr1 Keepalived_vrrp[3645]: VRRP sockpool: [ifindex(2), proto(112), unicast(0), fd(11,12)]
Jul 7 10:58:04 dr1 Keepalived_vrrp[3645]: VRRP_Instance(VI_1) Transition to MASTER STATE
Jul 7 10:58:05 dr1 Keepalived_vrrp[3645]: VRRP_Instance(VI_1) Entering MASTER STATE
Jul 7 10:58:05 dr1 Keepalived_vrrp[3645]: VRRP_Instance(VI_1) setting protocol VIPs.
Jul 7 10:58:05 dr1 Keepalived_vrrp[3645]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for 192.168.3.100
Jul 7 10:58:05 dr1 Keepalived_vrrp[3645]: IPVS: No daemon is running
Jul 7 10:58:05 dr1 Keepalived_vrrp[3645]: IPVS: Daemon has already run
Jul 7 10:58:05 dr1 Keepalived_vrrp[3645]: VRRP_Group(LVS_DEVEL) Syncing instances to MASTER state
Jul 7 10:58:05 dr1 Keepalived_vrrp[3645]: Netlink reflector reports IP 192.168.3.100 added
Jul 7 10:58:05 dr1 Keepalived_healthcheckers[3644]: Netlink reflector reports IP 192.168.3.100 added
Jul 7 10:58:05 dr1 avahi-daemon[3312]: Registering new address record for 192.168.3.100 on eth0.
Jul 7 10:58:10 dr1 Keepalived_vrrp[3645]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for 192.168.3.100
iptables設置
iptables -A INPUT -p udp -m udp --dport 3478 -j ACCEPT
iptables -A OUTPUT -p udp -m udp --sport 3478 -j ACCEPT
iptables -A INPUT -p tcp -m tcp --dport 3478 -j ACCEPT
iptables -A OUTPUT -p tcp -m tcp --sport 3478 -j ACCEPT
iptables -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT
iptables -A OUTPUT -p tcp -m tcp --sport 80 -j ACCEPT
iptables -I INPUT -i eth0 -d 224.0.0.0/8 -j ACCEPT
iptables -A INPUT -i eth0 -p vrrp -j ACCEPT
iptables -A OUTPUT -o eth0 -p vrrp -j ACCEPT
LVS2備 配置：
setenforce 0
vim /etc/sysconfig/selinux
yum install -y ipvsadm
wget http://mirrors.opencas.cn/epel/5/x86_64/epel-release-5-4.noarch.rpm
rpm -ivh epel-release-5-4.noarch.rpm
yum install gcc gcc-c++ vim wget lrzsz ntpdate sysstat dstat wget man tree popt popt-devel popt-static libnl libnl-devel openssl* -y
tar -xzf keepalived-1.2.13.tar.gz
cd keepalived-1.2.13
./configure --prefix=/usr/local/keepalived --disable-fwmark
cp /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/rc.d/init.d/
chmod +x /etc/rc.d/init.d/keepalived
mkdir /etc/keepalived
cp /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/
cp /etc/keepalived/keepalived.conf{,.bak}
sed -i 's/net\.ipv4\.ip\_forward\ \=\ 0/net\.ipv4\.ip\_forward\ \=\ 1/' /etc/sysctl.conf
service keepalived restart
vim /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
notification_email {
}
notification_email_from [email protected]
smtp_server 192.168.200.1
smtp_connect_timeout 30
router_id LVS_DEVEL
}
vrrp_sync_group LVS_DEVEL {
group {
VI_1
}
}
vrrp_instance VI_1 {
state SLAVE
interface eth0
lvs_sync_daemon_interface eth0
garp_master_delay 5
virtual_router_id 99
priority 150
advert_int 1
authentication {
auth_type PASS
auth_pass 1234567
}
virtual_ipaddress {
192.168.3.100
}
track_interface {
eth0
}
}
virtual_server 192.168.3.100 80 {
delay_loop 2
lb_algo wrr
lb_kind DR
nat_mask 255.255.255.0
# persistence_timeout 3
protocol TCP
real_server 192.168.3.3 80 {
weight 1
TCP_CHECK {
connect_timeout 2
nb_get_retry 3
delay_before_retry 2
connect_port 80
}
}
real_server 192.168.3.4 80 {
weight 1
TCP_CHECK {
connect_timeout 2
nb_get_retry 3
delay_before_retry 2
connect_port 80
}
}
}
service keepalived start
tail -f /var/log/messages
LVS2 日誌：
Jul 7 10:58:23 dr2 Keepalived_healthcheckers[3634]: Opening file '/etc/keepalived/keepalived.conf'.
Jul 7 10:58:23 dr2 Keepalived_healthcheckers[3634]: Configuration is using : 14654 Bytes
Jul 7 10:58:23 dr2 Keepalived_healthcheckers[3634]: Using LinkWatch kernel netlink reflector...
Jul 7 10:58:23 dr2 Keepalived_healthcheckers[3634]: Activating healthchecker for service [192.168.3.3]:80
Jul 7 10:58:23 dr2 Keepalived_healthcheckers[3634]: Activating healthchecker for service [192.168.3.4]:80
Jul 7 10:58:23 dr2 Keepalived_vrrp[3635]: Opening file '/etc/keepalived/keepalived.conf'.
Jul 7 10:58:23 dr2 Keepalived_vrrp[3635]: Configuration is using : 66959 Bytes
Jul 7 10:58:23 dr2 Keepalived_vrrp[3635]: Using LinkWatch kernel netlink reflector...
Jul 7 10:58:23 dr2 kernel: IPVS: sync thread started: state = BACKUP, mcast_ifn = eth0, syncid = 99
Jul 7 10:58:23 dr2 Keepalived_vrrp[3635]: VRRP_Instance(VI_1) Entering BACKUP STATE
Jul 7 10:58:23 dr2 Keepalived_vrrp[3635]: VRRP sockpool: [ifindex(2), proto(112), unicast(0), fd(11,12)]
web服務器配置
yum install gcc gcc-c++ vim wget lrzsz ntpdate sysstat dstat wget man tree -y
chmod 755 jdk-6u41-linux-x64-rpm.bin
./jdk-6u41-linux-x64-rpm.bin
yum install openssl openssl-devel
java -version
tar -xzf apache-tomcat-6.0.44.tar.gz -C /usr/local/
cd /usr/local/
mv apache-tomcat-6.0.44/ tomcat
tar -zxf pcre-8.35.tar.gz
cd pcre-8.35
./configure --prefix=/usr/local/pcre
make &&make install &&cd ..
groupadd www
useradd -g www www -s /sbin/nologin
tar -xzf nginx-1.6.2.tar.gz
cd nginx-1.6.2
./configure --user=www --group=www --prefix=/usr/local/nginx --with-http_stub_status_module --with-http_gzip_static_module --with-pcre=/root/pcre-8.35 --with-http_realip_module
make -j4
make install
cd /usr/local/tomcat/conf
cp context.xml context.xml.def
vim /usr/local/tomcat/conf/context.xml
<?xml version='1.0' encoding='utf-8'?>
<Context>
<!-- Default set of monitored resources -->
<WatchedResource>WEB-INF/web.xml</WatchedResource>
<Valve className="com.radiadesign.catalina.session.RedisSessionHandlerValve" />
<Manager className="com.radiadesign.catalina.session.RedisSessionManager"
host="192.168.3.3"
port="6379"
database="0"
maxInactiveInterval="60" />
</Context>
tar -xzf redis-2.8.19.tar.gz
make -j4
make install
cp redis.conf /etc/
vim /etc/redis.conf
/usr/local/bin/redis-server /etc/redis.conf &
vim /usr/local/tomcat/webapps/ROOT/test.jsp
<%@ page language="java" %>
<html>
<head><title>TomcatA</title></head>
<body>
<h1><font color="blue">192.168.3.3:8080 Tomcat1 </h1>
<table align="centre" border="1">
<tr>
<td>Session ID</td>
<% session.setAttribute("abc","abc"); %>
<td><%= session.getId() %></td>
</tr>
<tr>
<td>Created on</td>
<td><%= session.getCreationTime() %></td>
</tr>
</table>
</body>
</html>
/usr/local/tomcat/bin/catalina.sh start
grep -v "^.*#" /usr/local/nginx/conf/nginx.conf|sed '/^$/d'
worker_processes 1;
events {
worker_connections 1024;
}
http {
include mime.types;
default_type application/octet-stream;
sendfile on;
keepalive_timeout 65;
upstream mycluser {
server 192.168.3.3:8080;
}
server {
listen 80;
server_name localhost;
location / {
root html;
index index.html index.htm index.jsp;
proxy_pass http://mycluser;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header Host $host;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_redirect off;
}
error_page 500 502 503 504 /50x.html;
location = /50x.html {
root html;
}
}
}
/usr/local/nginx/sbin/nginx
/usr/local/bin/redis-server /etc/redis.conf &
web2服務器需 vim /etc/redis.conf
slaveof 192.168.3.3 6379
編輯腳本並啓動：
vim realserver.sh
#!/bin/bash
#
# Script to start LVS DR real server.
# description: LVS DR real server
#
. /etc/rc.d/init.d/functions
VIP=192.168.3.100
host=`/bin/hostname`
case "$1" in
start)
# Start LVS-DR real server on this machine.
/sbin/ifconfig lo down
/sbin/ifconfig lo up
echo 1 > /proc/sys/net/ipv4/conf/lo/arp_ignore
echo 2 > /proc/sys/net/ipv4/conf/lo/arp_announce
echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore
echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce
/sbin/ifconfig lo:0 $VIP broadcast $VIP netmask 255.255.255.255 up
/sbin/route add -host $VIP dev lo:0
;;
stop)
# Stop LVS-DR real server loopback device(s).
/sbin/ifconfig lo:0 down
echo 0 > /proc/sys/net/ipv4/conf/lo/arp_ignore
echo 0 > /proc/sys/net/ipv4/conf/lo/arp_announce
echo 0 > /proc/sys/net/ipv4/conf/all/arp_ignore
echo 0 > /proc/sys/net/ipv4/conf/all/arp_announce
;;
status)
# Status of LVS-DR real server.
islothere=`/sbin/ifconfig lo:0 | grep $VIP`
isrothere=`netstat -rn | grep "lo:0" | grep $VIP`
if [ ! "$islothere" -o ! "isrothere" ];then
# Either the route or the lo:0 device
# not found.
echo "LVS-DR real server Stopped."
else
echo "LVS-DR real server Running."
fi
;;
*)
# Invalid entry.
echo "$0: Usage: $0 {start|status|stop}"
exit 1
;;
esac
iptables設置：
iptables -A INPUT -p udp -m udp --dport 3478 -j ACCEPT
iptables -A OUTPUT -p udp -m udp --sport 3478 -j ACCEPT
iptables -A INPUT -p tcp -m tcp --dport 3478 -j ACCEPT
iptables -A OUTPUT -p tcp -m tcp --sport 3478 -j ACCEPT
iptables -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT
iptables -A OUTPUT -p tcp -m tcp --sport 80 -j ACCEPT
Mysql-MHA高可用：
Hostname | Ip | 主機說明 |
manager | 192.168.3.7 | 管理端 |
db1 | 192.168.3.5 | 現有主庫 |
db2 | 192.168.3.6 | 備用主庫 |
VIP 192.168.3.80 |
Mysql主配置：
安裝mysql：
yum -y install ncurses*
/usr/sbin/groupadd mysql
/usr/sbin/useradd -g mysql mysql
chown -R mysql.mysql /var/mysql/data
chown -R mysql.mysql /var/log/mysql
cd mysql-5.1.73
yum -y install libtool
./configure --prefix=/usr/local/mysql/ --with-server-suffix=-junsansi-edition --enable-assembler --enable-local-infile --enable-thread-safe-client --with-big-tables --with-charset=utf8 --with-extra-charsets=gbk,gb2312,utf8,ascii --with-readline --with-ssl --with-embedded-server --with-pthread --with-mysqld-user=mysql --with-mysqld-ldflags=-all-static --with-client-ldflags=-all-static --with-plugins=partition,innobase,innodb_plugin
make
make install
cp support-files/mysql.server /etc/init.d/mysqld
chmod 755 /etc/init.d/mysqld
vim /etc/my.cnf
[mysqld]
datadir=/var/mysql/data
socket=/var/log/mysql/mysql.sock
user=mysql
# Default to using old password format for compatibility with mysql 3.x
# clients (those using the mysqlclient10 compatibility package).
old_passwords=1
# Disabling symbolic-links is recommended to prevent assorted security risks;
# to do so, uncomment this line:
# symbolic-links=0
[mysqld_safe]
log-error=/var/log/mysql/mysqld.log
pid-file=/var/log/mysql/mysqld.pid
/usr/local/mysql/bin/mysql_install_db --user=mysql --datadir=/var/mysql/data/ --basedir=/usr/local/mysql --log-output=file
service mysqld start
db1現有主庫操作：
ssh-keygen -t rsa
ssh-copy-id -i ~/.ssh/id_rsa.pub [email protected]
ssh-copy-id -i ~/.ssh/id_rsa.pub [email protected]
mysql -uroot -p
grant replication slave on *.* to mharep@'192.168.3.%' identified by 'passwd';
grant all privileges on *.* to 'mha_manager'@'192.168.3.%' identified by '123456';
flush privileges;
\q
rpm -ivh perl-DBD-MySQL-3.0007-2.el5.x86_64.rpm
rpm -ivh mha4mysql-node-0.54-1.el5.noarch.rpm
db2備用主庫操作：
ssh-keygen -t rsa
ssh-copy-id -i ~/.ssh/id_rsa.pub [email protected]
ssh-copy-id -i ~/.ssh/id_rsa.pub [email protected]
#ntpdate 132.163.4.101
rpm -ivh perl-DBD-MySQL-3.0007-2.el5.x86_64.rpm
rpm -ivh mha4mysql-node-0.54-1.el5.noarch.rpm
/etc/my.cnf
#character-set-server=utf8
server-id=2
log-bin=mysql-bin
binlog_format=mixed
relay_log_purge=0 #最好添加此選項
mysql -uroot -p
reset master;
reset slave;
grant replication slave on *.* to mharep@'192.168.3.%' identified by 'passwd';
grant all privileges on *.* to 'mha_manager'@'192.168.3.%' identified by '123456';
flush privileges;
slave stop;
change master to MASTER_HOST='192.168.3.5', MASTER_PORT=3306,MASTER_USER='mharep', MASTER_PASSWORD='passwd',master_log_file='mysql-bin.000001', master_log_pos=107;
slave start;
show slave status\G;
\q
manager管理端操作：
ssh-keygen -t rsa
ssh-copy-id -i ~/.ssh/id_rsa.pub [email protected]
ssh-copy-id -i ~/.ssh/id_rsa.pub [email protected]
ntpdate 132.163.4.101
yum install perl cpan -y
yum install perl-DBD-MySQL perl-Config-Tiny perl-Log-Dispatch perl-Parallel-ForkManager -y
rpm -ivh perl-Mail-Sender-0.8.16-1.el6.rf.noarch.rpm
rpm -ivh perl-Mail-Sendmail-0.79-1.2.el6.rf.noarch.rpm
yum localinstall perl-Log-Dispatch-2.26-1.el6.rf.noarch.rpm -y
yum localinstall perl-Parallel-ForkManager-0.7.5-2.2.el6.rf.noarch.rpm -y
yum localinstall mha4mysql-node-0.54-1.el5.noarch.rpm -y
yum localinstall mha4mysql-manager-0.55-1.el5.noarch.rpm -y
yum localinstall perl-Net-Telnet-3.03-2.el6.rfx.noarch.rpm -y
tar -xzf mha4mysql-manager-0.55.tar.gz
mkdir -p /usr/local/mha/scripts
cp mha4mysql-manager-0.55/samples/scripts/* /usr/local/mha/scripts
cat >> /usr/local/mha/mha.conf << EOF
[server default]
user=mha_manager
password=123456
manager_workdir=/usr/local/mha
manager_log=/usr/local/mha/manager.log
remote_workdir=/usr/local/mha
ssh_user=root
repl_user=mharep
repl_password=passwd
ping_interval=1
#下面是mysql檢測設置
secondary_check_script= masterha_secondary_check -s 192.168.3.5 -s 192.168.3.6
#master_ip_failover_script=/usr/local/mha/scripts/master_ip_failover
#shutdown_script= /usr/local/mha/scripts/power_manager
report_script= /usr/local/mha/scripts/send_report
master_ip_online_change_script= /usr/local/mha/scripts/master_ip_online_change
[server1]
hostname=192.168.3.5
ssh_port=22
master_binlog_dir=/var/mysql/log #binlog_dir目錄必須正確
candidate_master=1
[server2]
hostname=192.168.3.6
ssh_port=22
master_binlog_dir=/var/mysql/log
candidate_master=1
EOF
masterha_check_ssh --conf=/usr/local/mha/mha.conf
masterha_check_repl --conf=/usr/local/mha/mha.conf
mv /usr/local/mha/scripts/master_ip_failover /usr/local/mha/scripts/master_ip_failover.def
cp master_ip_failover /usr/local/mha/scripts/master_ip_failover
chmod 755 /usr/local/mha/scripts/master_ip_failover
sed -i 's/#master_ip_failover_script/master_ip_failover_script/' /usr/local/mha/mha.conf
VIP切換：
masterha_check_repl --conf=/usr/local/mha/mha.conf
nohup masterha_manager --conf=/usr/local/mha/mha.conf > /tmp/mha_manager.log < /dev/null 2>&1 &
masterha_check_status --conf=/usr/local/mha/mha.conf
masterha_stop --conf=/usr/local/mha/mha.conf
masterha_master_switch --conf=/usr/local/mha/mha.conf --master_state=alive --new_master_host=192.168.23.6 --new_master_port=3306 --orig_master_is_new_slave --running_updates_limit=10000
vim master_ip_online_change
#!/usr/bin/env perl
# Copyright (C) 2011 DeNA Co.,Ltd.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
## Note: This is a sample script and is not complete. Modify the script based on your environment.
use strict;
use warnings FATAL => 'all';
use Getopt::Long;
use MHA::DBHelper;
use MHA::NodeUtil;
use Time::HiRes qw( sleep gettimeofday tv_interval );
use Data::Dumper;
my $_tstart;
my $_running_interval = 0.1;
my (
$command, $orig_master_host, $orig_master_ip,
$orig_master_port, $orig_master_user,
$new_master_host, $new_master_ip, $new_master_port,
$new_master_user,
);
my $vip = '192.168.3.80/24'; # Virtual IP
my $key = "1";
my $ssh_start_vip = "/sbin/ifconfig eth1:$key $vip";
my $ssh_stop_vip = "/sbin/ifconfig eth1:$key down";
my $ssh_user = "root";
my $new_master_password='123456';
my $orig_master_password='123456';
GetOptions(
'command=s' => \$command,
#'ssh_user=s' => \$ssh_user,
'orig_master_host=s' => \$orig_master_host,
'orig_master_ip=s' => \$orig_master_ip,
'orig_master_port=i' => \$orig_master_port,
'orig_master_user=s' => \$orig_master_user,
#'orig_master_password=s' => \$orig_master_password,
'new_master_host=s' => \$new_master_host,
'new_master_ip=s' => \$new_master_ip,
'new_master_port=i' => \$new_master_port,
'new_master_user=s' => \$new_master_user,
#'new_master_password=s' => \$new_master_password,
);
exit &main();
sub current_time_us {
my ( $sec, $microsec ) = gettimeofday();
my $curdate = localtime($sec);
return $curdate . " " . sprintf( "%06d", $microsec );
}
sub sleep_until {
my $elapsed = tv_interval($_tstart);
if ( $_running_interval > $elapsed ) {
sleep( $_running_interval - $elapsed );
}
}
sub get_threads_util {
my $dbh = shift;
my $my_connection_id = shift;
my $running_time_threshold = shift;
my $type = shift;
$running_time_threshold = 0 unless ($running_time_threshold);
$type = 0 unless ($type);
my @threads;
my $sth = $dbh->prepare("SHOW PROCESSLIST");
$sth->execute();
while ( my $ref = $sth->fetchrow_hashref() ) {
my $id = $ref->{Id};
my $user = $ref->{User};
my $host = $ref->{Host};
my $command = $ref->{Command};
my $state = $ref->{State};
my $query_time = $ref->{Time};
my $info = $ref->{Info};
$info =~ s/^\s*(.*?)\s*$/$1/ if defined($info);
next if ( $my_connection_id == $id );
next if ( defined($query_time) && $query_time < $running_time_threshold );
next if ( defined($command) && $command eq "Binlog Dump" );
next if ( defined($user) && $user eq "system user" );
next
if ( defined($command)
&& $command eq "Sleep"
&& defined($query_time)
&& $query_time >= 1 );
if ( $type >= 1 ) {
next if ( defined($command) && $command eq "Sleep" );
next if ( defined($command) && $command eq "Connect" );
}
if ( $type >= 2 ) {
next if ( defined($info) && $info =~ m/^select/i );
next if ( defined($info) && $info =~ m/^show/i );
}
push @threads, $ref;
}
return @threads;
}
sub main {
if ( $command eq "stop" ) {
## Gracefully killing connections on the current master
# 1. Set read_only= 1 on the new master
# 2. DROP USER so that no app user can establish new connections
# 3. Set read_only= 1 on the current master
# 4. Kill current queries
# * Any database access failure will result in script die.
my $exit_code = 1;
eval {
## Setting read_only=1 on the new master (to avoid accident)
my $new_master_handler = new MHA::DBHelper();
# args: hostname, port, user, password, raise_error(die_on_error)_or_not
$new_master_handler->connect( $new_master_ip, $new_master_port,
$new_master_user, $new_master_password, 1 );
print current_time_us() . " Set read_only on the new master.. ";
$new_master_handler->enable_read_only();
if ( $new_master_handler->is_read_only() ) {
print "ok.\n";
}
else {
die "Failed!\n";
}
$new_master_handler->disconnect();
# Connecting to the orig master, die if any database error happens
my $orig_master_handler = new MHA::DBHelper();
$orig_master_handler->connect( $orig_master_ip, $orig_master_port,
$orig_master_user, $orig_master_password, 1 );
## Drop application user so that nobody can connect. Disabling per-session binlog beforehand
#$orig_master_handler->disable_log_bin_local();
#print current_time_us() . " Drpping app user on the orig master..\n";
#FIXME_xxx_drop_app_user($orig_master_handler);
## Waiting for N * 100 milliseconds so that current connections can exit
my $time_until_read_only = 15;
$_tstart = [gettimeofday];
my @threads = get_threads_util( $orig_master_handler->{dbh},
$orig_master_handler->{connection_id} );
while ( $time_until_read_only > 0 && $#threads >= 0 ) {
if ( $time_until_read_only % 5 == 0 ) {
printf
"%s Waiting all running %d threads are disconnected.. (max %d milliseconds)\n",
current_time_us(), $#threads + 1, $time_until_read_only * 100;
if ( $#threads < 5 ) {
print Data::Dumper->new( [$_] )->Indent(0)->Terse(1)->Dump . "\n"
foreach (@threads);
}
}
sleep_until();
$_tstart = [gettimeofday];
$time_until_read_only--;
@threads = get_threads_util( $orig_master_handler->{dbh},
$orig_master_handler->{connection_id} );
}
## Setting read_only=1 on the current master so that nobody(except SUPER) can write
print current_time_us() . " Set read_only=1 on the orig master.. ";
$orig_master_handler->enable_read_only();
if ( $orig_master_handler->is_read_only() ) {
print "ok.\n";
}
else {
die "Failed!\n";
}
## Waiting for M * 100 milliseconds so that current update queries can complete
my $time_until_kill_threads = 5;
@threads = get_threads_util( $orig_master_handler->{dbh},
$orig_master_handler->{connection_id} );
while ( $time_until_kill_threads > 0 && $#threads >= 0 ) {
if ( $time_until_kill_threads % 5 == 0 ) {
printf
"%s Waiting all running %d queries are disconnected.. (max %d milliseconds)\n",
current_time_us(), $#threads + 1, $time_until_kill_threads * 100;
if ( $#threads < 5 ) {
print Data::Dumper->new( [$_] )->Indent(0)->Terse(1)->Dump . "\n"
foreach (@threads);
}
}
sleep_until();
$_tstart = [gettimeofday];
$time_until_kill_threads--;
@threads = get_threads_util( $orig_master_handler->{dbh},
$orig_master_handler->{connection_id} );
}
print "Disabling the VIP on old master: $orig_master_host \n";
&stop_vip();
## Terminating all threads
print current_time_us() . " Killing all application threads..\n";
$orig_master_handler->kill_threads(@threads) if ( $#threads >= 0 );
print current_time_us() . " done.\n";
#$orig_master_handler->enable_log_bin_local();
$orig_master_handler->disconnect();
## After finishing the script, MHA executes FLUSH TABLES WITH READ LOCK
$exit_code = 0;
};
if ($@) {
warn "Got Error: $@\n";
exit $exit_code;
}
exit $exit_code;
}
elsif ( $command eq "start" ) {
## Activating master ip on the new master
# 1. Create app user with write privileges
# 2. Moving backup script if needed
# 3. Register new master's ip to the catalog database
# We don't return error even though activating updatable accounts/ip failed so that we don't interrupt slaves' recovery.
# If exit code is 0 or 10, MHA does not abort
my $exit_code = 10;
eval {
my $new_master_handler = new MHA::DBHelper();
# args: hostname, port, user, password, raise_error_or_not
$new_master_handler->connect( $new_master_ip, $new_master_port,
$new_master_user, $new_master_password, 1 );
## Set read_only=0 on the new master
#$new_master_handler->disable_log_bin_local();
print current_time_us() . " Set read_only=0 on the new master.\n";
$new_master_handler->disable_read_only();
## Creating an app user on the new master
#print current_time_us() . " Creating app user on the new master..\n";
#FIXME_xxx_create_app_user($new_master_handler);
#$new_master_handler->enable_log_bin_local();
$new_master_handler->disconnect();
## Update master ip on the catalog database, etc
print "Enabling the VIP - $vip on the new master - $new_master_host \n";
&start_vip();
$exit_code = 0;
};
if ($@) {
warn "Got Error: $@\n";
exit $exit_code;
}
exit $exit_code;
}
elsif ( $command eq "status" ) {
# do nothing
exit 0;
}
else {
&usage();
exit 1;
}
}
# A simple system call that enable the VIP on the new master
sub start_vip() {
`ssh $ssh_user\@$new_master_host \" $ssh_start_vip \"`;
}
# A simple system call that disable the VIP on the old_master
sub stop_vip() {
`ssh $ssh_user\@$orig_master_host \" $ssh_stop_vip \"`;
}
sub usage {
"Usage: master_ip_online_change --command=start|stop|status --orig_master_host=host --orig_master_ip=ip --orig_master_port=port --new_master_host=host --new_master_ip=ip --new_master_port=port\n";
die;
}
vim master_ip_failover
#!/usr/bin/env perl
use strict;
use warnings FATAL => 'all';
use Getopt::Long;
my (
$command, $ssh_user, $orig_master_host, $orig_master_ip,
$orig_master_port, $new_master_host, $new_master_ip, $new_master_port
);
my $vip = '192.168.23.80'; # Virtual IP
my $gateway = ''; #Gateway IP
my $interface = 'eth1';
my $key = "1";
my $ssh_start_vip = "/sbin/ifconfig $interface:$key $vip;/sbin/arping -I $interface -c 3 -s $vip $gateway >/dev/null 2>&1";
my $ssh_stop_vip = "/sbin/ifconfig $interface:$key down";
GetOptions(
'command=s' => \$command,
'ssh_user=s' => \$ssh_user,
'orig_master_host=s' => \$orig_master_host,
'orig_master_ip=s' => \$orig_master_ip,
'orig_master_port=i' => \$orig_master_port,
'new_master_host=s' => \$new_master_host,
'new_master_ip=s' => \$new_master_ip,
'new_master_port=i' => \$new_master_port,
);
exit &main();
sub main {
print "\n\nIN SCRIPT TEST====$ssh_stop_vip==$ssh_start_vip===\n\n";
if ( $command eq "stop" || $command eq "stopssh" ) {
# $orig_master_host, $orig_master_ip, $orig_master_port are passed.
# If you manage master ip address at global catalog database,
# invalidate orig_master_ip here.
my $exit_code = 1;
eval {
print "Disabling the VIP on old master: $orig_master_host \n";
&stop_vip();
$exit_code = 0;
};
if ($@) {
warn "Got Error: $@\n";
exit $exit_code;
}
exit $exit_code;
}
elsif ( $command eq "start" ) {
# all arguments are passed.
# If you manage master ip address at global catalog database,
# activate new_master_ip here.
# You can also grant write access (create user, set read_only=0, etc) here.
my $exit_code = 10;
eval {
print "Enabling the VIP - $vip on the new master - $new_master_host \n";
&start_vip();
$exit_code = 0;
};
if ($@) {
warn $@;
exit $exit_code;
}
exit $exit_code;
}
elsif ( $command eq "status" ) {
print "Checking the Status of the script.. OK \n";
`ssh $ssh_user\@$orig_master_host \" $ssh_start_vip \"`;
exit 0;
}
else {
&usage();
exit 1;
}
}
# A simple system call that enable the VIP on the new master
sub start_vip() {
`ssh $ssh_user\@$new_master_host \" $ssh_start_vip \"`;
}
# A simple system call that disable the VIP on the old_master
sub stop_vip() {
`ssh $ssh_user\@$orig_master_host \" $ssh_stop_vip \"`;
}
sub usage {
"Usage:
master_ip_failover --command=start|stop|stopssh|status
--orig_master_host=host --orig_master_ip=ip --orig_master_port=port
--new_master_host=host --new_master_ip=ip --new_master_port=port\n";
}
測試：
l 正常訪問網站
web1服務器頁面：
web2服務器頁面：
lvs + keepalived VIP頁面：
l 把主數據庫關機或關閉網卡
1，訪問頁面不受影響，正常訪問
2，數據庫數據完整性、一致性、可用性正常
l 把web1服務器關機或關閉網卡
由於web1和web2實現了負載均衡，所以客戶打開的頁面內容完全一致，訪問正常
l 把LVS1服務器關機或關閉網卡
1，由於2臺服務器實現前端分發請求的高可用，所以LVS1主機當機，網站仍然正常訪問，訪問不受影響
l 打開網站，登錄
在測試期間，一直刷新頁面查看，在LVS1當機的時刻會有少於2秒時間無法訪問網站，高可用可以達到 99.99999% ，保證網站訪問不因爲服務器當機而造成損失。