最常用的Apache路徑有:
/etc/httpd/conf/httpd.conf
/usr/local/apache/conf/httpd.conf
/usr/local/apache2/conf/httpd.conf
Apache 2.2 default layout (apache.org source package):
ServerRoot :: /usr/local/apache2
DocumentRoot :: /usr/local/apache2/htdocs
Apache Config File :: /usr/local/apache2/conf/httpd.conf
Other Config Files :: /usr/local/apache2/conf/extra/
SSL Config File :: /usr/local/apache2/conf/extra/httpd-ssl.conf
ErrorLog :: /usr/local/apache2/logs/error_log
AccessLog :: /usr/local/apache2/logs/access_log
cgi-bin :: /usr/local/apache2/cgi-bin (enabled by default, but the bundled scripts are 644)
binaries (apachectl) :: /usr/local/apache2/bin
start/stop :: /usr/local/apache2/bin/apachectl (start|restart|graceful|graceful-stop|stop|configtest)
Apache 2.0 default layout (apache.org source package):
ServerRoot :: /usr/local/apache2
DocumentRoot :: /usr/local/apache2/htdocs
Apache Config File :: /usr/local/apache2/conf/httpd.conf
SSL Config :: /usr/local/apache2/conf/ssl.conf
ErrorLog :: /usr/local/apache2/logs/error_log
AccessLog :: /usr/local/apache2/logs/access_log
cgi-bin :: /usr/local/apache2/cgi-bin (enabled by default, but the bundled scripts are 644)
binaries (apachectl) :: /usr/local/apache2/bin
start/stop :: /usr/local/apache2/bin/apachectl (start|stop|graceful|configtest)
Apache 1.3 default layout (apache.org source package):
ServerRoot :: /usr/local/apache
DocumentRoot :: /usr/local/apache/htdocs
Apache Config File :: /usr/local/apache/conf/httpd.conf
ErrorLog :: /usr/local/apache/logs/error_log
AccessLog :: /usr/local/apache/logs/access_log
cgi-bin :: /usr/local/apache/cgi-bin (enabled by default, but the bundled scripts are 644)
binaries (apachectl) :: /usr/local/apache/bin
start/stop :: /usr/local/apache/bin/apachectl (start|stop|graceful|configtest)
Debian, Ubuntu (Apache 2):
ServerRoot :: /etc/apache2
DocumentRoot :: /var/www
Apache Config Files :: /etc/apache2/apache2.conf
:: /etc/apache2/ports.conf
Default VHost Config :: /etc/apache2/sites-available/default, /etc/apache2/sites-enabled/000-default
Module Locations :: /etc/apache2/mods-available, /etc/apache2/mods-enabled
ErrorLog :: /var/log/apache2/error.log
AccessLog :: /var/log/apache2/access.log
cgi-bin :: /usr/lib/cgi-bin
binaries (apachectl) :: /usr/sbin
start/stop :: /etc/init.d/apache2
(start|stop|restart|reload|force-reload|start-htcacheclean|stop-htcacheclean)
Notes:
The Debian/Ubuntu layout is fully documented in /usr/share/doc/apache2/README.Debian
Debian/Ubuntu use symlinks to enable vhosts and modules. Configuration
files are created in their respective sites-available and mods-available
directories. To activate vhosts and modules, symlinks are created in
the respective sites-enabled and mods-enabled directories to the config
files in either sites-available and mods-available. Debian provides
scripts to handle this process called ‘a2ensite’ and ‘a2enmod’ which
enables vhosts and modules.
The default DocumentRoot is specified in the default vhost config file, /etc/apache2/sites-available/default
Debian, Ubuntu (Apache 1.3):
ServerRoot :: /etc/apache
DocumentRoot :: /var/www
ErrorLog :: /var/log/apache/error.log
AccessLog :: /var/log/apache/access.log
cgi-bin :: /usr/lib/cgi-bin
binaries (apachectl) :: /usr/sbin
start/stop :: /etc/init.d/apache (start|stop|graceful|configtest)
Fedora Core, CentOS, RHEL:
ServerRoot :: /etc/httpd
Primary Config Fle :: /etc/httpd/conf/httpd.conf
Other Config Files :: /etc/httpd/conf.d
Module Locations :: /usr/lib/httpd/modules
DocumentRoot :: /var/www/html
ErrorLog :: /var/log/httpd/error_log
AccessLog :: /var/log/httpd/access_log
cgi-bin :: /var/www/cgi-bin (empty and disabled by default)
binary :: /usr/sbin/httpd
runtime directory :: /etc/httpd/run
start/stop :: /sbin/service httpd
{start|stop|restart|condrestart|reload|status|fullstatus|graceful|help|configtest}
Notes:
There is an extra config file in /etc/sysconfig/httpd which can be used to change to the worker mpm /usr/sbin/httpd.worker.
Extra config files named *.conf are loaded from /etc/httpd/conf.d. This
directory is used by packages like mod_python for drop-in configs
If you’re having issues with authorization and your permissions are
correct make sure that you try testing with SELinux turned off. Run
‘setenforce 0′ and use ‘chcon’ to fix permissions. Run ‘ls -alZ’ to view
the current permissions.’ SELinux first appeared in Fedora Core 3, RHEL
4, and CentOS 4.
RedHat 9.0 and older:
ServerRoot :: /etc/httpd
Primary Config Fle :: /etc/httpd/conf/httpd.conf
DocumentRoot :: /var/www/html
ErrorLog :: /var/log/httpd/error_log
AccessLog :: /var/log/httpd/access_log
cgi-bin :: /var/www/cgi-bin (empty and disabled by default)
binary :: /usr/sbin/httpd
start/stop :: /sbin/service httpd
{start|stop|restart|condrestart|reload|status|fullstatus|graceful|help|configtest}
Mandriva (Apache 2.2):
ServerRoot :: /etc/httpd
Primary Config Fle :: /etc/httpd/conf/httpd.conf
DocumentRoot :: /var/www/html
ErrorLog :: /var/log/httpd/error_log
AccessLog :: /var/log/httpd/access_log
cgi-bin :: /var/www/cgi-bin
binary :: /usr/sbin/httpd
start/stop :: /sbin/service httpd
{start|stop|restart|reload|graceful|condreload|closelogs|update|condrestart|status|extendedstatus|configtest|configtest_vhosts|semcleanrestart|debug|show_defines}
Mac OS X (Leopard, Apache 2.2):
ServerRoot :: /usr
Primary Config Fle :: /etc/apache2/httpd.conf
DocumentRoot :: /Library/WebServer/Documents
ErrorLog :: /var/log/apache2/error_log
AccessLog :: /var/log/apache2/access_log
cgi-bin :: /Library/WebServer/CGI-Executables (empty by default)
binary :: /usr/sbin/httpd
start/stop :: /usr/sbin/apachectl
(start|stop|restart|fullstatus|status|graceful|graceful-stop|configtest|help)
Mac OS X (Tiger and earlier, Apache 1.3):
ServerRoot :: /usr
Primary Config Fle :: /etc/httpd/httpd.conf
DocumentRoot :: /Library/WebServer/Documents
ErrorLog :: /var/log/httpd/error_log
AccessLog :: /var/log/httpd/access_log
cgi-bin :: /Library/WebServer/CGI-Executables (empty by default)
binary :: /usr/sbin/httpd
start/stop :: apachectl (start|stop|restart|fullstatus|status|graceful|configtest|help)
NetBSD Apache 2.0 and 1.3 from pkgsrc (layout is identical):
ServerRoot :: /usr/pkg
Config File :: /usr/pkg/etc/httpd/httpd.conf
DocumentRoot :: /usr/pkg/share/httpd/htdocs
ErrorLog :: /var/log/httpd/error_log
AccessLog :: /var/log/httpd/access_log
cgi-bin :: /usr/pkg/libexec/cgi-bin
binaries (apachectl) :: /usr/pkg/sbin
start/stop :: /etc/rc.d/apache [fast|force|one](start stop restart rcvar reload status poll)
/etc/rc.conf variables :: apache=YES, apache_start=”start” (or “startssl”)
Notes:
The “apache” script must be copied from the installation default
/usr/pkg/share/examples/rc.d to /etc/rc.d (for automatic rc.conf usage)
or /usr/pkg/etc/rc.d (for advanced usage).
FreeBSD 6.1 (Apache 2.2):
ServerRoot :: /usr/local
Config File :: /usr/local/etc/apache22/httpd.conf
DocumentRoot :: /usr/local/www/apache22/data
ErrorLog :: /var/log/httpd-error.log
AccessLog :: /var/log/httpd-access.log
cgi-bin :: /usr/local/www/apache22/cgi-bin
binaries (apachectl) :: /usr/local/sbin
start/stop :: /usr/local/etc/rc.d/apache22.sh (start|restart|stop|reload|graceful|gracefulstop|configtest)
/etc/rc.conf variables :: apache22_enable=”YES”
Notes:
Other variables to insert in rc.conf are listed in the comments at the top of the start/stop script
To start 2.2 on freebsd 6.1 the accf_http kernel module must be loaded.
To do this once, run kldload accf_http . To do so at boot time, add
accf_http_load=”YES” to /boot/loader.conf
Apache 2.2.6 in the FreeBSD 6.2 release will start regardless of the
accf_http kernel module being loaded, and by default doesn’t use it. To
reverse this, add apache22_http_accept_enable=”YES” to /etc/rc.conf
(which will cause the kernel module to be loaded and Apache to use it).
FreeBSD 6.1 (Apache 2.0):
ServerRoot :: /usr/local
Config File :: /usr/local/etc/apache2/httpd.conf
DocumentRoot :: /usr/local/www/data
ErrorLog :: /var/log/httpd-error.log
AccessLog :: /var/log/httpd-access.log
cgi-bin :: /usr/local/www/cgi-bin
binaries (apachectl) :: /usr/local/sbin
start/stop :: /usr/local/etc/rc.d/apache2.sh [fast|force|one](start|restart|stop|reload|configtest|rcvar)
/etc/rc.conf variables :: apache2_enable=”YES”
Notes:
Other variables to insert in rc.conf are listed in the comments at the top of the start/stop script
FreeBSD (Apache 1.3):
ServerRoot :: /usr/local
Config File :: /usr/local/etc/apache/httpd.conf
DocumentRoot :: /usr/local/www/data
ErrorLog :: /var/log/httpd-error.log
AccessLog :: /var/log/httpd-access.log
cgi-bin :: /usr/local/www/cgi-bin
binaries (apachectl) :: /usr/local/sbin
start/stop :: /usr/local/etc/rc.d/apache.sh
rc.conf variables :: apache_enable=”YES”
(other variables to insert in rc.conf are listed in the comments at the top of the start/stop script)
Win32 (2.2):
ServerRoot :: “C:/Program Files/Apache Software Foundation/Apache2.2″
Config File :: “C:/Program Files/Apache Software Foundation/Apache2.2/conf/httpd.conf”
DocumentRoot :: “C:/Program Files/Apache Software Foundation/Apache2.2/htdocs”
ErrorLog :: “C:/Program Files/Apache Software Foundation/Apache2.2/logs/error.log”
AccessLog :: “C:/Program Files/Apache Software Foundation/Apache2.2/logs/access.log”
cgi-bin :: “C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin/”
binaries (apachectl) :: “C:/Program Files/Apache Software Foundation/Apache2.2/bin”
Notes;
There are extra config files in “C:/Program Files/Apache Software
Foundation/Apache2.2/conf/extra” that can be included for options such
as vhosts
Solaris 10 (Apache 2.0):
ServerRoot :: /usr/apache2
Config File :: /etc/apache2/httpd.conf
DocumentRoot :: /var/apache2/htdocs
ErrorLog :: /var/apache2/logs/error_log
AccessLog :: /var/apache2/logs/access_log
cgi-bin :: /var/apache2/cgi-bin
binaries :: /usr/apache2/bin
Notes:
Config needs to be copied from example file to httpd.conf. Apache-1.3 is
the default installation in /etc/init.d and /etc/rc3.d files.
Solaris 10 (Apache 1.3):
ServerRoot :: /usr/apache
Config File :: /etc/apache/httpd.conf
DocumentRoot :: /var/apache/htdocs
ErrorLog :: /var/apache/logs/error_log
AccessLog :: /var/apache/logs/access_log
cgi-bin :: /var/apache/cgi-bin
binaries :: /usr/apache/bin
start/stop :: /etc/init.d/apache (start|startssl|sslstart|start-SSL|restart|stop)
Notes:
Config needs to be copied from example file to httpd.conf.
Apache-1.3 is the default installation in /etc/init.d and /etc/rc3.d files. Also Apache Tomcat is included in 1.3 installation.
Slackware 10.1, 10.2 and 11.0 (Apache 1.3):
ServerRoot :: /usr
DocumentRoot :: /var/www/htdocs
AccessLog :: /var/log/apache/access_log
ErrorLog :: /var/log/apache/error_log
binaries (apachectl) :: /usr/sbin
modules :: /usr/libexec/apache
system startup script :: /etc/rc.d/rc.httpd (start|stop|restart|graceful)
Apache config file :: /etc/apache/httpd.conf
mod_ssl config file :: /etc/apache/mod_ssl.conf
php config file :: /etc/apache/mod_php.conf
cgi-bin :: /var/www/cgi-bin
on-line docs (“manual”) :: /var/www/htdocs/manual
proxy cache :: /var/cache/proxy
Slackware 12.0 (Apache 2.2):
ServerRoot :: /usr
DocumentRoot :: /svr/httpd/htdocs
AccessLog :: /var/log/httpd/access_log
ErrorLog :: /var/log/httpd/error_log
binaries (apachectl) :: /usr/sbin
modules :: /usr/lib/httpd
system startup script :: /etc/rc.d/rc.httpd (start|restart|graceful|graceful-stop|stop)
Apache config file :: /etc/httpd/httpd.conf
mod_ssl config file :: /etc/httpd/extra/httpd-ssl.conf
php config file :: /etc/httpd/mod_php.conf
cgi-bin :: /svr/httpd/cgi-bin
on-line docs (“manual”) :: /svr/httpd/htdocs/manual
openSUSE and SLES (Apache 2.2):
ServerRoot :: /srv/www
DocumentRoot :: /srv/www/htdocs
Apache Config File :: /etc/apache2/httpd.conf
Other Config Files :: /etc/sysconfig/apache2
SSL Config File :: /etc/apache2/ssl-global.conf
ErrorLog :: /var/log/apache2/error_log
AccessLog :: /var/log/apache2/access_log
cgi-bin :: /srv/www/cgi-bin
binaries (apachectl) :: /usr/sbin
start/stop :: /etc/init.d/apache2
(start|restart|restart-graceful|reload|graceful|graceful-stop|stop|configtest)
Notes:
Modules are enabled in /etc/sysconfig/apache2 which is read by the
startup script. The a2enmod/a2dismod tool can be used to
activate/deactivate modules.
See /usr/share/doc/packages/apache2/README.SUSE for more information.
Gentoo (Apache 2.2):
ServerRoot :: /usr/lib/apache2
DocumentRoot :: /var/www/localhost/htdocs
Apache Config File :: /etc/apache2/httpd.conf
Other Config Files :: /etc/conf.d/apache2
Default VHost Config :: /etc/apache2/vhosts.d/00_default_vhost.conf
Module Configuration :: /etc/apache2/modules.d
Module Locations :: /usr/lib/apache2/modules
ErrorLog :: /var/log/apache2/error_log
AccessLog :: /var/log/apache2/access_log
cgi-bin :: /var/www/localhost/cgi-bin
binaries (apache2ctl) :: /usr/sbin
start/stop :: /etc/init.d/apache2 (start|restart|graceful|stop|configtest)
常用的Apache路徑
發表評論
所有評論
還沒有人評論,想成為第一個評論的人麼? 請在上方評論欄輸入並且點擊發布.
相關文章
如果同事暗中傷害你,應該怎麼辦?
這個饅頭有餡
2019-02-24 13:59:08
職場中,抱怨越多的員工,越被領導瞧不起!
這個饅頭有餡
2019-02-24 13:59:08
老程序員被裁,應屆生卻能月薪 1.3 萬?這你能忍?
前端高達
2019-02-24 13:48:04
遇到到處蹭吃卻從不請客吃飯的主怎麼辦?
樑軍年
2019-02-24 13:26:35
Linux基本操作命令
wbzjacky
2019-02-24 13:12:38
高標準機房綜合配線安裝
wbzjacky
2019-02-24 13:12:38
IPsec ***實驗
wbzjacky
2019-02-24 13:12:37
真實的模擬***綜合實驗
wbzjacky
2019-02-24 13:12:37
CISCO路由AAA的Easy ***
wbzjacky
2019-02-24 13:12:37
三層交換機的HSRP、vlan、端口聚合
wbzjacky
2019-02-24 13:12:37
CISCO訪問控制列表 企業網絡管理的必殺技
wbzjacky
2019-02-24 13:12:37
HSRP和二層交換機的端口聚合、vlan
wbzjacky
2019-02-24 13:12:37